Cycle Time

• • At 83 cycles per minute, the new PLC reaches coil line speeds.*

Continuous Fire

• • Depressing the ergonomic foot pedal while the Continuous Fire switch is on allows the operator to continuously weld pins without having to lift their foot off the pedal.

Single Weld Control

• • Simply set the machine for the gauge you want based on pin size and thickness of sheet metal. Weld and dwell time are calculated by the PLC.

High Output Transformer

• • Produces the strongest possible weld for 1/2″ all the way to full 2″ pins, fastened to 16-26 gauge sheet metal.
• * Numbers based on Weld Setting 1

PowerPoint Weld Pins:

• • For peak performance, it is highly recommended using Gripnail’s wide range of PowerPoint Weld Pins. Each point is precisely formed to provide optimum electrical resistance.
  • A PowerPoint Weld Pin permanently attaches insulation to galvanized steel in the fabrication of HVAC duct work and withstands a tensile pull of at least 120 pounds in sheet metal.

Programmable Logic Controller:

• • Inside the control box is a PLC, which has been programmed here in the USA, to coordinate welding and machine functions resulting in the fastest and most perfected weld every time. Machine operators only need to increase the weld setting for longer pins or thicker sheet metal, and the PLC will set the dwell time and coordinate the feed cycle. Minimal operator training is needed for this machine which means maximum flexibility.
• The PLC allows for minimum operator intervention during setup or job changes, all while producing maximum performance at industry leading speeds.

Chamfered & Recessed Weld Tip:

• • The magnetic upper weld tip is specially designed with a chamfered edge and recessed center to optimize the weld quality of PowerPoint weld pins. The unique characteristics of the PowerPoint weld pin’s noninvasive protruding shank captures and centers the weld pin to ensure consistent loading while the beveled retaining cap prevents it from shifting off the weld tip when the pin is being set though the insulation. Although the PowerPinner 7005HS works with a variety of weld pins, using our PowerPoint’s precision manufacturing process assures a trouble free operation with the best quality weld possible.

Quick Change Weld Tips:

• • Upper and lower weld tips cna be replaced in seconds. The lower weld tip is purposefully off centered so that once an area is worn down, the operator can make a small rotational adjustment and use a new part of the weld tip for extended product life.

Double-Acting Load Cylinder:

• • To keep up with the intense speeds of the PLC, double-acting load cylinders are standard on every machine. This ensures that each Weld Pin is loaded at maximum speeds without the danger of a component collision potentially possible with single-acting cylinders, which may lag due to its dependence on spring tension.

Simplified Controls

• • A single weld-setting switch controls the weld time while the PLC optimizes the dwell times. The other controls are a “continuous fire” on/off switch and a feeder bowl speed control. The PowerPinner 7005HS also comes with a LED voltage readout which informs the operator of a low voltage situation which can affect the integrity of the weld.
  • Safety – A high visibility power switch comes standard with a simple to use Lockout/Tackout feature.

NEMA Type 12 Electrical Enclosures

• • To protect vital components form the rigor of most manufacturing environments, every electrical enclosure is rated to the National Electrical Manufacturers Association’s Type 12 standards. This protects your investment from dust, debris, adhesives remnants and oil vapor form reaching operation critical components.

Large Capacity Feeder Bowl

• • The large capacity feeder bowl can accommodate a full range of pins from half inch to 2 inch and operators cna control the pin feed speed on the control box.

SPECIFICATIONS:
Input Voltage: 190-240 VAC 60Hz, 1-Phase, 35 Amp
Air Requirements: 2-3 CFM, 80 PSI
Working Depth: 63 in.
Anvil Height: 36 in.
Total Depth: 68 in.
Width: 32 in.
List Weight: 523 lbs.
Shipping Weight: 609 lbs.
Freight Class: 70

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post GRIP NAIL PowerPinner 7005HS High Speed Fixed Head Duct Lining Welder appeared first on Sheet Metal Machines.

STANDARD EQUIPMENT:

• 6″ 3-Jaw Chuck
• 8″ 4-Jaw Chuck
• Halogen Light
• Steady/Follow Rest
• Coolant System
• Chuck Guard
• Full Length Splash Guard
• 4 Way Tool Holder
• Micro Bed Stop

SPECIFICATIONS:
MODEL: 1340BV
Swing Over Bed: 13″
Swing Over Cross Slide: 8-1/4″
Distance Between Centers: 40″
Swing In Gap: 18-1/2″
Spindle Bore: 1-9/16″
Spindle Nose: D1-4
Spindle RPM: 40-2000 (Variable Speeds)
Main Motor: 3 HP
Voltage: 230V AC/1PH or 3PH (specify)
Amps: 230v, 8 Amps; 460v, 4 Amps
Weight: 1,320 lbs. net / 1,600 lbs.gross
Dimensions: 72″ x 29″ x 47″

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS:

• Face Plate: $250.00
• Taper Attachment: $1,200.00
• Taper Attachment Installation: $350.00
• Lever Type 5C Collet Closer JFK: $P.O.R.
• Import Collet Closer (Taiwan): $1,200.00
• Newall Digital Read-Out 8″ x 40″ DP700: $2,750.00
• Newall Digital Read-Out 8″ x 40″ NMS300: $1,500.00
• Acu-Rite Digital Read-Out 8″ x 40″ 203: $2,550.00
• Acu-Rite Digital Read-Out 8″ x 40″ 303: $3,000.00
• Fagor or Sony or Mitutoyo Digital Read-Out: P.O.R.
• D.R.O. Installation: $250.00
• Import Quick Change Tool Holder: $375.00
• Aloris Tool Post Set (BXA) 5pc: $P.O.R.
• Live Center MT 3: $100.00
• EVS 460V – Add $375.00

The post ACRA 1340BV 13×40 in. Precision High Speed Engine Lathe appeared first on Sheet Metal Machines.

