STANDARD FEATURES:

• 29.5 INCH SERVO MOTORIZED BACK GAUGE SYSTEM
• 700W servo drive and motor with +/- 0,1 mm accuracy
• 32/32 thread ballscrew system with +/- 0,05 mm accuracy
• Aluminum sigma profile sheet support
• One fixed, one movable, full body protective, vertical light barriers
• Side fences to avoid unwanted interventions
• ERCUT NC CONTROL SYSTEM
• HMI – 7 inch TFT display touchscreen with 800×480 resolution
• Ethercat + USB inputs and IP65 protection class
• 128 MB memory for 10.000 programmes with 10 steps
• Manual, semi-automatic and automatic functions
• Parametrical settings for retraction, pneumatic support and backgauge
• Language selection (specific languages can be imported)
• FRICTION FREE GUILLOTINE BLADE GEOMETRY AND DUAL SIDED BLADES
• Thanks to the curvy machined blade geometry, blades never touch each other which sustains a much more longer blade life without sacrificing cutting precision.
• Both sides of the blades can be used by switching easily
• 2525 – 3220 – 4015  series do not have/need blade gap adjustment, all thicknesses can be done with the same fixed adjustment
• 2540 and 3240 series have manual mechanical blade gap adjustment function
• SPRING LOADED HOLD-DOWN BAR AND POLYURETHANE MATERIAL CLAMPING SURFACE
• Thanks to the spring load, the sheet is clamped and fixed with an ideal pressure for cutting
• With the polyurethane touching surface (shown in red below), your material is never scratched
• FIXED SIDE SQUARING GAUGE AND STAINLESS FEEDING TABLE WITH RULERS ON EACH 19.68 INCH LENGTH
• RETRACTABLE FRONT SHEET SUPPORT BAR
• From the cutting line to the edge, it is able to support max 36.6 inch long sheets
• Smooth and light movement only by pulling from the middle
• LED ILLUMINATION OF CUTTING AREA AND CUTTING LINE

SPECIFICATIONS:
MODEL: EMS 4015
Sheet Length: 159 in. (13.25 ft)
Mild Steel: 0.059 in.
Stainless: 0.039 in.
Aluminum: 0.078 in.
Dimensions: 67 x 187 x 63 in.
Weight: 7,385 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS:

• 39 inch NC motorized back gauge system
• 0-180° angular cutting device
• Pneumatic sheet support system
• Blade set as spares

• PNEUMATIC SHEET SUPPORT TO PROCESS REAR DROP OR FRONT DROP
• PNEUMATIC SHEET SUPPORT AS FRONT AND REAR DROP IN THE SAME CYCLE (NC CONTROLLED)
• BACK GAUGE EXTENSION TO 39 INCH
• SIDE GAUGE EXTENSION TO 2 MT
• BLANK SHEET WAGON WITH WHEELS (2204.6 LBS LOADING CAPACITY)
• VARIABLE ANGULAR CUTTING SUPPORT
• CUTTING LINE LASER INDICATOR

The post ERBEND EMS 4015 13ft x 0.059 in. NC Motorized Shear appeared first on Sheet Metal Machines.

STANDARD FEATURES:

• 29.5 INCH SERVO MOTORIZED BACK GAUGE SYSTEM
• 700W servo drive and motor with +/- 0,1 mm accuracy
• 32/32 thread ballscrew system with +/- 0,05 mm accuracy
• Aluminum sigma profile sheet support
• One fixed, one movable, full body protective, vertical light barriers
• Side fences to avoid unwanted interventions
• ERCUT NC CONTROL SYSTEM
• HMI – 7 inch TFT display touchscreen with 800×480 resolution
• Ethercat + USB inputs and IP65 protection class
• 128 MB memory for 10.000 programmes with 10 steps
• Manual, semi-automatic and automatic functions
• Parametrical settings for retraction, pneumatic support and backgauge
• Language selection (specific languages can be imported)
• FRICTION FREE GUILLOTINE BLADE GEOMETRY AND DUAL SIDED BLADES
• Thanks to the curvy machined blade geometry, blades never touch each other which sustains a much more longer blade life without sacrificing cutting precision.
• Both sides of the blades can be used by switching easily
• 2525 – 3220 – 4015  series do not have/need blade gap adjustment, all thicknesses can be done with the same fixed adjustment
• 2540 and 3240 series have manual mechanical blade gap adjustment function
• SPRING LOADED HOLD-DOWN BAR AND POLYURETHANE MATERIAL CLAMPING SURFACE
• Thanks to the spring load, the sheet is clamped and fixed with an ideal pressure for cutting
• With the polyurethane touching surface (shown in red below), your material is never scratched
• FIXED SIDE SQUARING GAUGE AND STAINLESS FEEDING TABLE WITH RULERS ON EACH 19.68 INCH LENGTH
• RETRACTABLE FRONT SHEET SUPPORT BAR
• From the cutting line to the edge, it is able to support max 36.6 inch long sheets
• Smooth and light movement only by pulling from the middle
• LED ILLUMINATION OF CUTTING AREA AND CUTTING LINE

