Description
- Standard Industrial is 100% Owned, Operated and Manufactured In The U.S.A.
- Full-Tonnage Throughout Stroke
- Typical 30+ Year Lifetime, Plus a Lifetime of Parts and Service Availability
- Solid, Non-Moveable Lower Beam Substantially More Rigid Than “Bed Level”
press Brakes - +,- .001″ Ram Repeatability
- Off-center loading Capability
- The Most Heavy Duty Press Brake Built In The U.S.A.
- Extremely Heavy-duty lower beams allowing the least amount of deflection.
Less Deflection = Longer Tool Life = More profitability - Precision mechanical in-line depth stop as back-up for any CNC control
- Single Cylinder Hydra-Mechanical Drive System
- New Manifold Based Hydraulic System
- *Contact Sheet Metal Machines if overall heights are critical.
- *Bed heights can be lowered with full machine pits
- *Contact Sheet Metal Machines for specifications on other size brakes
STANDARD EQUIPMENT:
- Easy to read mechanical ram level indicator and simple, precise ram level adjustment
- Counterbalance valve for punching and blanking to provide minimum shock
- Mechanical in-line depth stop to set the top limit, the speed change and a micrometer adjustable lower limit for the most precision bends
- All parts are readily available from your local suppliers-off the shelf parts for a lifetime
- All parts are listed in the press brake manual with detailed drawings and the original manufacturers part number so you can always find parts for your press brake
- Hydraulic reservoir with oil filter—Oil is not included
- Electric disconnect switch with magnetic starter—Simply run your power to the box
- Full tonnage the entire length of the bed and ram
- Full tonnage throughout the stroke—Full tonnage is developed anywhere in slow speed
- Both ends of ram tapped to accept your four way die lifters
- Incredibly simple and versatile hydraulic and electric controls
- Spring loaded die clamps for easy, quick die change
- Ram readily accepts standard or safety tang dies—Can optionally be fitted to accept European tooling
- Positive single cylinder hydra-mechanical drive system
- Electric anti-whip control for your operators safety
- Overload protection to avoid damaging the press brake
- Shock-less, quite operation
- Fully adjustable stroke, open height and speed change
- Extremely heavy duty, rigid, all steel unitized frame
- Lube fittings at all bearing points
- All liquid tight electrical components
- (2) 24″ support/gauging arms
- Hydraulic pressure tonnage control with gauge
- Die groove in bed with set screws in front and rear of brake bed
- Portable 2 hand control station with normal-inch (jog) modes, E-stop and palm buttons
- All Standard Industrial press brakes are stringently designed to meet O.S.H.A and ANSI B11.3 standards as well come complete with J.I.C. type and U.L. listed electrical components
SPECIFICATIONS:
|
MODEL*
|
AB100-6
|
AB100-8
|
AB100-10
|
AB100-12
|
AB100-14
|
AB100-16
|
AB100-20
|
|
Form/Punching Tonnage
|
100/66
|
||||||
|
Bed Ram Length
|
6′
|
8′
|
10′
|
12′
|
14′
|
16′
|
20′
|
|
Distance between Housings
|
4′-5″
|
6′-5″
|
8′-5″
|
10′-5″
|
12′-5″
|
14′-5″
|
18′-5″
|
|
Open Height
|
13″
|
||||||
|
Stroke Length
|
6″
|
||||||
|
Closed Height
|
7″
|
||||||
|
Below Grade
|
—
|
No
|
Yes
|
||||
|
Approach Press Return
|
—
|
15 h.p. 103-22-233
|
|||||
|
Throat Depth
|
6″
|
||||||
|
Bed Width
|
—
|
4″
|
|||||
|
Weight
(prox. lbs.) |
12,000
|
15,000
|
19,000
|
21,000
|
26,000
|
32,000
|
50,000
|
*Contact Sheet Metal Machines if overall heights are critical.
*Bed heights can be lowered with full machine pits
*Contact Sheet Metal Machines for specifications on other size brakes
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 5 YEAR – STANDARD: Parts & Limited Labor
