Saws - Sheet Metal Machines https://sheetmetalmachines.com/product-category/saws/ New Metalworking Machinery and Equipment Sales Thu, 15 Aug 2024 16:29:22 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://sheetmetalmachines.com/wp-content/uploads/2023/10/cropped-Smm_logo_2023_3-fav-32x32.png Saws - Sheet Metal Machines https://sheetmetalmachines.com/product-category/saws/ 32 32 WELLSAW V20F 20 in. Vertical Bandsaw https://sheetmetalmachines.com/product/wellsaw-v20f-20-in-vertical-bandsaw/ Thu, 15 Aug 2024 16:29:22 +0000 https://sheetmetalmachines.com/?post_type=product&p=10095 The WELLSAW V20F Vertical Bandsaw has a 20 inch Throat.
Precision Ground Cast Iron Table with replaceable throat plate.
Unique Heavy Duty Roller Guides. Rotate 90 to accommodate long pieces.
Manufactured in the USA.

The post WELLSAW V20F 20 in. Vertical Bandsaw appeared first on Sheet Metal Machines.

]]>
  • Heavy Tube Steel Frame
  • Precision Ground Cast Iron Table with replaceable throat plate
  • Unique Heavy Duty Roller Guides
    • Rotate 90 to accommodate long pieces
  • Baldor Motor
  • VFD Motor Drive for variable blade speed
  • Magnetic Starter with:
    • Under-voltage and
    • Overload protection
  • 115 Volts at Controls
  • Two Speed Cast Iron Gearbox:
    • with helical gears and oil bath
    • lubrication for quiet operation
  • Blade Speed Indicator
  • Blade Tension Indicator
  • Flexible Arm Worklight
  • Chip Blower (shop air)
  • Removable Chip Tray
  • Tiger-Tooth Bi-Metal Blade
  • OSHA Blade Guarding
  • Rotary Blade Brush
  • MANUFACTURED IN THE USA

    • SPECIFICATIONS:
    Capacity
    Throat: 20 in. Deep
    Table to Guide: 16 in. High

    Blade Size
    Standard: 3/16 in. through 3/4 in.
    Optional: 1/2 in. through 1 in.

    Blade Length: 14 ft 9 in. (177 in.)
    Band Wheels: 21 in. Cast Aluminum with Replaceable Rubber Tires

    Blade Speeds
    Low Range: 45-400 SFPM
    High Range: 325-3000 SFPM

    Blade Guides: Sealed Ball Bearings with 90° Rotation Feature
    Table Size: 26 x 26 in. Cast Iron
    Tilt: 5° Inside and 45° Outside
    Height: 37-1/2 in.

    Drive Motor (specify)
    Three Phase: 3hp, 208/230/460 Volt
    Single Phase: 2hp, 115/208/230 Volt

    Floor Area: 32 Wide x 48 Deep in.
    Height Standard: 83-1/2 in.
    Shipping Weight: 950 lbs.

    OPTIONAL ITEMS:
    *Factory Installed Options Available:
    *Ideal Blade Welder, Grinder and Shear
    *24″ Extended Height (Model V20-24)
    *Miter Gauge
    *Rip Fence, 26″
    *1″ blade (not available on V-20-24)
    *Spray Mist Coolant System
    *Vacuum Nozzle
    *Extension Tables
    *Stock Stand
    *5 ft. and 10 ft. Non-Powered Roller Conveyor
    *NFPA Electrics (w/ fused disconnect)
    *Consult Factory For Additional Options

    Specifications are subject to change without notice.
    NOTE: Data is provided by the manufacturer.
    WARRANTY: 1 YEAR – Parts

    The post WELLSAW V20F 20 in. Vertical Bandsaw appeared first on Sheet Metal Machines.

    ]]>         WELLSAW V20F-24 20 in. Vertical Bandsaw w/24 in. Under the Guide https://sheetmetalmachines.com/product/wellsaw-v20f-24/ Thu, 15 Aug 2024 16:14:38 +0000 https://sheetmetalmachines.com/?post_type=product&p=10089 The WELLSAW V20F-24 Vertical Bandsaw has a 20 inch Throat and 24 in. Under the Guide.
    Precision Ground Cast Iron Table with replaceable throat plate.
    Unique Heavy Duty Roller Guides. Rotate 90 to accommodate long pieces.
    Manufactured in the USA.