SPECIFICATIONS:
MODEL: EMS 3220
Sheet Length: 125.9 in. (10.5 ft)
Mild Steel: 0.078 in.
Stainless: 0.047 in.
Aluminum: 0.118 in.
Dimensions: 67 x 144 x 51 in.
Weight: 6,834 lbs.

MODEL: EMS 3240
Sheet Length: 125.9 in. (10.5 ft)
Mild Steel: 0.157 in.
Stainless: 0.098 in.
Aluminum: 0.236 in.
Dimensions: 67 x 144 x 51 in.
Weight: 7,055 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS:

• 39 inch NC motorized back gauge system
• 0-180° angular cutting device
• Pneumatic sheet support system
• Blade set as spares

• PNEUMATIC SHEET SUPPORT TO PROCESS REAR DROP OR FRONT DROP
• PNEUMATIC SHEET SUPPORT AS FRONT AND REAR DROP IN THE SAME CYCLE (NC CONTROLLED)
• BACK GAUGE EXTENSION TO 39 INCH
• SIDE GAUGE EXTENSION TO 2 MT
• BLANK SHEET WAGON WITH WHEELS (2204.6 LBS LOADING CAPACITY)
• VARIABLE ANGULAR CUTTING SUPPORT
• CUTTING LINE LASER INDICATOR

The post ERBEND EMS 3220/EMS 3240 10ft NC Motorized Shears appeared first on Sheet Metal Machines.

STANDARD FEATURES:

• 29.5 INCH SERVO MOTORIZED BACK GAUGE SYSTEM
• 700W servo drive and motor with +/- 0,1 mm accuracy
• 32/32 thread ballscrew system with +/- 0,05 mm accuracy
• Aluminum sigma profile sheet support
• One fixed, one movable, full body protective, vertical light barriers
• Side fences to avoid unwanted interventions
• ERCUT NC CONTROL SYSTEM
• HMI – 7 inch TFT display touchscreen with 800×480 resolution
• Ethercat + USB inputs and IP65 protection class
• 128 MB memory for 10.000 programmes with 10 steps
• Manual, semi-automatic and automatic functions
• Parametrical settings for retraction, pneumatic support and backgauge
• Language selection (specific languages can be imported)
• FRICTION FREE GUILLOTINE BLADE GEOMETRY AND DUAL SIDED BLADES
• Thanks to the curvy machined blade geometry, blades never touch each other which sustains a much more longer blade life without sacrificing cutting precision.
• Both sides of the blades can be used by switching easily
• 2525 – 3220 – 4015  series do not have/need blade gap adjustment, all thicknesses can be done with the same fixed adjustment
• 2540 and 3240 series have manual mechanical blade gap adjustment function
• SPRING LOADED HOLD-DOWN BAR AND POLYURETHANE MATERIAL CLAMPING SURFACE
• Thanks to the spring load, the sheet is clamped and fixed with an ideal pressure for cutting
• With the polyurethane touching surface (shown in red below), your material is never scratched
• FIXED SIDE SQUARING GAUGE AND STAINLESS FEEDING TABLE WITH RULERS ON EACH 19.68 INCH LENGTH
• RETRACTABLE FRONT SHEET SUPPORT BAR
• From the cutting line to the edge, it is able to support max 36.6 inch long sheets
• Smooth and light movement only by pulling from the middle
• LED ILLUMINATION OF CUTTING AREA AND CUTTING LINE

SPECIFICATIONS:
MODEL: EMS 2525
Sheet Length: 100 in. (8.3 ft)
Capacity – Steel: 0.098 in.
Capacity – Stainless: 0.059 in.
Capacity – Aluminum: 0.157 in.
Dimensions: 67 x 124 x 51 in.
Weight: 4,850 lbs.

