universal Archives - Sheet Metal Machines https://sheetmetalmachines.com/product-tag/universal/ New Metalworking Machinery and Equipment Sales Mon, 18 May 2026 18:23:15 +0000 en-US hourly 1 https://wordpress.org/?v=7.1 https://sheetmetalmachines.com/wp-content/uploads/2023/10/cropped-Smm_logo_2023_3-fav-32x32.png universal Archives - Sheet Metal Machines https://sheetmetalmachines.com/product-tag/universal/ 32 32 HM MACHINERY 4 ft x 12 ga. Universal Manual Brake | HM HS-3S-3SH https://sheetmetalmachines.com/product/hm-machinery-hm-hs3s3sh/ Mon, 02 Dec 2024 17:09:12 +0000 https://sheetmetalmachines.com/?post_type=product&p=10953 Quality European Machinery
Discounted FREIGHT on the NEW HM Machines – Please call for discounted freight rate.
The HS-3S-3SH Universal Manual Brake is a 50 inch, 12 gauge universal brake with segmented top and bottom bending surfaces.
The HS-3S-3SH brake allows bending in inverse directions, enabling special profiles, such as boxes and pans, to be formed.
Equipped with 13 segments of angled tooling on both top and bottom bending surfaces.

The post HM MACHINERY 4 ft x 12 ga. Universal Manual Brake | HM HS-3S-3SH appeared first on Sheet Metal Machines.

]]>
  • The HS-3S-3SH Universal Manual Brake is a 50 inch, 12 gauge universal brake with segmented top and bottom bending surfaces. The HS-3S-3SH brake allows bending in inverse directions, enabling special profiles, such as boxes and pans, to be formed.
  • HM Machinery Superflex machines are heavy duty, with fully welded construction. Foot-operated control of the clamp bar ensures extremely fast and simple operation and allows both hands to be kept free for adjustment of the material being folded.
  • Precision ground tooling creates straight, clean bends every time.
  • Equipped with 13 segments of tooling on both top and bottom bending surfaces.
  • Precise material positioning is made possible with a foot-operated clamping mechanism, allowing the operator to use both hands to handle and position material
  • Repeat angle stop enables easily repeatable bends.
  • The lift handle is ergonomically designed and operable from either side of the machine, allowing flexibility while fabricating complex shapes and profiles.

    • SPECIFICATIONS:
    Maximum Bend Length: 50 in.
    Maximum Material Capacity: 12 Gauge Mild Steel
    Maximum Opening: 1.78 in.
    Maximum Folding Angle: 100-150 Degrees (depending on profile)
    Approx. Shipping Dimensions: 63 W x 36 D x 50 H in.
    Approx. Shipping Weight: 915 lbs.

    Specifications are subject to change without notice.
    NOTE: Data is provided by the manufacturer.
    WARRANTY: 1 YEAR – Limited

    VIDEO:
    Sheet Metal Machines YouTube Channel: Watch It Now

    The post HM MACHINERY 4 ft x 12 ga. Universal Manual Brake | HM HS-3S-3SH appeared first on Sheet Metal Machines.

    ]]>         KALAMAZOO A1 5C Collet Indexing Fixture https://sheetmetalmachines.com/product/kalamazoo-a1-universal-5c-index-fixture/ Tue, 23 May 2023 19:42:30 +0000 https://sheetmetalmachines.com/product/kalamazoo-a1-universal-5c-index-fixture/ The 5C multi position is a heavy duty fixture designed to be used in heavy use work environments.  Can be used in tool rooms, small and large machine shops.  The head where the collet and or chuck is mounted to be adjusted from 0 degree to 100+ degrees.  Cast iron and steel go into producing this fixture so if maintained properly will last along time.

    The post KALAMAZOO A1 5C Collet Indexing Fixture appeared first on Sheet Metal Machines.

    ]]>
  • The 5C multi position is a heavy duty fixture designed to be used in heavy use work environments.  Can be used in tool rooms, small and large machine shops.  The head where the collet and or chuck is mounted to be adjusted from 0 degree to 100+ degrees.  Cast iron and steel go into producing this fixture so if maintained properly will last along time.
  • Universal indexer with 24 space ring, 5C Collet taper in spindle nose.
  • Takes 4″ chuck, 3 jaw, (not included) #3434 chuck.
  • Head can be angled from 0 deg. to 100+ deg.
  • Indexes quickly and easily, spindle locks in positive position.
  • Can be dismantled in seconds for easy cleaning. Changing index rings gives numerous combinations of divisions.
  • Spindle locks with index pin and/or horseshoe rings at rear of spindle.
  • For drill presses, milling machines, grinders and layout work.
  • 22 lbs.
  • Made in USA !!!
  • Model: A1