    The post WELLSAW V20F-24 20 in. Vertical Bandsaw w/24 in. Under the Guide appeared first on Sheet Metal Machines.

    ]]>
  • Heavy Tube Steel Frame
  • Precision Ground Cast Iron Table with replaceable throat plate
  • Unique Heavy Duty Roller Guides
    • Rotate 90 to accommodate long pieces
  • Baldor Motor
  • VFD Motor Drive for variable blade speed
  • Magnetic Starter with:
    • Under-voltage and
    • Overload protection
  • 115 Volts at Controls
  • Two Speed Cast Iron Gearbox:
    • with helical gears and oil bath
    • lubrication for quiet operation
  • Blade Speed Indicator
  • Blade Tension Indicator
  • Flexible Arm Worklight
  • Chip Blower (shop air)
  • Removable Chip Tray
  • Tiger-Tooth Bi-Metal Blade
  • OSHA Blade Guarding
  • Rotary Blade Brush
  • MANUFACTURED IN THE USA

    • SPECIFICATIONS:
    Capacity
    Throat: 20 in. Deep
    Table to Guide: 24 in. High

    Blade Size
    Standard: 3/16 in. through 3/4 in.
    Optional: —

    Blade Length: 16 ft 1 in. (193 in.)
    Band Wheels: 21 in. Cast Aluminum with Replaceable Rubber Tires

    Blade Speeds
    Low Range: 45-400 SFPM
    High Range: 325-3000 SFPM

    Blade Guides: Sealed Ball Bearings with 90° Rotation Feature
    Table Size: 26 x 26 in. Cast Iron
    Tilt: 5° Inside and 45° Outside
    Height: 37-1/2 in.

    Drive Motor (specify)
    Three Phase: 3hp, 208/230/460 Volt
    Single Phase: 2hp, 115/208/230 Volt

    Floor Area: 32 Wide x 48 Deep in.
    Height Standard: 91-1/2 in.
    Shipping Weight: 1,050 lbs.

    OPTIONAL ITEMS:
    *Factory Installed Options Available:
    *Ideal Blade Welder, Grinder and Shear
    *24″ Extended Height (Model V20-24)
    *Miter Gauge
    *Rip Fence, 26″
    *1″ blade (not available on V-20-24)
    *Spray Mist Coolant System
    *Vacuum Nozzle
    *Extension Tables
    *Stock Stand
    *5 ft. and 10 ft. Non-Powered Roller Conveyor
    *NFPA Electrics (w/ fused disconnect)
    *Consult Factory For Additional Options

    Specifications are subject to change without notice.
    NOTE: Data is provided by the manufacturer.
    WARRANTY: 1 YEAR – Parts

    The post WELLSAW V20F-24 20 in. Vertical Bandsaw w/24 in. Under the Guide appeared first on Sheet Metal Machines.

    ]]>         JLH C-4PRO 14 in. Automatic Circular Bandsaw https://sheetmetalmachines.com/product/jlh-c-4pro-14-in-automatic-circular-bandsaw/ Tue, 23 Jan 2024 22:59:59 +0000 https://sheetmetalmachines.com/?post_type=product&p=8458 JLH 14 inch C-4PRO is a Fully Automatic Circular Bandsaw.
    Controller provides latest in PLC based control technology.
    45 degree Slant-bed design.

    The post JLH C-4PRO 14 in. Automatic Circular Bandsaw appeared first on Sheet Metal Machines.

