duct Archives - Sheet Metal Machines

BRAVO Ovalizer Duct Machine

smm-admin — Tue, 23 May 2023 19:48:03 +0000

Bravo Ovalizer Duct machine
Take the advanges of Spiral Duct…. but Ovalized!
Easy Installation
Optimal use of Steel
Smooth Air Flow
The best when building is narrow
Oval Duct is Nice!
A great, complementary machine to our Spiral Duct Forming Machine.

SPECIFICATIONS:
Diameter Range (in.): 16 to 60
Oval Duct Size: H 6-20 in. W 205-90.5 in.
Material Thickness: 0.4 – 1.2 mm (26 ga- 18 ga.) galvanized steel
Effective Length: 120 in. (3 m)
Electrical Connection: 11KW, 220volts/3phase/60Hz

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR

The post BRAVO Ovalizer Duct Machine appeared first on Sheet Metal Machines.

BRAVO TF470 Spiral Duct Forming Machine

smm-admin — Tue, 23 May 2023 19:48:02 +0000

TAKE IT TO THE JOB SITE! DON’T SHIP AIR! You don’t want to ship already formed duct if possible, right. The Bravo Spiral Duct Former is compact, strong and mobile. It is easy to take from one jobsite to another. Producing on-site eliminates the need to ship “air”, it also eliminates the hand cutting to length. Program any length up to 10ft. It will automatically and silently cut (slit) the duct to length.
2200 lb capacity payoff reel.
Control Panel with easy to use interface…programmable in English – Spanish
Length control by Infrared Sensor Switch
Flying Slitter Cut-off System….smooth and quiet.
Plasma Cutting System… special for heavy gauges.
10ft Run Out Table with Automatic Dumping
Receiver table for duct sections dumped from the Run Out Table
Beading Attachment optional (for stiffening lighter gauges)
Two roll formers cassettes to enable duct forming from 26 gauge to 18 gauge galvanized.
Hard Tool Molds, from 4” to 70” (pairs diam)
Forms mild steel, aluminum and stainless
Meets SMACNA Standards
Internationally recognized and available components to include but not limited to:
Schneider Electrics
Siemens PLC and Touchscreen
Delta Inverter
NSK Bearings
Hypertherm Plasma Unit
Expected Performance, based on 10ft sections.
– 0.5 mm (0.020’’) thickness – 100 mm (4”) diameter – 120 Ducts/hour
– 0.7 mm (0.028’’) thickness – 500 mm (20”) diameter – 45 Ducts/hour
– 0.9 mm (0.035’’) thickness – 1250 mm (50”) diameter – 15 Ducts/hour

SPECIFICATIONS:
Capacity: 26 ga. to 18 ga. galvanized mild steel
Power: 220/3/60
Pneumatics required: 100 psi with minimum of 200 l/min.
Strip width: 5.394”
Programmable feed speed range: approx. 0-100 FPM.
Weight: 4,630 lbs
Foot print: 154” x 140” x 70” high

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR

The post BRAVO TF470 Spiral Duct Forming Machine appeared first on Sheet Metal Machines.

BRAVO 6018 18 ga. Rectangular Duct Line

smm-admin — Tue, 23 May 2023 19:47:27 +0000

Make blanks, L, U section or full wrapper duct automatically & cost effectively
Designed and Built for Reliability and Affordability.
AFFORDABLE. Now a CNC rectangular duct line is within the financia! reach of even the smallest HV AC contractor. lt costs less than the contractors new pickup truck and this duct line will pay for itself in labor, material costs and scrap savings in about 10 months (assuming 150,000+ lbs. processed per year)
RELIABLE & SUPPORTABLE … anywhere in the world. No matter where it is used in the world, this duct line has been designed to be able to be supported locally. We build the machine with internationally respected and available components. Whether in Dubai or Johannesburg, parts for this machine are available.
Fast Payback. lf you produce 150,000 lbs. of duct or more in a year, you can expect the savings in material and labor costs to pay for this machine in 10 months or less.
Accuracy. Everything is automatic and precise; servomotor and encoder are better than just using measuring tape.
Always ready. The Bravo 6018 Rect Duct Une beats you to work, does not take lunch or breaks.
Material Savings. Most users save between 18 and 24% on scrap and as much as 20% with coils.
Labor savings = payroll savings. Make duct in a fraction of the time when produced by hand
Uncoiling: One carriage with two 6000 lb. x 60″ wide payoff reels, with expandrels
Touch Screen CNC Controlled
Automatically Feeds off the Coil
Straightens, Beads, Notches (S&Drive, TDC and TDF)
Shears and Brakes to Half Sections or Full Wrapper Duct
Major components include (all well known, respected and available anywhere in the world):
- PLC: Panasonic
- Electrics: Schneider or Siemens
- Rotary Encoder: Nemicon (Japanese)
- Bearings: Torrington, SKF or Koyo
- Hydraulics: Huade (Taiwan)
- Servo motor: Yaskawa
- Touch Screen: Weilun
Note: These components were chosen beca use they are internationally known for very good quality and readily available throughout the world. Not only reliable and affordable, but also SUPPORTABLE)

SPECIFICATIONS:
Capacity: 60″ x 18 Gauge Galvanized
Electrics: 220/3/60 (Standard)
Max duct length: 13 ft
Footprint: 7 ft x 28 ft
Max Coil Weight: 12,000 lbs.
Max Coil Width: 60 in.
Min duct width: 8 in.
Max Thickness of Metal: 18-gauge mild steel
Line Speed: Approx: 0-30 fpm

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR

The post BRAVO 6018 18 ga. Rectangular Duct Line appeared first on Sheet Metal Machines.