    • SPECIFICATIONS:

    MODEL
    Description
    Weight (lbs.)
    A1
    Universal – Indexer with 24 Space Ring
    22
    AT
    Standard Tailstock
    11
    3434
    4″ 3-Jaw Universal Chuck
    4.5
    AR-0
    Index Ring-Blank
    0.25
    AR-20
    Index Ring-20 Spaces
    AR-36
    Index Ring-36 Spaces

    Specifications are subject to change without notice.
    NOTE: Data is provided by the manufacturer.
    WARRANTY: 1 YEAR – Parts

    OPTIONAL ITEMS: CALL FOR PRICE
    AT tailstock. # AT
    3 jaw chuck, # 1034
    Blank index ring # AR-O
    20 space index ring # AR20
    36 space index ring # AR36

    The post KALAMAZOO A1 5C Collet Indexing Fixture appeared first on Sheet Metal Machines.

    ]]>         KALAMAZOO S612V 6×48 in./12 in. Combination Sander with Vacuum Base https://sheetmetalmachines.com/product/kalamazoo-s612v-combination-sander-with-vacuum-base/ Tue, 23 May 2023 19:40:25 +0000 https://sheetmetalmachines.com/product/kalamazoo-s612v-combination-sander-with-vacuum-base/ The S612V is a universal belt and disc sander that works with all sanding belt and disc configurations so you can get your required finish. This combination sander comes with a multi-point sanding head, powerful motor, platen, vacuum base, and adjustable work tables to help you set your angles. Made in the USA.

    The post KALAMAZOO S612V 6×48 in./12 in. Combination Sander with Vacuum Base appeared first on Sheet Metal Machines.

    ]]>
  • The S612V is a universal belt and disc sander that works with all sanding belt and disc configurations so you can get your required finish. This combination sander comes with a multi-point sanding head, powerful motor, platen, vacuum base, and adjustable work tables to help you set your angles.
  • Made in the USA
  • Belt size: 6 x 48 inches
  • 3HP 1PH 220 OR 3HP 3PH 220 and or 440 volt TEFC motor.
  • An on/off push magnetic button switch.
  • Steel base with built-in 100 CFM dust collector with a replaceable filter
  • Quick change belt, pre-tensioned one lever belt change
  • Belt Sander multi-position horizontal/vertical
  • Dual v-belt driven

    • DESIGNED TO DO THE FOLLOWING:

      • Beveling
      • Deburring
      • Squaring-up ends
      • Round flat corners
      • Polishing
      • Rust removal
      • Material clean up
      • Roughing
      • Flatwork

    SPECIFICATIONS:

    Belt Dimensions
    6 x 48 in.
    Belt Machine
    Work Table –
    Cast iron
    6 x 10 in. with 5/8th slot
    Platen – Steel
    6-1/2 x 14 in.
    Belt Speed
    2,800 SFPM
    Disc Machine
    Work table –
    Cast Iron
    7.75 x 16.5 inch with 5/8th slot
    Disc Diameter
    12 in.
    Arbor
    5/8 in.
    Disc Speed
    2,500 SFPM
    Steel reversible and replaceable platen
    6-1/2 x 14 in.
    Disc worktable dimensions
    L12 x W14 x H 60 in.
    Motor
    3HP, 1PH, 220 OR
    3HP, 3PH, 220 and/or 440 volt, TEFC motor.
    Amps
    3PH FLA 230V 8 amps / 460v 4 amps.
    1PH FLA 115V 24 amps / 230V 12 amps
    Vacuum motor
    3PH 230V 2 amps and 460V 1 amp.
    1PH 230V (only) 3.5 amps
    Shipping Weight
    425 lbs.
    Shipping Dimensions
    L 45 x W 33 x H 65 in.

    Specifications are subject to change without notice.
    NOTE: Data is provided by the manufacturer.
    WARRANTY: 1 YEAR – Parts

    The post KALAMAZOO S612V 6×48 in./12 in. Combination Sander with Vacuum Base appeared first on Sheet Metal Machines.

    ]]>         BIRMINGHAM BPV-3949 9 x 49 in. Variable Speed Vertical Knee Mill https://sheetmetalmachines.com/product/birmingham-variable-speed-vertical-knee-mill-bpv-3949/ Tue, 23 May 2023 19:48:00 +0000 https://sheetmetalmachines.com/product/birmingham-variable-speed-vertical-knee-mill-bpv-3949/ SPECIAL PRICES WHILE SUPPLIES LAST!