    ]]>
  • The saw slide and base is a single piece casting. The slide is slanted at a 45° angle. The rough casting is machined in house on a Okuma 5 axis bridge mill. This is just another way JLH Saws provide the upmost in quality and precision.
  • The saw head assemble is a large single piece casting. It is completely machined and assembled in house by JLH master technicians.
  • The shuttle vise system travels on a large liner rail on both sides of the bed. The main bed of the vise assembly is a robust casting. Vises have hardened wear plates installed. A grade C5 ball screw ensures accuracy and long life.
  • Accurate & fast positioning are accomplished through an over-sized C5 grade ball-screw. The head is also used for positioning the saw head assembly.
  • The saw is also equipped with a micro-spray coolant system (MQL). The MQL system has fully adjustable coolant time & volume on it for easy control by any operator. The chip conveyor is a hollow core style controlled by a hydraulic motor.
  • All JLH C-PRO Series Saws use a magazine type loading system. Some will be gravity feed; some will be a flatbed design. JLH Saws uses the highest quality steel and world class components for years of reliable operation.
  • All electrical cabinets are built to international standards. They are well laid out, wired neatly and labeled for ease of repair.
  • JLH Saws Control provides latest in PLC based control technology. JLH Saws Control controls are programmable up to 100 different jobs including quantity and length of cut. The control automatically compensates for kerf loss after data input and requires no manual calculation of number of times to index. The control also automatically shutdowns the machine, blade motor, and hydraulics, once the programmed number of cuts or out of stock situation has been achieved. The system includes an error feedback function enabling rapid troubleshooting through an error code to be displayed in the event of a malfunction.
  • JLH Saws Control Features include:
    • 10″ Touch screen
    • PLC controller
    • 100 individual jobs can be programmed and stored
    • Stored program(s) may be easily recalled and executed at will.
    • Blade Speed Display
    • Optional Blade Deviation Detection monitor can be controlled directly from Touch Screen
    • Automatic Kerf Loss Compensation & Automatic Multiple Indexing up to 999”
    • Error Code Display Provides simplified self-diagnostics.
  • The operator’s control station is ergonomically located on the front side of the saw. It is convenient and user friendly. All operator controls are positioned on the control station and clearly labeled for ease of operation.
  • Fully automatic circular bandsaw
  • 10″ color touch screen HMI
  • PLC controlled color type touch screen display
  • Automatic loading system
  • Mist, dust collector
  • 100 programs to save the all parameters for cutting the same material again
  • ± (0.002″) cutting length precision for straight cut
  • Coolant tank with electric pump for blade lubrication and cooling
  • Micro spray lubrication system for saw blade
  • Automatic lubrication system for linear guides
  • 45° Slant-bed design
  • Grade C-5 ball-screws

    • SPECIFICATIONS:

    MODEL
    C-4PRO
    Maximum Cutting Capacity
    Round
    20-100mm (.787 – 3.937 in.)
    Square
    20-70mm (.787 – 2.755 in.)
    Saw Blade
    Speed
    30~160 RPM
    Size
    360mm φ * 2.6mm T
    Motor Output
    Saw Blade
    20.3 HP
    Hydraulic
    2.9 HP
    Coolant
    3.9 HP
    Oil Tank Capacity
    Hydraulic Oil
    15.8 Gal
    Cutting Liquid
    .5 Gal
    Voltage
    220V / 3P / 60Hz
    Single Feed Stroke
    800mm (31.496″)
    Machine Weight
    9,259 lbs. without loader
    Machine Measurement (LxWxH)
    100 x 87 x 87 in.

    Specifications are subject to change without notice.

    NOTE: Data is provided by the manufacturer.

    3 YEAR WARRANTY – Mechanical Parts
    2 YEAR WARRANTY – Electrical Parts
    1 YEAR WARRANTY – Labor

    The post JLH C-4PRO 14 in. Automatic Circular Bandsaw appeared first on Sheet Metal Machines.

    ]]>         JLH C-3PRO 12 in. Automatic Circular Bandsaw https://sheetmetalmachines.com/product/jlh-c-3pro-automatic-circular-bandsaw/ Tue, 23 Jan 2024 22:50:14 +0000 https://sheetmetalmachines.com/?post_type=product&p=8453 JLH 12 inch C-3PRO is a Fully Automatic Circular Bandsaw.
    Controller provides latest in PLC based control technology.
    45 degree Slant-bed design.

    The post JLH C-3PRO 12 in. Automatic Circular Bandsaw appeared first on Sheet Metal Machines.