MODEL: EMS 2540
Sheet Length: 100 in. (8.3 ft)
Capacity – Steel: 0.157 in.
Capacity – Stainless: 0.098 in.
Capacity – Aluminum: 0.236 in.
Dimensions: 67 x 124 x 51 in.
Weight: 5,071 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS:

• 39 inch NC motorized back gauge system
• 0-180° angular cutting device
• Pneumatic sheet support system
• Blade set as spares

• PNEUMATIC SHEET SUPPORT TO PROCESS REAR DROP OR FRONT DROP
• PNEUMATIC SHEET SUPPORT AS FRONT AND REAR DROP IN THE SAME CYCLE (NC CONTROLLED)
• BACK GAUGE EXTENSION TO 39 INCH
• SIDE GAUGE EXTENSION TO 2 MT
• BLANK SHEET WAGON WITH WHEELS (2204.6 LBS LOADING CAPACITY)
• VARIABLE ANGULAR CUTTING SUPPORT
• CUTTING LINE LASER INDICATOR

The post ERBEND EMS 2525/EMS 2540 8ft NC Motorized Shears appeared first on Sheet Metal Machines.

STANDARD FEATURES:

• 29.5 INCH SERVO MOTORIZED BACK GAUGE SYSTEM
• 700W servo drive and motor with +/- 0,1 mm accuracy
• 32/32 thread ballscrew system with +/- 0,05 mm accuracy
• Aluminum sigma profile sheet support
• One fixed, one movable, full body protective, vertical light barriers
• Side fences to avoid unwanted interventions
• ERCUT NC CONTROL SYSTEM
• HMI – 7 inch TFT display touchscreen with 800×480 resolution
• Ethercat + USB inputs and IP65 protection class
• 128 MB memory for 10.000 programmes with 10 steps
• Manual, semi-automatic and automatic functions
• Parametrical settings for retraction, pneumatic support and backgauge
• Language selection (specific languages can be imported)
• FRICTION FREE GUILLOTINE BLADE GEOMETRY AND DUAL SIDED BLADES
• Thanks to the curvy machined blade geometry, blades never touch each other which sustains a much more longer blade life without sacrificing cutting precision.
• Both sides of the blades can be used by switching easily
• 2525 – 3220 – 4015  series do not have/need blade gap adjustment, all thicknesses can be done with the same fixed adjustment
• 2540 and 3240 series have manual mechanical blade gap adjustment function
• SPRING LOADED HOLD-DOWN BAR AND POLYURETHANE MATERIAL CLAMPING SURFACE
• Thanks to the spring load, the sheet is clamped and fixed with an ideal pressure for cutting
• With the polyurethane touching surface (shown in red below), your material is never scratched
• FIXED SIDE SQUARING GAUGE AND STAINLESS FEEDING TABLE WITH RULERS ON EACH 19.68 INCH LENGTH
• RETRACTABLE FRONT SHEET SUPPORT BAR
• From the cutting line to the edge, it is able to support max 36.6 inch long sheets
• Smooth and light movement only by pulling from the middle
• LED ILLUMINATION OF CUTTING AREA AND CUTTING LINE

SPECIFICATIONS:
MODEL: EMS 2030
Sheet Length: 81 in. (6.75 ft)
Capacity – Steel: 0.118 in.
Capacity – Stainless: 0.059 in.
Capacity – Aluminum: 0.177 in.
Dimensions: 67 x 104 x 51 in.
Weight: 3,748 lbs.

