SPECIFICATIONS:
Maximum thickness of material processed: 0.030 in.
Maximum crimp width: 1-1/2 in.
Bead diameter outside, large bead: 1/4 in.
Bead diameter outside, small bead: 1/8 in.
Maximum distance from bead center to edge: 1-1/2 in.
Thickness range of bench top for mounting: 3/4 to 3-1/2 in.
Dimensions Approx.: 26 x 16 x 12 in.
Shipping weight: 28 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post TIN KNOCKER TK 2 in 1 Crimper Beader appeared first on Sheet Metal Machines.

SPECIFICATIONS:
SKU: 1400P
Tonnage: 8
Power Source: Manual

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: Limited

OPTIONAL ITEMS:

• The Arc-Fit Housing holds Arc-Fit Assemblies, which is the punch and die that produces the notch. To notch with our Arc-Fit tools, you need a Housing, and Assembly and a Press to provide power. The charts below indicate the maximum capacity of each housing. You may order many assemblies for each housing, or one housing for each assembly. This eliminates change over time and increase efficiency. Hardware and springs are included with each housing. The 201A Punch Press Adaptor is used to mount (1) Arc-Fit Housing in Vogel’s Hydraulic Press, we also offer a turntable that fits our Hydraulic Press that includes (3) housings.
• An Arc-Fit Assembly consists of three pieces, the round punch, square punch holder and rectangular die (tube rest). When worn, (typically 10,000 – 20,000 notches or more), you can send your punch and die to Vogel for sharpening, or simply replace just the worn items.
• How it works: The tube is slid onto the tube rest, over the punch. As the punch and punch holder are depressed, the punch notches the bottom wall of the tube. The tube is rotated 180º and the first notch, now on the top of the tube, is visually aligned with the scribe lines on the punch holder. The 2nd notch is made and the tube is ready for welding or brazing. These spring-loaded tools may be powered by most press brakes, ironworkers, punch presses. The #35 Housing can be powered by Vogel’s Hand or Hydraulic Presses. The #35 & #75 Housings can be powered by Vogel’s Hydraulic Press, see the charts below.
• In addition to notching a tube or pipe to fit the same size OD, we can make custom Arc-Fit assemblies. Examples of some of the many custom assemblies we can offer include:
  • One size tube to fit a different size
  • Custom shaped slots
  • Notches with drainholes and more

  Please contact us to discuss your specialized notching application.

• To notch pipe or notch tubing with our Arc-Fit system, you need a Housing, an Assembly for each pipe notching or tube notching application, and a Press to provide power. Some 90 degree Arc-Fit Assemblies can be powered by Vogel’s affordable and portable Hand Press. We also offer a 120V Hydraulic Power Unit. You can also install our Arc-Fit Housing and Assemblies in your own ironworker, press brake or punch press.
• How does an Arc-Fit Assembly work? Your tube or pipe is slid, horizontally, over the tube rest and onto the punch. The square punch holder functions as a stop, to insure every notch is the same depth.
• The press pushes the punch & punch holder downward, through the bottom wall of your material. The tube rest is also a cutting edge, supporting the underside of your material, preventing deformation. In most cases (round pipe fitting round pipe, for example), the material is rotated 180° and a second notch made. Simple scribe lines on the punch holder help line up the material for the second notch. Arc-Fit tools are designed for many years of use. We frequently hear from customers replacing tools that have been in service for 10, 15, 20 years and longer.
• Please Note: An Arc-Fit assembly can be used for the same OD, but thinner wall. For example, if you want to notch 1-1/2″ OD x 18 gauge, choose our 16 gauge assembly. Over the past eight decades, we have made thousands of custom Arc-Fit assemblies to suit specific applications. Examples of custom Arc-Fit assemblies include notching applications such as:
  • A gauge not shown below
  • One size notched to fit a different size
  • Larger sizes, up to 6-5/8″ OD
  • Square or rectangular tubes notched to fit round
  • A notch to fit another tube with an drainhole

  Please contact us to discuss your specific custom notching application. The list below is only our most popular notching tools that fit our #35 Housing (tubes and pipes that are 2-3/8″ or smaller OD). If you want to notch larger sizes (up to 6″ OD!), please contact us to discuss your specific notching applications. Assemblies for schedule 1″ through 2″ x schedule 40 pipe are offered at the lowest prices. Why? Because these are our most popular sizes, we build them in very large quantities and we are able to pass the savings on to you.