    ]]>
  • The saw slide and base is a single piece casting. The slide is slanted at a 45° angle. The rough casting is machined in house on a Okuma 5 axis bridge mill. This is just another way JLH Saws provide the upmost in quality and precision.
  • The saw head assemble is a large single piece casting. It is completely machined and assembled in house by JLH master technicians.
  • The shuttle vise system travels on a large liner rail on both sides of the bed. The main bed of the vise assembly is a robust casting. Vises have hardened wear plates installed. A grade C5 ball screw ensures accuracy and long life.
  • Accurate & fast positioning are accomplished through an over-sized C5 grade ball-screw. The head is also used for positioning the saw head assembly.
  • The saw is also equipped with a micro-spray coolant system (MQL). The MQL system has fully adjustable coolant time & volume on it for easy control by any operator. The chip conveyor is a hollow core style controlled by a hydraulic motor.
  • All JLH C-PRO Series Saws use a magazine type loading system. Some will be gravity feed; some will be a flatbed design. JLH Saws uses the highest quality steel and world class components for years of reliable operation.
  • All electrical cabinets are built to international standards. They are well laid out, wired neatly and labeled for ease of repair.
  • JLH Saws Control provides latest in PLC based control technology. JLH Saws Control controls are programmable up to 100 different jobs including quantity and length of cut. The control automatically compensates for kerf loss after data input and requires no manual calculation of number of times to index. The control also automatically shutdowns the machine, blade motor, and hydraulics, once the programmed number of cuts or out of stock situation has been achieved. The system includes an error feedback function enabling rapid troubleshooting through an error code to be displayed in the event of a malfunction.
  • JLH Saws Control Features include:
    • 10″ Touch screen
    • PLC controller
    • 100 individual jobs can be programmed and stored
    • Stored program(s) may be easily recalled and executed at will.
    • Blade Speed Display
    • Optional Blade Deviation Detection monitor can be controlled directly from Touch Screen
    • Automatic Kerf Loss Compensation & Automatic Multiple Indexing up to 999”
    • Error Code Display Provides simplified self-diagnostics.
  • The operator’s control station is ergonomically located on the front side of the saw. It is convenient and user friendly. All operator controls are positioned on the control station and clearly labeled for ease of operation.
  • Fully automatic circular bandsaw
  • 10″ color touch screen HMI
  • PLC controlled color type touch screen display
  • Automatic loading system
  • Mist, dust collector
  • 100 programs to save the all parameters for cutting the same material again
  • ± (0.002″) cutting length precision for straight cut
  • Coolant tank with electric pump for blade lubrication and cooling
  • Micro spray lubrication system for saw blade
  • Automatic lubrication system for linear guides
  • 45 degree Slant-bed design
  • Grade C-5 ball-screws

    • SPECIFICATIONS:

    MODEL
    C-3PRO
    Maximum Cutting Capacity
    Round
    15-80mm (.590″ – 3.149″)
    Square
    15-60mm (.590″ – 2.363″)
    Saw Blade
    Speed
    30~160 RPM
    Size
    315mm φ * 2.25mm T
    Motor Output
    Saw Blade
    14.9 HP
    Hydraulic
    2.9 HP
    Coolant
    3.9 HP
    Oil Tank Capacity
    Hydraulic Oil
    15.8 Gal
    Cutting Liquid
    .5 Gal
    Voltage
    220V / 3P / 60Hz
    Single Feed Stroke
    800mm (31.496″)
    Machine Weight
    9,259 lbs. without loader
    Machine Measurement (LxWxH)
    100 x 87 x 87 in.

    Specifications are subject to change without notice.

    NOTE: Data is provided by the manufacturer.

    3 YEAR WARRANTY – Mechanical Parts
    2 YEAR WARRANTY – Electrical Parts
    1 YEAR WARRANTY – Labor

    The post JLH C-3PRO 12 in. Automatic Circular Bandsaw appeared first on Sheet Metal Machines.

    ]]>         Saws Double Column Automatic Saw DC12A-NC https://sheetmetalmachines.com/product/saws-double-column-automatic-saw-dc12a-nc/ Tue, 23 May 2023 19:48:15 +0000 https://sheetmetalmachines.com/product/saws-double-column-automatic-saw-dc12a-nc/ Saws 12″ Double Column Automatic Saw DC 12A-NC DC 12 A-NC w/X Smart Technology Double column construction with all moving components on linear bearing guides Precision feeder with gear motor and ballscrew Cabinet panels are hinged for easy cleaning and maintenance Small 2″ scrap end Feeder accuracy +/- 0.005″ per index Easy programmable controls, recall […]

    The post Saws Double Column Automatic Saw DC12A-NC appeared first on Sheet Metal Machines.