JAG Corner Fixer

smm-admin — Tue, 23 May 2023 19:45:51 +0000

Fast, easy corner insertion and crimping in ducts and fittings.
Although the CORNER FIXER is portable and light in weight, it’s heavy on performance, automatically inserting and crimping TDC and TDF corners in seconds. In addition to handling virtually every style of duct, the CORNER FIXER also works with multiple types of straight fittings. Automatic duct squaring for ducts and fittings from 18 – 26 gauge (0.5 – 1.3 mm) galvanized mild steel.

SPECIFICATIONS:
Capacity: 18 – 26 gauge (0.5 – 1.3 mm)
Power: 230 volts, 60 cycle, single phase, AC
Air Pressure: 90 psi
Dimensions: 42”L x 51W” x 54”H (1060 x 1280 x 1360 mm)
Weight: 238 lbs. (108 kg)

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post JAG Corner Fixer appeared first on Sheet Metal Machines.

JAG 16 ga. Seam Closer

smm-admin — Tue, 23 May 2023 19:45:50 +0000

The quiet, automated way to close seams in less than six seconds!
Key features and benefits:
Eliminate hammering to close ductwork seams.
Greatly reduce noise levels and speed up duct seam closing in your shop or at the job site.
Seam Closer will also close both insulated and reinforced ductwork.
Seams from top and bottom to the middle to avoid run out and incomplete seaming.

SPECIFICATIONS:
Capacity: 16 – 24 gauge (0.70 – 1.61 mm)
Duct Length: 1-3/4 – 6-1/2 feet (530 – 1980 mm) of material
Duct Connections: Slip & drive, raw, TDC/F and slip-on flanges
Duct Material: Galvanized mild steel, stainless steel and aluminum
Hydraulics: Self-contained 25 gallons (95 liters)
Motor: 2 HP (1.5 kw) – 220 volts, 60 cycle, three phase, AC
Dimensions: 35”L x 35W” x 111”H (890 x 890 x 2820 mm)
Weight: Machine – 2,230 lbs. (1014 kg), Hydraulic Reservoir – 330 lbs. (150 kg)

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post JAG 16 ga. Seam Closer appeared first on Sheet Metal Machines.

TENNSMITH CB30 30 in. x 20 ga. Cleat Bender

smm-admin — Tue, 23 May 2023 19:44:34 +0000

MADE IN USA
TENNSMITH’S cleat benders are manually operated tools that form uniform drive cleat edges on rectangular duct work in seconds without set up or adjustment. The upper handle forms the cleat and the lower handle opens the tool for easy removal of the material. Heavy cast iron and fabricated steel construction provides long life and trouble-free operation. A TENNSMITH cleat bender can save you time and money.
Stand 105 lbs. (orders over 150 lbs. require freight quote)

SPECIFICATIONS:
Maximum Capacity – Mild Steel: 20 ga
Maximum Bending: 30″
Depth of Drive Cleat: 1/2″
Dimensions, Handles Removed (LxWxH): 38″ x 10″ x 11-1/2″
Shipping Weight: 150 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 3 YEAR – Limited

OPTIONAL ITEMS:
86230: Floor Stand for CB30 Cleat Bender: $400.00

The post TENNSMITH CB30 30 in. x 20 ga. Cleat Bender appeared first on Sheet Metal Machines.

ROPER WHITNEY SR-3016 16 ga. Square-to-Round Duct Former

smm-admin — Tue, 23 May 2023 19:37:33 +0000

The brand-new SR 3016 Square-to-Round Duct Former from Roper Whitney has revolutionized the way square-to-round transitions are formed. Duct connectors can be made quickly and easily, ensuring production in other areas of your shop is not slowed down while your folder is free for other work.
This compact and versatile machine will form a duct fitting in less than two minutes from one piece of metal, with only one joint and no reshaping is required. The SR 3016’s versatility along with its mobility make it ideal on-site or in any HVAC shop
MADE IN USA

SPECIFICATIONS:
Air Requirements: 87 to 102 PSI, regulated and filtered clean air
Min. Diameter: 4″
Max. Creasing Length: 29.3″
Bending Capacity (Mild Steel): 16 ga / 1.6 mm
Dimensions: 34 x 28 x 60
Weight: 150 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post ROPER WHITNEY SR-3016 16 ga. Square-to-Round Duct Former appeared first on Sheet Metal Machines.

TIN KNOCKER TK1660 Duct Beader

smm-admin — Tue, 23 May 2023 23:36:06 +0000

Stop cross braking! Save time, save money
Adjustable beader.
Produce SMACNA approved beads in a fraction of the time it takes to cross brake.
A one man operation
Heavy duty beader comes with five (5) sets of bead tooling that can be located anywhere over the 60″ working length.
Tooling, if broken or damaged, is replaceable without the requirement of replacing an entire cross shaft.
Beads are adjustable in depth to 3/16″ deep.
Powered exit support roll to ensure no material hang-up.

SPECIFICATIONS:
Capacity: 16 Ga. Mild Steel (Galvanized) x 60″ (1.5mm x 152.4cm)
Motor: 1 HP,115V, Single Phase, 60 Hz Standard (230/1/50 available)
Dimensions: Approx. 80″ x 43″ x 34″, Passline Height (203cm x 109cm x 86cm)
Weight: 1,750 lbs (794kg)

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Limited

The post TIN KNOCKER TK1660 Duct Beader appeared first on Sheet Metal Machines.