SCOTCHMAN SUP-600 ANGLEMASTER 24 in. Non-Ferrous Upcut Circular Cold Saw w/AngleMaster Measuring System

Call for Price

This SUP-600 NF Upcut cold saw has been coupled with AngleMaster technology and is now a true production saw.
It is programmable and will feed material, cut multiple angles at different part lengths and more with a push of a button.
This Upcut Circular Cold Saw is designed specifically for cutting non-ferrous material and features a 24″ (600mm), 132 tooth carbide blade which is capable of producing round cuts up to 9″ in diameter and rectangular cuts up to 15″ x 6″, the SUP-600 NF offers an increased cutting capacity not found in traditional pivot down saws.

SKU: SUP-600 ANGLEMASTER Category: Tags: , , ,


  • Coupling this saw with our new AngleMaster measuring system, creates a semi-automatic programmable saw system that automatically rotates to any cut angle, pushes the material into the saw and automatically rotates to the next desired angle. (It gives you a completely finished part.) Plus, you can store cut lists in its 21″ touch screen control. A MUST SEE for the aluminum extrusion market.
  • Standard features include an adjustable feed rate, mitering capability with fixed stops at 22.5 degrees, 45 degrees, 90 degrees, -45 degrees and -22.5 degrees, two horizontal and two vertical pneumatic clamps to secure material being cut and a 4-1/2″ port for chip collection plus a drawer under the bottom of the saw. The SUP-600 NF is available in 230 volt and 460 volt configurations and is backed by Scotchman’s superior warranty.
  • Non-Ferrous Upcut Saw designed for Aluminum, PVC, Copper, etc.
  • The AngleMaster System Push Feeds your Stock to the Miter Saw which is Automatically Rotated to the Angle Designated for your Part. Right to Left Feed Only!
  • Feed Available – 10′ to 30′
  • Touch Screen Controls
  • Software (Includes Profile Screen)
  • Job Storage
  • Precision Miter Upcut non-ferrous Saw
  • Powered Safety Hood with Safety Switch that will not allow Saw to run with Hood Open
  • Blade Door with Safety Interlock Switch
  • Dual Palm Buttons
  • Adjustable Feed Rate on Saw Head
  • Two Horizontal Pneumatic Clamps
  • Two Vertical Pneumatic Clamps
  • Miter Capability
  • Capable of Slotting
  • One Gallon Coolant
  • Coolant Tank with Mist Lubrication
  • One 24″ (600 mm) diameter, 132-tooth Carbide Blade (SUP-600 NF)
  • One Blade Wrench
  • Air Hose
  • Chip Collection Drawer in Base and a 4-3/4″ Chip Collection Port
  • Adjustable Leveling Pads
  • 230 or 460 volt/3-ph electrics, (must specify voltage)
  • Two-year Warranty on Parts (SUP Saw)
  • One-year Warranty on Parts (AngleMaster)
  • Saw made in Spain/AngleMaster made in Ames, IA


Cutting Capacities
8″ (203 mm)
7″ (178 mm)
9 x 5″ (228 x 127 mm)
7″ (177 mm)
6″ (152 mm)
7″ x 4-3/4″ (178 x 120 mm)
Cutting Speed
3,000 RPM
Motor Rate
5.5 HP
Factory Wired (SPECIFY)
230V 3-ph OR 460V 3-ph
Maximum Diameter Blade
24″ (600 mm) (SUP 600)
Arbor Bore
1.97″ (50 mm)
51-1/4″ (SUP-600)
48″ (SUP-600)
(Top of Hood) 64-3/8″ (SUP 600)
(From Floor to Vise) 38-5/8″ (970 mm)
Shipping Weight
1,102 lbs. (500 kg) [SUP 600]

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 2 YEAR – Parts (SUP Saw) / 1 YEAR – Parts (AngleMaster)


  • Carbide-Tipped Blades
  • Carbide-Tipped Blade Sharpening
  • Chip Vacuum – V-460: Ideal for collecting steel, dust, aluminum and plastic shavings.
    • Standard features include:
    • 27 gallon storage with quick release handle
    • Air filter shaker turbine
    • 2hp motor
    • 706 cfm air flow through a 4″ inlet

Additional information

Weight 1102 lbs



Scotchman Metal Fabicating Solutions sells 13 models of American-made hydraulic ironworkers; cold saws, pipe notchers, hydraulic presses and measuring tools.