    ]]>     Saws 12″ Double Column Automatic Saw DC 12A-NC

    • DC 12 A-NC w/X Smart Technology
    • Double column construction with all moving components on linear bearing guides
    • Precision feeder with gear motor and ballscrew
    • Cabinet panels are hinged for easy cleaning and maintenance
    • Small 2″ scrap end
    • Feeder accuracy +/- 0.005″ per index
    • Easy programmable controls, recall jobs
    • Material sensor
    • LED lighting
    • Variable vise pressure
    • Double vise clamps on both sides of material
    • Vibration free sawing in a range of interrupted and solid materials
    • Blade tension indicator
    • Capacities shown are max envelope. Each individual cutting job must be considered with regards to type and shape of material, and quantity of pieces per day.

    STANDARD EQUIPMENT:

    • One Bi-metal saw blade
    • Low voltage control
    • TEFC 3 phase drive motor
    • Totally enclosed worm gear transmission
    • Full Coolant System
    • Full Blade Guarding
    • Operators Manual Parts List/Schematics
    • Tool kit
    ITEM: 12″ Double Column Automatic Saw
    MANUFACTURER: Saws
    MODEL: DC 12A-NC

    Item/Model: Saws DC 12A-NC

    The post Saws Double Column Automatic Saw DC12A-NC appeared first on Sheet Metal Machines.

    ]]>         Saws Automatic Non Miter High Speed Circular Saw CT350 A-NC NM https://sheetmetalmachines.com/product/saws-automatic-non-miter-high-speed-circular-saw-ct350-a-nc-nm/ Tue, 23 May 2023 19:48:13 +0000 https://sheetmetalmachines.com/product/saws-automatic-non-miter-high-speed-circular-saw-ct350-a-nc-nm/ Saws 14″ Automatic Non Miter High Speed Circular Saw CT350 A-NC NM The CT 350 A-NC family is high speed circular sawing machines designed for high production rates of aluminum extrusions, small aluminum solids, and other non-ferrous materials. A carbide tipped sawblade and spray mist coolant routinely yield rms 50 quality cuts. Double vising provides […]

    The post Saws Automatic Non Miter High Speed Circular Saw CT350 A-NC NM appeared first on Sheet Metal Machines.

    ]]>     Saws 14″ Automatic Non Miter High Speed Circular Saw CT350 A-NC NM

    • The CT 350 A-NC family is high speed circular sawing machines designed for high production rates of aluminum extrusions, small aluminum solids, and other non-ferrous materials. A carbide tipped sawblade and spray mist coolant routinely yield rms 50 quality cuts. Double vising provides safety and quality.
    • Compound manual mitering up to 45 degrees
    • Feeder length 20″ , multiple indexes
    • Feeder is faster than standard machine
    • Scrap end 2″ on non mitering
    • Single speed motor (3600rpm)
    • Easy setup
    • Feeder accuracy +/- 0.005″ per index
    • Job memory
    • 3′ conveyor section on infeed side
    • Optional Chip Vac – 1100CFM designed to collect upto 85% of chips.
    • Double suction points
    • Capacities shown are max envelope. Each individual cutting job must be considered with regards to type and shape of material, and quantity of pieces per day.

    STANDARD EQUIPMENT:

    • One Carbide tipped saw blade
    • Low voltage control
    • TEFC 3 phase drive motor
    • Spray Mist Coolant System
    • Full Blade Guarding
    • Operators Manual Parts List/Schematics
    • Tool kit
    • Top Clamp
    ITEM: 14″ Automatic Non Miter High Speed Circular Saw
    MANUFACTURER: Saws
    MODEL: CT 350 A-NC NM

    Item/Model: Saws CT350 A-NC NM

    The post Saws Automatic Non Miter High Speed Circular Saw CT350 A-NC NM appeared first on Sheet Metal Machines.