MODEL: EMS 2040
Sheet Length: 81 in. (6.75 ft)
Capacity – Steel: 0.157 in.
Capacity – Stainless: 0.098 in.
Capacity – Aluminum: 0.236 in.
Dimensions: 67 x 118 x 51 in.
Weight: 3,968 lbs.
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS:

• 39 inch NC motorized back gauge system
• 0-180° angular cutting device
• Pneumatic sheet support system
• Blade set as spares

• PNEUMATIC SHEET SUPPORT TO PROCESS REAR DROP OR FRONT DROP
• PNEUMATIC SHEET SUPPORT AS FRONT AND REAR DROP IN THE SAME CYCLE (NC CONTROLLED)
• BACK GAUGE EXTENSION TO 39 INCH
• SIDE GAUGE EXTENSION TO 2 MT
• BLANK SHEET WAGON WITH WHEELS (2204.6 LBS LOADING CAPACITY)
• VARIABLE ANGULAR CUTTING SUPPORT
• CUTTING LINE LASER INDICATOR

The post ERBEND EMS 2030/EMS 2040 6ft NC Motorized Shears appeared first on Sheet Metal Machines.

SPECIFICATIONS:
Capacity
Mild Steel (hot roll) 60K PSI: 10 ga.
Stainless Steel 85 K PSI: 14 ga.
Soft aluminum 28K PSI: 1/4 in.
Hemming max thickness: 22 ga.

Bending length capacity: 10 ft.
Bend Angel Degree, programmable: 135 degree
Max. Box Depth: 153mm = 6.02 in.
Large Beam Opening/Clamping Opening: 3 in.
Beam front/back adjustment: 1 in.
Min. Reverse Bend: 1 in.
Max. Table Back Gauge Distance: 48-3/8 in.
Min. Table Back Gauge Distance: 1/4 in.
Back Gauge Repeatability: 0.0039″
Back Gauge Table Height: 35-3/4 in.
Assorted fingers: 3, 4, 5. 6 in.
Main Motor: 10HP, 220V/208V, 3ph (35amps)
Servo Motor for back gauge: 1 HP
Hydraulic Oil Tank Capacity: 32 Gal.
Recommended hydraulic oil: Shell #68 or equivalent
Machine Weight: 11,550 lbs.
Shipping Weight: 11,850 lbs.
Machine Dimensions: 175 x 93 x 76 in.
Shipping Dimensions: 163 x 85 x 78 in.

OPTIONAL ITEMS:

• One piece 10 ft straight finger -Call for pricing
• One day on-site training – Call for pricing

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post GMC 10 ft. x 10 ga. Hydraulic Box and Pan Brake w/NC Controller | HBB-1010NC appeared first on Sheet Metal Machines.

• 7.5 hp motor produces up to 78 tons of pressure.
• 13.78” stroke length.
• Runs on 220-volt 3-phase power.
• Industrial-grade hydraulic system is located on top of the machine to reduce flex.
• You can adjust the pressure of the the hydraulics for your material.
• Designed for simple operation. In 15 minutes, anyone could learn to run it.
• Numerical control (NC) programmer can store up to 99 programs with 10 bends per program.
• Electronic encoders make this hydraulic press brake accurate to +/- .002”.
• Product counter makes production runs more efficient.
• Control the bending stroke with 2 buttons or with the foot pedal, so your hands are free to guide the material.
• You can also run the machine in a manual mode for one-off projects as well as set-up.
• Robust manual back gauge bolts to the machine and helps with repeatability.
• Machined table, 37.4” high, keeps your material perfectly level. No need to hold one side and hope it’s lined up!
• Quick-release tooling system makes changes fast and simple. Just turn the handle and the post will lift. The V die slides in and out.
• Accepts attachments for punching, straightening, shearing, and even pipe bending.
• Includes a set of single-V tooling (V-opening die and V post).
• Many additional tooling sets are available. We can find the right one for your project or create a custom set, if necessary.
• 4,580-pound steel frame, made from 4 powerful pieces of inch-thick flat bar, will keep results accurate for many years and won’t flinch under pressure.
• Shelving in the front can hold tooling and items you might need on a daily basis.
• We stock replacement parts, so we can ship them to you quickly.
• Covered by a 1-year parts warranty.

