Description
With a 1” plate steel framework and plenty of time-saving features, this hydraulic press sets the standard by which all other models should be measured.
- 110-ton capacity.
- 42.12” working width.
- 8.66” diameter cylinder with 11.8” stroke.
- Runs on 220-volt 3-phase power.
- 7.5 hp motor can push all 110 tons of force without strain.
- cylinder moves left or right within the framework so you can apply force for off-center projects.
- 2-speed down movement (rapid or slow descent) with pressure regulator.
- 6.3” chrome piston automatically returns to top position after the job is done.
- Welded steel construction maintains accuracy, holding up under the machine’s full force without flexing.
- Baileigh backs this hydraulic shop press with a 1-year parts warranty.
- Our experienced team of reps will also provide lifetime technical support by phone.
Recommended for: General assembly, straightening work, and pressing bearings in and out of their housings.
SPECIFICATIONS:
Return Speed: .393″ / sec.
Maximum Pressure: 3858 psi
Piston Head Diameter: 4.72″
Pump Speed: 1.5 / 5.17 gal/min.
Oil Capacity: 7.92 gal
Working Speed: .106″ / sec.
Working Width: 36.22″
System Oil Capacity: 3.17 gal
Lowering Speed: .362″ / sec.
Maximum Capacity: 110 Tons
Cylinder Stroke: 15.75″
Cylinder Movable: Yes
Cylinder Diameter: 10″
RPM: 3,000
Motor: 7.5 HP
Power Requirement: 220V / 3 phase
Shipping Dimensions (L/W/H): 67″ / 37” / 84”
Shipping Weight: 3,400 lbs
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