    ]]>         Saws Fully Automatic Cold Saw C370A-NC https://sheetmetalmachines.com/product/saws-fully-automatic-cold-saw-c370a-nc/ Tue, 23 May 2023 19:48:12 +0000 https://sheetmetalmachines.com/product/saws-fully-automatic-cold-saw-c370a-nc/ Saws 14.5″ Fully Automatic Cold Saw C370A-NC The C370A-NC is a rugged, heavy-duty vertical column circular sawing machine. Vertical column constructions provides extremely stable saw frame guidance and stability with vibration free sawing! Feeder accuracy +/- 0.005 per index Feeder length 20″ on standard version, 50″ on extended version (optional), multiple indexes Scrap end 7″ […]

    The post Saws Fully Automatic Cold Saw C370A-NC appeared first on Sheet Metal Machines.

    ]]>     Saws 14.5″ Fully Automatic Cold Saw C370A-NC

    • The C370A-NC is a rugged, heavy-duty vertical column circular sawing machine. Vertical column constructions provides extremely stable saw frame guidance and stability with vibration free sawing!
    • Feeder accuracy +/- 0.005 per index
    • Feeder length 20″ on standard version, 50″ on extended version (optional), multiple indexes
    • Scrap end 7″
    • Infinitely variable blade speeds offer flexibility to fine tune the settings for sawing even the most difficult materials.
    • The operators control is one of the easiest to use programmable saw control on the market.
    • Stores frequent jobs for fast recall
    • Capacities shown are max envelope. Each individual cutting job must be considered with regards to type and shape of material, and quantity of pieces per day.

    STANDARD EQUIPMENT:

    • One HSS saw blade
    • Low voltage control
    • TEFC 3 phase drive motor
    • Totally enclosed worm gear transmission
    • Full Coolant System
    • Full Blade Guarding
    • Operators Manual Parts List/Schematics
    • Tool kit
    • Pull out chip tray
    • Top clamp
    ITEM: 14.5″ Fully Automatic Cold Saw
    MANUFACTURER: Saws
    MODEL: C 370 A-NC

    Item/Model: Saws C 370 A-NC

    The post Saws Fully Automatic Cold Saw C370A-NC appeared first on Sheet Metal Machines.

    ]]>         Saws Automatic Mitering Cold Saw CT350A-NC https://sheetmetalmachines.com/product/saws-automatic-mitering-cold-saw-ct350a-nc/ Tue, 23 May 2023 19:48:12 +0000 https://sheetmetalmachines.com/product/saws-automatic-mitering-cold-saw-ct350a-nc/ Saws 14″ Automatic Mitering Cold Saw CT350A-NC The CT 350 A-NC family is high speed circular sawing machines designed for high production rates of aluminum extrusions, small aluminum solids, and other non-ferrous materials. A carbide tipped sawblade and spray mist coolant routinely yield rms 50 quality cuts. Double vising provides safety and quality. Compound manual […]

    The post Saws Automatic Mitering Cold Saw CT350A-NC appeared first on Sheet Metal Machines.

    ]]>     Saws 14″ Automatic Mitering Cold Saw CT350A-NC

    • The CT 350 A-NC family is high speed circular sawing machines designed for high production rates of aluminum extrusions, small aluminum solids, and other non-ferrous materials. A carbide tipped sawblade and spray mist coolant routinely yield rms 50 quality cuts. Double vising provides safety and quality.
    • Compound manual mitering up to 45 degrees
    • Feeder length 20″ on standard version, 47″ on extended version (optional), multiple indexes
    • Scrap end 14″ (2″ on non mitering version)
    • Single speed motor (3600rpm)
    • Easy setup
    • Feeder accuracy +/- 0.005″ per index
    • Job memory
    • 3′ conveyor section on infeed side
    • Optional Chip Vac – 1100CFM designed to collect upto 85% of chips.
    • Capacities shown are max envelope. Each individual cutting job must be considered with regards to type and shape of material, and quantity of pieces per day.

    STANDARD EQUIPMENT:

    • One Carbide tipped saw blade
    • Low voltage control
    • TEFC 3 phase drive motor
    • Spray Mist Coolant System
    • Full Blade Guarding
    • Operators Manual Parts List/Schematics
    • Tool kit
    ITEM: 14″ Automatic Mitering Cold Saw
    MANUFACTURER: Saws
    MODEL: CT 350A-NC

    Item/Model: Saws CT 350A-NC

    The post Saws Automatic Mitering Cold Saw CT350A-NC appeared first on Sheet Metal Machines.