    EMAIL FOR FREIGHT QUOTES

    The Birmingham BPV-3949 is a Variable Speed Vertical Knee Milling Machine with a 9 x 49 inch table size and an R8 Spindle.

    The post BIRMINGHAM BPV-3949 9 x 49 in. Variable Speed Vertical Knee Mill appeared first on Sheet Metal Machines.

    ]]>     SPECIFICATIONS:
    Table Size: 9 x 49 in.
    Table Load Capacity: 661 lbs.
    Longitudinal Travel (X): 33-1/4in.
    Cross Travel (Y): 14-1/5 in.
    Vertical Travel (Z): 15-3/4 in.
    Distance from table to spindle: 2-3/8 – 18-1/5 in.
    Ram Travel: 12-3/4 in.
    Quill Diameter: 3-3/8 in.
    Quill Travel: 5 in.
    Quill Feed: 0.0015, 0.003, 0.006 in./rev.
    Spindle Speed: Vari-speed 60-4200rpm
    Spindle Taper: R8 (NT30)
    Spindle Motor: 3 HP
    Head Tilting: Forward & Back: ±45°, Right & Left: ± 90°
    Guiding Tracks, X.Y.X.: ▲.▲.▲
    Machine Dimension (L x W x H): 57 x 63 x 83 in.
    Machine Weight: 1,924 lbs.
    Weight of wooden package: 309 lbs.

    Specifications are subject to change without notice.
    NOTE: Data is provided by the manufacturer.
    WARRANTY: 1 YEAR – Parts

    OPTIONAL ITEMS:

    • 2 Axis IMPORT DRO X and Y axis installed…………………… $825.00
    • PF-150X , X AXIS POWER FEED installed………………………$700.00
    • CK-58 ( 58 PCS ) CLAMPING KIT……………………………………$125.00
    • R-8 Set (11 PCS) R8 COLLET SET………………………………..$125.00
    • AV-6 VISE 6″……………………………………………………………………$250.00

    The post BIRMINGHAM BPV-3949 9 x 49 in. Variable Speed Vertical Knee Mill appeared first on Sheet Metal Machines.

    ]]>         HM MACHINERY 4 ft x 16 ga. Universal Brake | HM HS 3S-S https://sheetmetalmachines.com/product/hm-machinery-hm-hs3ss/ Tue, 23 May 2023 19:47:00 +0000 https://sheetmetalmachines.com/product/hm-machinery-universal-manual-foot-clamp-box-and-pan-brake-w-upper-and-lower-segmented-tooling/ Quality European Machinery
    Discounted FREIGHT on the NEW HM Machines - Please call for discounted freight rate.
    The HM Machinery HS-3S-S 4 ft x 16 ga Universal Brake is a large scale brake with segmented tooling.
    Designed for the fabrication of box and pan and other special profiles, including those with inverse bends.
    The Superflex is a durable manual brake with a stout base for floor mounting in high production environments.

    The post HM MACHINERY 4 ft x 16 ga. Universal Brake | HM HS 3S-S appeared first on Sheet Metal Machines.

    ]]>
  • The HM Machinery HS-3S-S 4ft x 16 ga Universal Brake is a large scale brake with segmented tooling, designed for the fabrication of box and pan and other special profiles, including those with inverse bends. The Superflex is a durable manual brake with a stout base for floor mounting in high production environments, where it can produce high quality and consistent complex bends.
  • Precision ground tooling creates straight, clean bends every time.
  • Equipped with 13 segments of tooling on both top and bottom bending surfaces.
  • Precise material positioning is made possible with a foot-operated clamping mechanism, allowing the operator to use both hands to handle and position material
  • Repeat angle stop enables easily repeatable bends.
  • The lift handle is ergonomically designed and operable from either side of the machine, allowing flexibility while fabricating complex shapes and profiles.

    • SPECIFICATIONS:
    Maximum Bend Length: 50 in.
    Maximum Material Capacity: 16-Gauge Mild Steel
    Maximum Opening: 1.78 in.
    Maximum Folding Angle: 100 or 150 Degrees (depending on profile)
    Approx. Shipping Dimensions: 63 x 36 x 50 in.
    Approx. Shipping Weight: 915 lbs.

    Specifications are subject to change without notice.
    NOTE: Data is provided by the manufacturer.
    WARRANTY: 1 YEAR – Limited

    VIDEO:
    Sheet Metal Machines YouTube Channel: Watch It Now

    The post HM MACHINERY 4 ft x 16 ga. Universal Brake | HM HS 3S-S appeared first on Sheet Metal Machines.

    ]]>