• **All Arc-Fits with an “A” designation after the part number (i.e. 9205A) are designed for mild steel or stainless pipe or tubing. Pipe that deviates from ASTM standards, with properties such as increased yield strength, or tubing made of HSLA materials high-strength alloys will exceed the capacity of our tooling and cannot be successfully notched with the Arc-Fit process. Use of our tools in these situations is NOT recommended and can result in tool failure and risk of injury.
• **It is the customer’s responsibility to ensure that the material is appropriate and suitable for Vogel tools. Material issues interfering with Vogel tool performance are not considered a manufacturing defect and will not be covered under Vogel’s product warranty. Returns will not be accepted for tools damaged by use with inappropriate materials.

The post VOGEL TOOL & DIE 1400 Arc-Fit Manual Pipe Notching Press appeared first on Sheet Metal Machines.

ACCESSORIES INCLUDED:

• Hose Kit Assembly
• Hose Cord Assembly
• Spanner
• Spanner 12
• Sub Handle Assembly
• Chip Guard Ass’y
• Tool Box
• 22mm Punch and Die mounted on machine
• 4mm Allen Wrench
• 5mm Allen Wrench

SPECIFICATIONS:
Max. Punching Diameter: 1-1/16″
Max. Punching Thickness: 5/8″ *, 1/4″ for 304 Stainless Steel
Max. Output: 52 Tons
Max. Throat Depth: 4-5/16″
Hole Making Time: Punching Time 11.8 sec., Returning Time 5.7 sec.
Allowable Max. Pressure: 10,000 psi
Weight: 66 lbs.

*1″ and 1-1/16″ punch requires the use of a split lock nut (UHA9936-0) and reduces the maximum thickness to 9/16″
In case of mild steel maximum punching thickness must be decided based on the equation of 0.8 x punching diameter. For details see the instruction manual.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post NITTO KOHKI SELFER ACE 52 Ton Portable Double-acting Hydraulic Puncher HS11-1624 appeared first on Sheet Metal Machines.

ACCESSORIES INCLUDED:

• UEA0850-0 pilot pin 5/16″ x 2″ DOC
• 3mm allen wrench
• 4mm allen wrench
• 8mm x 10mm combination spanner
• Chip guard assembly
• Motor side handle
• Sample cutting fluid
• Safety chain
• Molded plastic carrying case

SPECIFICATIONS:

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post NITTO KOHKI WA-5000 2 in. Portable Automatic Magnetic Drilling Machine appeared first on Sheet Metal Machines.

ACCESSORIES INCLUDED:

• UEA0835-0 pilot pin 5/16″ x 2″ DOC
• 3mm allen wrench
• 5mm allen wrench
• 8mm x 10mm combination spanner
• Motor side handle
• Feed handles (3 each)
• Chip guard assembly
• Safety chain
• Molded plastic carrying case
• Sample Cutting Fluid

SPECIFICATIONS:

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post NITTO KOHKI UOJ-5500 2-3/16 in. Portable Manual Feed Magnetic Drilling Machine appeared first on Sheet Metal Machines.

ACCESSORIES INCLUDED:

• UEA0835-0 pilot pin 5/16″ x 1-3/8″ DOC
• 3mm allen wrench
• 8mm x 10mm combination spanner
• Chip guard assembly
• Motor side handle
• Sample cutting fluid
• Safety chain
• Molded plastic carrying case

The post NITTO KOHKI WA-3500 1-3/8 in. Portable Automatic Magnetic Drilling Machine appeared first on Sheet Metal Machines.

