Bravo - Sheet Metal Machines https://sheetmetalmachines.com/brand/bravo/ New Metalworking Machinery and Equipment Sales Thu, 22 Feb 2024 15:37:25 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.1 https://sheetmetalmachines.com/wp-content/uploads/2023/10/cropped-Smm_logo_2023_3-fav-32x32.png Bravo - Sheet Metal Machines https://sheetmetalmachines.com/brand/bravo/ 32 32 BRAVO 26-18 ga. Hydraulic Round Elbow Machine https://sheetmetalmachines.com/product/bravo-hydraulic-round-elbow-machine/ Tue, 23 May 2023 19:48:03 +0000 https://sheetmetalmachines.com/product/bravo-hydraulic-round-elbow-machine/ BRAVO 50 inch Hydraulic Round Elbow Machine makes elbows cost effectively.
Bravo gore locking machine.
Two stations on one machine, one for flanging and the other for closing.
Produce standing lock seams and reducers fast, easy and affordable.

The post BRAVO 26-18 ga. Hydraulic Round Elbow Machine appeared first on Sheet Metal Machines.

]]>
  • Bravo gore locking machine.
  • Make your own elbows….and cost effectively!
  • Consider the Bravo Hydraulic Round Elbow Machine. Two stations on one machine, one for flanging and the other for closing. The machine is always ready to go, No tool change required. Produce standing lock seams and reducers fast, easy and affordable. On par with but a fraction of the cost of the popular brand.
  • A great, complementary machine to our Spiral Duct Forming Machine.

    • SPECIFICATIONS:

    Diameter Range
    5″ to 50″
    Max segment angel
    30 degrees (90 degree elbow, 4 parts)
    Material Thickness
    galvanized steel
    0.4 – 1.2 mm (26 – 18 Ga)
    Flanging Speed
    Max. Adjustable to 120 m/min.
    (394 fpm)
    Production Time
    90 sec.
    (bend ø 200 mm, 90°/4 segments)
    Electrical Connection
    4KW, 220volts/3phase/60Hz

    Specifications are subject to change without notice.
    NOTE: Data is provided by the manufacturer.
    WARRANTY: 1 YEAR

    The post BRAVO 26-18 ga. Hydraulic Round Elbow Machine appeared first on Sheet Metal Machines.

    ]]>         BRAVO Ovalizer Duct Machine https://sheetmetalmachines.com/product/bravo-ovalizer-duct-machine/ Tue, 23 May 2023 19:48:03 +0000 https://sheetmetalmachines.com/product/bravo-ovalizer-duct-machine/ BRAVO 60 inch Ovalizer Duct Machine
    Easy Installation. Optimal use of Steel. Smooth Air Flow
    A great, complementary machine to our Spiral Duct Forming Machine.

    The post BRAVO Ovalizer Duct Machine appeared first on Sheet Metal Machines.

    ]]>
  • Bravo Ovalizer Duct machine
  • Take the advanges of Spiral Duct…. but Ovalized!
  • Easy Installation
  • Optimal use of Steel
  • Smooth Air Flow
  • The best when building is narrow
  • Oval Duct is Nice!
  • A great, complementary machine to our Spiral Duct Forming Machine.

    • SPECIFICATIONS:
    Diameter Range (in.): 16 to 60
    Oval Duct Size: H 6-20 in. W 205-90.5 in.
    Material Thickness: 0.4 – 1.2 mm (26 ga- 18 ga.) galvanized steel
    Effective Length: 120 in. (3 m)
    Electrical Connection: 11KW, 220volts/3phase/60Hz

    Specifications are subject to change without notice.
    NOTE: Data is provided by the manufacturer.
    WARRANTY: 1 YEAR

    The post BRAVO Ovalizer Duct Machine appeared first on Sheet Metal Machines.

    ]]>         BRAVO TF470 Spiral Duct Forming Machine https://sheetmetalmachines.com/product/bravo-tf470-spiral-duct-forming-machine/ Tue, 23 May 2023 19:48:02 +0000 https://sheetmetalmachines.com/product/bravo-tf470-spiral-duct-forming-machine/ BRAVO TF470 Spiral Duct Forming Machine has a capacity of 26 gauge to 18 gauge galvanized mild steel.
    Compact, strong and mobile. It is easy to take from one jobsite to another. Producing on-site eliminates the need to ship “air”, it also eliminates the hand cutting to length. Program any length up to 10ft. It will automatically and silently cut (slit) the duct to length.
    Control Panel with easy to use interface…programmable in English – Spanish. 10ft Run Out Table with Automatic Dumping

    The post BRAVO TF470 Spiral Duct Forming Machine appeared first on Sheet Metal Machines.