SPECIFICATIONS:
Pressure: 78 Tons
Stroke Length: 13.78″
Stroke Accuracy: +/- .002″
Approach Speed: 1.69″/Sec
Working Speed: .43″/Sec
Return Speed: .55″/Sec
Fixture Holes: 1 @ 4.646″ Dia 3 @ 3.268″ Dia
Punch Height: 11.81″
Max Bending Capacity (single vee die): 11.81″ (.472″)
Table Height: 37.4″
Motor: 7.5 HP
Power Requirement: 220V/3 Phase
Shipping Dimensions (L/W/H): 81″/38″/61″
Shipping Weight: 4,580 lbs

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post BAILEIGH HPB-78NC 78 Ton Horizontal Press Brake appeared first on Sheet Metal Machines.

Powerful, Easy-to-Use Hydraulic System

• Runs in 3 modes: jog mode for setup, manual mode for more control over descent and return, and automatic mode for full production.
• 2 encoder-controlled hydraulic cylinders move the top beam.
• Digital readout (DRO) displays the position of the downward stroke, so you can fine-tune a bend and make it right every time.
• It takes a just few seconds to change the top beam pressure and the top position of the stroke (for more or less travel).
• You can set a timer for bend delay to hold the beam down at the bottom of the stroke, so the bend won’t lose its shape.
• 2 hand wheels let you adjust the position of the beam and back gauge for consistency across the entire width of the beam.
• Foot pedal brings the stroke up and down, leaving your hands free to position the material.
• Motorized back gauge rides on a solid ball screw trolley mechanism.
• Back gauge encoder shows its position on its own DRO.
• Parallel mechanism on the beam synchronizes the top and bottom die to deliver better quality bends across the entire width of the machine.

Rigid Structure and Low Maintenance

• Heavy electro-welded frame, made of solid steel, enables this press brake to stay accurate and run smoothly in production for many years.
• Massive 7,700-pound construction supports the hydraulic pressure, so the machine stands firm at full capacity.
• Upper beam rides on a hardened, stabilizing track, coupled together by 3 axes of bearings, to ensure high accuracy between both dies at any position of the stroke.
• Includes a set of hardened single-Vee American tooling.
• Accepts standard press brake tooling, giving you a wide variety of options.
• Comes with front material rests (or support arms), which some competing machines do not include.
• 6-light safety curtain helps protect you from injury. This guard stops the machine from running if your hand passes through the light beam.
• 4 grease zerks let you add oil every few months.
• Large hydraulic reservoir on the back allows for convenient fluid changes every 6 to 8 months.

Fast Shipping and Lifetime Service

• Typically in stock and usually ships in 72 hours.
• Most replacement parts are in stock at our Wisconsin headquarters, so we can get them to you without delay.
• Comes covered by a 1-year parts warranty.
• We provide lifetime technical support by phone. All of our reps have hands-on machine experience. Call us whenever you need help and advice on a project.

Recommended for: Industrial shops, maintenance shops, and R&D shops.

SPECIFICATIONS:
Maximum Pressure: 67 Tons
Bending Capacity Max Length / Max Thickness: 78.75” / .157″
Bending Thickness: Call for details
Distance Between Housings: 61”
Distance From Table to Ram: 11.81”
Table Width: 6.29”
Throat Depth (to housing): 7.87”
Stroke Distance: 5.9″
Approach Speed: 3.14” / sec.
Bending Speed: .275” / sec.
Return Speed: 2.36” / sec.
Power Back Gauge Length: 23.62”
Main Motor: 7.5 hp
Back Gauge Motor: 1/2 hp
Voltage: 220 volt / 3 phase
Oil Capacity: 35 gal
Dimensions (L/W/H): 90.55” / 61.02” / 94.48”
Weight: 7,700 lbs

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post BAILEIGH BP-6778NC 67 Ton x 6.5 ft Hydraulic Press Brake appeared first on Sheet Metal Machines.

• Produces up to 33 tons of pressure.
• Bends sheet metal up to 61” wide.
• Maximum capacity of .078” thick sheet metal across the machine’s full width.
• 3 hp main motor requires 220-volt 3-phase power.