ACCESSORIES INCLUDED:

• UEA0835-0 pilot pin 5/16″ x 1-3/8″ DOC
• 3mm allen wrench
• 5mm allen wrench
• 8mm x 10mm combination spanner
• Motor side handle
• Feed handles (3 each)
• Chip guard assembly
• Safety chain
• Molded plastic carrying case

The post NITTO KOHKI UOJ-3500 1-3/8 in. Portable Manual Feed Magnetic Drilling Machine appeared first on Sheet Metal Machines.

SPECIFICATIONS:
Capacity: 18 – 26 gauge (0.5 – 1.3 mm)
Power: 230 volts, 60 cycle, single phase, AC
Air Pressure: 90 psi
Dimensions: 42”L x 51W” x 54”H (1060 x 1280 x 1360 mm)
Weight: 238 lbs. (108 kg)

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post JAG Corner Fixer appeared first on Sheet Metal Machines.

Efficiency

• • An inverter allows this saw to run on 115V single phase power driven by a durable three phase motor.
  • Quick locking vise is easy to adjust to clamp various material sizes.
  • Large protractor for accurate and fast angle cuts
  • Easily converts from Horizontal to Vertical configuration providing maximum cutting flexibility with included Vertical Support Table.
  • Locking casters and robust rear wheels deliver effortless movement around the shop.
  • Wire blade brush prevents chip build up in the blade guides providing cleaner cuts
  • Removable chip tray for easy disposal of waste material

Performance

• • Dual mitering head produces quick & easy angle cuts to up to 45⁰ both left and right
  • Electronic Variable Speed (EVS) allows for the adjustment of blade speed “on the fly” while cutting providing access to a wider range of cutting materials
  • Hydraulic down feed control is easily adjustable allowing users to match feed rate to a variety of sizes & types of materials
  • Integrated coolant system produces cleaner cuts and extends the life of your blade

Safety

• • Fully guarded blade can be used in both Horizontal and Vertical configuration ensuring operator safety
  • CSA/CUS: Following strict guidelines and electrical requirements, this Baileigh saw is CSA/CUS certified
  • Automatic shut off stops the sawing process once a cut is completed
  • Baileigh covers this metal band saw with a 1-year parts warranty.
  • Both the saw and replacement parts are usually in stock for fast deliveries.
  • Lifetime technical support by phone lets you call our knowledgeable reps up whenever you need troubleshooting or advice on applications.

SPECIFICATIONS:
Motor Hp: 1
Coolant System: Yes
Return: Manual
Miter Adjustment: Swivel Head
Miter Angle: 0 – 45° Left and Right
Capacity Round 90°: 10″
Capacity Square 90°: 8″ x 8″
Capacity Rectangle 90°: 8″ x 9″
Capacity Round 45°: 6.5″
Capacity Square 45°: 5.5″ x 5.5″
Capacity Rectangle 45°: 8″ x 5.5″
Table Height: Horizontal – 28.75″ / Vertical – 34.875″
Blade Guide: Carbide x Roller
Blade Size: 1″ x .035″ x 120″
Blade Speed (fpm): 88 – 270 Variable
Max. Vise Opening: 10″
Descent Control: Hydraulic
Coolant Pump: 1/8 HP
Drive: Belt
Power: 115V
Shipping Dimensions: 61″ x 30″ x 46″
Shipping Weight: 584 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post BAILEIGH BS-10VS 10 in. Portable EVS Dual Mitering Bandsaw appeared first on Sheet Metal Machines.

SPECIFICATIONS:
Motor: 1 HP
Power: 110V
Shipping Dimensions: 20″ x 12″ x 12″
Shipping Weight: 22 lbs

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post BAILEIGH CM-10P 10mm Portable Beveling Machine appeared first on Sheet Metal Machines.