    ]]>
  • TAKE IT TO THE JOB SITE! DON’T SHIP AIR! You don’t want to ship already formed duct if possible, right. The Bravo Spiral Duct Former is compact, strong and mobile. It is easy to take from one jobsite to another. Producing on-site eliminates the need to ship “air”, it also eliminates the hand cutting to length. Program any length up to 10ft. It will automatically and silently cut (slit) the duct to length.
  • 2200 lb capacity payoff reel.
  • Control Panel with easy to use interface…programmable in English – Spanish
  • Length control by Infrared Sensor Switch
  • Flying Slitter Cut-off System….smooth and quiet.
  • Plasma Cutting System… special for heavy gauges.
  • 10ft Run Out Table with Automatic Dumping
  • Receiver table for duct sections dumped from the Run Out Table
  • Beading Attachment optional (for stiffening lighter gauges)
  • Two roll formers cassettes to enable duct forming from 26 gauge to 18 gauge galvanized.
  • Hard Tool Molds, from 4” to 70” (pairs diam)
  • Forms mild steel, aluminum and stainless
  • Meets SMACNA Standards
  • Internationally recognized and available components to include but not limited to:
  • Schneider Electrics
  • Siemens PLC and Touchscreen
  • Delta Inverter
  • NSK Bearings
  • Hypertherm Plasma Unit
  • Expected Performance, based on 10ft sections.
  • – 0.5 mm (0.020’’) thickness – 100 mm (4”) diameter – 120 Ducts/hour
    – 0.7 mm (0.028’’) thickness – 500 mm (20”) diameter – 45 Ducts/hour
    – 0.9 mm (0.035’’) thickness – 1250 mm (50”) diameter – 15 Ducts/hour

    • SPECIFICATIONS:
    Capacity: 26 ga. to 18 ga. galvanized mild steel
    Power: 220/3/60
    Pneumatics required: 100 psi with minimum of 200 l/min.
    Strip width: 5.394”
    Programmable feed speed range: approx. 0-100 FPM.
    Weight: 4,630 lbs
    Foot print: 154” x 140” x 70” high

    Specifications are subject to change without notice.
    NOTE: Data is provided by the manufacturer.
    WARRANTY: 1 YEAR

    The post BRAVO TF470 Spiral Duct Forming Machine appeared first on Sheet Metal Machines.

    ]]>         BRAVO 6018 18 ga. Rectangular Duct Line https://sheetmetalmachines.com/product/bravo-6018-rectangular-duct-line/ Tue, 23 May 2023 19:47:27 +0000 https://sheetmetalmachines.com/product/bravo-6018-rectangular-duct-line/ BRAVO 6018 Rectangular Duct Line a capacity of 60 inch x 18 gauge mild steel max thickness.
    Make blanks, L, U section or full wrapper duct automatically & cost effectively.
    Accuracy. Everything is automatic and precise; servomotor and encoder are better than just using measuring tape.
    Touch Screen CNC Controlled. Automatically Feeds off the Coil. Straightens, Beads, Notches (S&Drive, TDC and TDF)

    The post BRAVO 6018 18 ga. Rectangular Duct Line appeared first on Sheet Metal Machines.

    ]]>
  • Make blanks, L, U section or full wrapper duct automatically & cost effectively
  • Designed and Built for Reliability and Affordability.
  • AFFORDABLE. Now a CNC rectangular duct line is within the financia! reach of even the smallest HV AC contractor. lt costs less than the contractors new pickup truck and this duct line will pay for itself in labor, material costs and scrap savings in about 10 months (assuming 150,000+ lbs. processed per year)
  • RELIABLE & SUPPORTABLE … anywhere in the world. No matter where it is used in the world, this duct line has been designed to be able to be supported locally. We build the machine with internationally respected and available components. Whether in Dubai or Johannesburg, parts for this machine are available.
  • Fast Payback. lf you produce 150,000 lbs. of duct or more in a year, you can expect the savings in material and labor costs to pay for this machine in 10 months or less.
  • Accuracy. Everything is automatic and precise; servomotor and encoder are better than just using measuring tape.
  • Always ready. The Bravo 6018 Rect Duct Une beats you to work, does not take lunch or breaks.
  • Material Savings. Most users save between 18 and 24% on scrap and as much as 20% with coils.
  • Labor savings = payroll savings. Make duct in a fraction of the time when produced by hand
  • Uncoiling: One carriage with two 6000 lb. x 60″ wide payoff reels, with expandrels
  • Touch Screen CNC Controlled
  • Automatically Feeds off the Coil
  • Straightens, Beads, Notches (S&Drive, TDC and TDF)
  • Shears and Brakes to Half Sections or Full Wrapper Duct
  • Major components include (all well known, respected and available anywhere in the world):
    • PLC: Panasonic
    • Electrics: Schneider or Siemens
    • Rotary Encoder: Nemicon (Japanese)
    • Bearings: Torrington, SKF or Koyo
    • Hydraulics: Huade (Taiwan)
    • Servo motor: Yaskawa
    • Touch Screen: Weilun
  • Note: These components were chosen beca use they are internationally known for very good quality and readily available throughout the world. Not only reliable and affordable, but also SUPPORTABLE)

    • SPECIFICATIONS:
    Capacity: 60″ x 18 Gauge Galvanized
    Electrics: 220/3/60 (Standard)
    Max duct length: 13 ft
    Footprint: 7 ft x 28 ft
    Max Coil Weight: 12,000 lbs.
    Max Coil Width: 60 in.
    Min duct width: 8 in.
    Max Thickness of Metal: 18-gauge mild steel
    Line Speed: Approx: 0-30 fpm

    Specifications are subject to change without notice.
    NOTE: Data is provided by the manufacturer.
    WARRANTY: 1 YEAR

    The post BRAVO 6018 18 ga. Rectangular Duct Line appeared first on Sheet Metal Machines.

    ]]>