Powerful, Easy-to-Use Hydraulic System

• Runs in 3 modes: jog mode for setup, manual mode for more control over descent and return, and automatic mode for full production.
• 2 encoder-controlled hydraulic cylinders move the top beam.
• Digital readout (DRO) displays the position of the downward stroke, so you can fine-tune a bend and make it right every time.
• It takes a just few seconds to change the top beam pressure and the top position of the stroke (for more or less travel).
• You can set a timer for bend delay to hold the beam down at the bottom of the stroke, so the bend keeps its shape.
• 2 hand wheels let you adjust the position of the beam and back gauge for consistency across the entire width of the beam.
• Foot pedal brings the stroke up and down, leaving your hands free to position the material.
• Motorized back gauge rides on a solid ball screw trolley mechanism.
• Back gauge encoder shows its position on its own DRO.
• Parallel mechanism on the beam synchronizes the top and bottom die to deliver better quality bends across the entire width of the machine.

Rigid Structure and Low Maintenance

• Heavy electro-welded frame, made of solid plate steel, keeps this press brake accurate and running smoothly in production for many years.
• Rugged 3,300-pound construction supports the hydraulic pressure, so the machine stays strong at full capacity.
• Upper beam rides on a hardened, stabilizing track, coupled together by 3 axes of bearings, to ensure high accuracy between both dies at any position of the stroke.
• Includes a set of hardened single-Vee American tooling.
• Accepts standard press brake tooling, giving you a wide variety of options.
• Comes with front material rests (or support arms), which some competing machines do not include.
• 6-light safety curtain helps protect you from injury. This guard stops the machine from running if your hand passes through the light beam.
• 4 grease zerks let you add oil every few months.
• Large hydraulic reservoir on the back allows for convenient fluid changes every 6 to 8 months.

Fast Shipping and Lifetime Service

• Typically in stock and usually ships in 72 hours.
• Most replacement parts are in stock at our Wisconsin headquarters, so we can get them to you without delay.
• Comes covered by a 1-year parts warranty.
• We provide lifetime technical support by phone. All of our reps have hands-on machine experience. Call us whenever you need help and advice on a project.

Recommended for: Small industrial shops, maintenance and R&D shops, and potentially larger industrial shops, if they need to make a specific part that fits this press brake’s width.

SPECIFICATIONS:
Maximum Pressure: 33 Tons
Bending Length: 61”
Bending Thickness: Call for details
Distance Between Housings: 49.21”
Distance From Table to Ram: 9.84”
Throat Depth (to housing): 7.87”
Stroke Distance: 5.9″
Approach Speed: 3.14” / sec.
Bending Speed: .275” / sec.
Return Speed: 2.36” / sec.
Power Back Gauge Length: 23.62”
Main Motor: 3 hp
Back Gauge Motor: 1/2 hp
Voltage: 220 volt / 3 phase
Oil Capacity: 24 gal
Shipping Dimensions (L/W/H): 67” / 47.5” / 80.75”
Weight: 3,300 lbs

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post BAILEIGH BP-3360NC 33 Ton x 5 ft Press Brake appeared first on Sheet Metal Machines.

• 5 hp motor produces up to 45 tons of pressure.
• 9.84” stroke length.
• Runs on 220-volt 3-phase power.
• Industrial-grade hydraulic system is located on top of the machine to reduce flex.
• You can adjust the pressure of the the hydraulics for your material.
• Designed for simple operation. In 15 minutes, anyone could learn to run it.
• Numerical control (NC) programmer can store up to 99 programs with 10 bends per program.
• Electronic encoders make this hydraulic press brake accurate to +/- .002”.
• Product counter makes production runs more efficient.
• Control the bending stroke with 2 buttons or with the foot pedal, so your hands are free to guide the material.
• You can also run the machine in a manual mode for one-off projects as well as set-up.
• Robust manual back gauge bolts to the machine and helps with repeatability.
• Machined table, 36” high, keeps your material perfectly level. No need to hold one side and hope it’s lined up!
• Quick-release tooling system makes changes fast and simple. Just turn the handle and the post will lift. The V die slides in and out.
• Accepts attachments for punching, straightening, shearing, and even pipe bending.
• Includes 80mm single-V tooling (V-opening die and V post).
• Many additional tooling sets are available. We can find the right one for your project or create a custom set, if necessary.
• 2,266-pound steel frame, made from 4 powerful pieces of inch-thick flat bar, will keep results accurate for many years and won’t flinch under pressure.
• Shelving in the front can hold tooling and items you might need on a daily basis.
• We stock replacement parts, so we can ship them to you quickly.
• Covered by a 1-year parts warranty.