    ]]>         KALAMAZOO K16-18WR 18 in. Wire Rope Chop Saw https://sheetmetalmachines.com/product/kalamazoo-k16-18wr-wire-rope-chop-saw/ Tue, 23 May 2023 19:47:39 +0000 https://sheetmetalmachines.com/product/kalamazoo-k16-18wr-wire-rope-chop-saw/ The K16-18WR 18 inch wire rope chop saw is a straight cut chop saw designed to be on a low portable cart that’s low to the ground so the operator doesn’t have to lift the cable and or steel rope to standard table height which will improve over all productivity.

    The post KALAMAZOO K16-18WR 18 in. Wire Rope Chop Saw appeared first on Sheet Metal Machines.

    ]]>
  • The K16-18WR 18 inch wire rope chop saw is a straight cut chop saw designed to be on a low portable cart that’s low to the ground so the operator doesn’t have to lift the cable and or steel rope to standard table height which will improve over all productivity.
  • Kalamazoo Industries K16-18WR 18 inch wire rope saw comes equipped with a quick release foot operated chain vise that’s designed to securely hold your your cable in a v-block and yet quickly release your material once you lift your foot off the pedal, 15HP 3PH motor, 1″ spindle flange, mobil cart with locking casters, half moon wheel guard, cast iron saw arm, cast iron trunnion, v-belts, belt guard and magnetic on-off switch.
  • The K16-18WR is available with 20HP 3PH motor (pricing will vary).
  • 15HP 3PH motor.
  • 1 inch spindle arbor.
  • Manual saw arm.
  • Cast iron saw arm.
  • Cast iron trunnion.
  • Magnetic on-off switch.
  • Foot operated chain vise with v-block.
  • Heavy duty mobile cart with locking casters.
  • All parts that Kalamazoo Industries manufacture’s for the 18 inch wire rope cutoff saw are replaceable no matter the age of this unit. All parts are kept in stock.
  • The K16-18WR 18 inch rope saw is used in the following industries: Energy, Wire Cable Factories, Hydraulic Hose Manufacturing Companies, Oil/Natural Gas, Petro/Chemical as well as many other Manufacturing and Fabrication environments.
  • This abrasive saw is great for steel cable and and wire rope manufacturers.

    • SPECIFICATIONS:
    Abrasive Chop Saw Wheel: Houses 16″ to 18″
    Motor: 15HP 3PH; Optional 20HP 3PH motor (call for pricing).
    Spindle Arbor: 1″
    Shipping Dimensions: L 28″ X W 20″ X H 40″
    Approximate Shipping Weight: 650 lbs.

    Specifications are subject to change without notice.
    NOTE: Data is provided by the manufacturer.
    WARRANTY: 1 YEAR – Parts

    OPTIONAL ITEMS:
    Optional 20HP 3PH motor (call for pricing).

    The post KALAMAZOO K16-18WR 18 in. Wire Rope Chop Saw appeared first on Sheet Metal Machines.

    ]]>         SCOTCHMAN SUP-600 ANGLEMASTER 24 in. Non-Ferrous Upcut Circular Cold Saw w/AngleMaster Measuring System https://sheetmetalmachines.com/product/scotchman-sup-600-anglemaster-non-ferrous-upcut-circular-cold-saw-w-anglemaster-measuring-system/ Tue, 23 May 2023 19:47:24 +0000 https://sheetmetalmachines.com/product/scotchman-sup-600-anglemaster-non-ferrous-upcut-circular-cold-saw-w-anglemaster-measuring-system/ This SUP-600 NF Upcut cold saw has been coupled with AngleMaster technology and is now a true production saw.
    It is programmable and will feed material, cut multiple angles at different part lengths and more with a push of a button.
    This Upcut Circular Cold Saw is designed specifically for cutting non-ferrous material and features a 24" (600mm), 132 tooth carbide blade which is capable of producing round cuts up to 9" in diameter and rectangular cuts up to 15" x 6", the SUP-600 NF offers an increased cutting capacity not found in traditional pivot down saws.

    The post SCOTCHMAN SUP-600 ANGLEMASTER 24 in. Non-Ferrous Upcut Circular Cold Saw w/AngleMaster Measuring System appeared first on Sheet Metal Machines.

    ]]>
  • Coupling this saw with our new AngleMaster measuring system, creates a semi-automatic programmable saw system that automatically rotates to any cut angle, pushes the material into the saw and automatically rotates to the next desired angle. (It gives you a completely finished part.) Plus, you can store cut lists in its 21″ touch screen control. A MUST SEE for the aluminum extrusion market.
  • Standard features include an adjustable feed rate, mitering capability with fixed stops at 22.5 degrees, 45 degrees, 90 degrees, -45 degrees and -22.5 degrees, two horizontal and two vertical pneumatic clamps to secure material being cut and a 4-1/2″ port for chip collection plus a drawer under the bottom of the saw. The SUP-600 NF is available in 230 volt and 460 volt configurations and is backed by Scotchman’s superior warranty.
  • Non-Ferrous Upcut Saw designed for Aluminum, PVC, Copper, etc.
  • The AngleMaster System Push Feeds your Stock to the Miter Saw which is Automatically Rotated to the Angle Designated for your Part. Right to Left Feed Only!
  • Feed Available – 10′ to 30′
  • Touch Screen Controls
  • Software (Includes Profile Screen)
  • Job Storage
  • Precision Miter Upcut non-ferrous Saw
  • Powered Safety Hood with Safety Switch that will not allow Saw to run with Hood Open
  • Blade Door with Safety Interlock Switch
  • Dual Palm Buttons
  • Adjustable Feed Rate on Saw Head
  • Two Horizontal Pneumatic Clamps
  • Two Vertical Pneumatic Clamps
  • Miter Capability
  • Capable of Slotting
  • One Gallon Coolant
  • Coolant Tank with Mist Lubrication
  • One 24″ (600 mm) diameter, 132-tooth Carbide Blade (SUP-600 NF)
  • One Blade Wrench
  • Air Hose
  • Chip Collection Drawer in Base and a 4-3/4″ Chip Collection Port
  • Adjustable Leveling Pads
  • 230 or 460 volt/3-ph electrics, (must specify voltage)
  • Two-year Warranty on Parts (SUP Saw)
  • One-year Warranty on Parts (AngleMaster)
  • Saw made in Spain/AngleMaster made in Ames, IA

    • SPECIFICATIONS:

    Cutting Capacities
    90°
    Round
    8″ (203 mm)
    Square
    7″ (178 mm)
    Rectangle
    9 x 5″ (228 x 127 mm)
    45°
    Round
    7″ (177 mm)
    Square
    6″ (152 mm)
    Rectangle
    7″ x 4-3/4″ (178 x 120 mm)
    Cutting Speed
    3,000 RPM
    Motor Rate
    5.5 HP
    Factory Wired (SPECIFY)
    230V 3-ph OR 460V 3-ph
    Maximum Diameter Blade
    24″ (600 mm) (SUP 600)
    Arbor Bore
    1.97″ (50 mm)
    Dimensions
    Width
    51-1/4″ (SUP-600)
    Depth
    48″ (SUP-600)
    Height
    (Top of Hood) 64-3/8″ (SUP 600)
    Height
    (From Floor to Vise) 38-5/8″ (970 mm)
    Shipping Weight
    1,102 lbs. (500 kg) [SUP 600]

    Specifications are subject to change without notice.
    NOTE: Data is provided by the manufacturer.
    WARRANTY: 2 YEAR – Parts (SUP Saw) / 1 YEAR – Parts (AngleMaster)

    OPTIONAL ITEMS: CALL FOR PRICE:

    • Carbide-Tipped Blades
    • Carbide-Tipped Blade Sharpening
    • Chip Vacuum – V-460: Ideal for collecting steel, dust, aluminum and plastic shavings.
      • Standard features include:
      • 27 gallon storage with quick release handle
      • Air filter shaker turbine
      • 2hp motor
      • 706 cfm air flow through a 4″ inlet

    The post SCOTCHMAN SUP-600 ANGLEMASTER 24 in. Non-Ferrous Upcut Circular Cold Saw w/AngleMaster Measuring System appeared first on Sheet Metal Machines.

    ]]>