SPECIFICATIONS:
Pressure: 45 Tons
Stroke Length: 9.84″
Stroke Accuracy: +/- .002″
Approach Speed: 1.5″/Sec
Working Speed: .51″/Sec
Return Speed: .78″/Sec
Fixture Holes: 1 @ 3.268″ Dia 3 @ 2.283″ Dia
Punch Height: 7.875″
Max Bending Capacity: 7.875″ (.472″)
Table Height: 36.61″
Motor: 5HP
Power Requirement: 220V/3 Phase
Shipping Dimensions (L/W/H): 64″/26″/47″
Shipping Weight: 2,266 lbs

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post BAILEIGH HPB-45NC 45 Ton Horizontal Press Brake appeared first on Sheet Metal Machines.

• Produces up to 33 tons of pressure.
• Bends sheet metal up to 50” wide.
• Maximum capacity of .098” thick sheet metal across the machine’s full width.
• Requires 220-volt 3-phase power.

Powerful, Easy-to-Learn Hydraulic System

• Runs in 3 modes: jog mode for setup, manual mode for more control over descent and return, and automatic mode for full production.
• 2 encoder-controlled hydraulic cylinders move the top beam.
• Digital readout (DRO) displays the position of the downward stroke, so you can fine-tune a bend and make it right every time.
• It takes a just few seconds to change the top beam pressure and the top position of the stroke (for more or less travel).
• You can set a timer for bend delay to hold the beam down at the bottom of the stroke, so the bend keeps its shape.
• 2 hand wheels let you adjust the position of the beam and back gauge for consistency across the entire width of the beam.
• Foot pedal brings the stroke up and down, leaving your hands free to position the material.
• Motorized back gauge rides on a solid ball screw trolley mechanism.
• Back gauge encoder shows its position on its own DRO.
• Parallel mechanism on the beam synchronizes the top and bottom die to deliver better quality bends across the entire width of the machine.
• You can train your staff to use this press brake in 5 minutes.

Rigid Structure and Low Maintenance

• Heavy electro-welded frame, made of solid plate steel, keeps this press brake accurate and running smoothly in production for many years.
• Robust 2,640-pound construction supports the hydraulic pressure, so the machine won’t buckle at full capacity.
• Upper beam rides on a hardened, stabilizing track, coupled together by 3 axes of bearings, to ensure high accuracy between both dies at any position of the stroke.
• Includes a set of hardened single-Vee American tooling.
• Accepts standard press brake tooling, giving you a wide variety of options.
• Comes with front material rests (or support arms), which some competing machines do not include.
• 6-light safety curtain helps protect you from injury. This guard stops the machine from running if your hand passes through the light beam.
• 4 grease zerks let you add oil every few months.
• Large hydraulic reservoir on the back allows for convenient fluid changes every 6 to 8 months.

Fast Shipping and Lifetime Service

• Typically in stock and usually ships in 72 hours.
• Most replacement parts are in stock at our Wisconsin headquarters, so we can get them to you without delay.
• Comes covered by a 1-year parts warranty.
• We provide lifetime technical support by phone. All of our reps have hands-on machine experience. Call us whenever you need help and advice on a project.

Recommended for: Small industrial shops, maintenance and R&D shops, and potentially larger industrial shops, if they need to make a specific part that fits this press brake’s width.

SPECIFICATIONS:
Maximum Pressure: 33 Tons
Bending Length: 50”
Bending Thickness: Call for details
Distance Between Housings: 38.18”
Distance From Table to Ram: 9.84”
Throat Depth (to housing): 7.87”
Stroke Distance: 5.9″
Approach Speed: 3.14” / sec.
Bending Speed: .275” / sec.
Return Speed: 2.36” / sec.
Power Back Gauge Length: 23.62”
Main Motor: 3 hp
Back Gauge Motor: 1/2 hp
Voltage: 220 volt / 3 phase
Oil Capacity: 20 gal
Dimensions (L/W/H): 55.5” / 47.5” / 80.75”
Weight: 2,640 lbs

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post BAILEIGH BP-3350NC 33 Ton x 4 ft Press Brake appeared first on Sheet Metal Machines.