STANDARD EQUIPMENT:

• 10″ 3-Jaw Chuck
• 12″ 4-Jaw Chuck
• Coolant System
• Halogen Light
• Full Length Splash Guard
• Steady Rest/Follow Rest
• 4 Way Tool Holder

STANDARD EQUIPMENT: 21″ LATHE

• 12″ 3-Jaw Chuck
• 16″ 4-Jaw Chuck
• Coolant System
• Halogen Light
• Full Length Splash Guard
• Steady Rest/Follow Rest
• 4 Way Tool Holder
• 2 Speed Tail Stock

OPTIONAL MODELS:
1740TE-2 17″x40″ Precision High Speed Engine Lathe: $20,500.00
1760TE-2 17″x60″ Precision High Speed Engine Lathe: $23,000.00

SPECIFICATIONS:

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS:

• 6” Steady Rest…………………………………….. $ 750.00
• 9” Steady Rest……………………………………. $ 1,000.00
• Face Plate……………………………………….. $ 500.00
• Micro Bed Stop…………………………………. $ 350.00
• Taper Attachment………………………………. $ 2,000.00
• Taper Attachment Installation………………. $ 425.00
• Lever Type 5C Collet Closer JFK D1-6…………………. $ P.O.R.
• Import Collet Closer (Taiwan)………………………………. $ 1,300.00
• Newall Digital Read-Out-10″ X 40″ DP700…………….. $ 2,700.00
• Newall Digital Read-Out-10″ X 40 NMS300…..……… $ 1,500.00
• Newall Digital Read-Out-10″ X 60″ DP700…………… $ 3,250.00
• Newall Digital Read-Out-10″ X 60″ NMS300…………. $ 1,650.00
• Newall Digital Read-Out-10″ X 86″ DP700………………$ 4,000.00
• Newall Digital Read-Out- 10″ X 86″ NMS300 ………….. $1,900.00
• Acu-Rite Digital Read-Out-10″ X 40″ 203………………. $ 2,850.00
• Acu-Rite Digital Read-Out-10″ X 60″ 203……………… $ 3,350.00
• Acu-Rite Digital Read-Out-10” X 86 203 ……………….$4,000.00
• Acu-Rite Digital Read-Out-10″ X 40″ 303……………… $ 3,350.00
• Acu-Rite Digital Read-Out-10″ X 60″ 303……………… $ 3,800.00
• Sony or Fagor or Mitutoyo Digital Read-Out…………. $ P.O.R.
• D.R.O. Installation…………………………………………….. $ 250.00
• Aloris Tool Post Set (CXA) 5 pc………………………….. $ P.O.R.
• Import Quick Change Tool Holder………………………… $ 500.00
• Live Center MT 4……………………………………………… $ 125.00
• TVS 460V……………………………………………………….. $ 500.00

The post ACRA TE-2 17/21 in. Precision High Speed Engine Lathe w/2.5 in. Bore – Options Available appeared first on Sheet Metal Machines.

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

WARRANTY: 1 YEAR – Parts

• Our engine lathe is suitable for machining in metalworking machine shops, tool rooms, and repair shops. Ideal for making threads and turning metal parts like, shafts, spindles, sleeves, discs, weapon components, and many more parts. Our lathes are robust, reliable, easy to use, convenient to repair, precise, quiet, and have no vibration.
• ISO 9001 certified
• With free SINO DRO installed
• With free Taper Attachment installed
• Full Geared-head precision Engine Lathe with foot brake
• Quick-change gearbox with fast and easy threading set up
• Heavy Duty main motor 3HP, 220V, 1 phase
• Spindle bore 1 1/2”
• Heavy Duty spindle D1-4
• Heavy Duty guideway width 7 1/2”
• 8 spindle speeds from 70-2,000 rpm, speeds:
  70/115/190/300/460/755/1255/2000 rpm
• 56 kinds of inch threads, and 44 kinds of metric threads
• Spindle is balanced, hardened and precision ground
• All gears and shafts are hardened and precision ground
• Guideways induction hardened and precision ground
• Automatic lubrication system in headstock and feed box
• 1 year parts warranty for this model
• DISCLAIMER: Please note this machine is incompatible with the use of a rotary phase converter. Any attempt to purchase, install, or employ one, whether carried out by you or a professional service company, will automatically void the warranty. It is crucial to understand that any such actions are entirely the responsibility of the buyer.
• This disclaimer is intended to clearly convey that the utilization of a rotary phase converter to power or operate this machine is not supported.

EQUIPPED WITH:

• Free SINO DRO installed
• Free Taper Attachment installed
• 6” 3-jaw chuck with set reversible jaws
• 8” 4-jaw chuck with set reversible jaws
• 10” Face plate
• 3-3/4” large steady rest
• 2” follow rest
• Foot brake
• Coolant system
• Halogen work light
• 4-way tools post
• Full length splash guard
• (2) dead centers and (1) reducing sleeve
• Thread chasing dial
• Tool box

OPTIONAL ITEMS:

The post GMC GML-1440BGF-1 14 x 40 in. High Speed Geared Head Precision Toolroom Metal Lathe | Single Phase appeared first on Sheet Metal Machines.

BED:

• One-piece casting base.
• Meehanite casting, vibration stress relieved.
• Induction hardened and precision ground bed ways, precision hand scraped removable gap.
• Foot brake.
• Turcite B coating between bed and carriage.

GEARBOX:

• Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears.

HEADSTOCK:

• Housing is vibration-absorbent, deflection-free.
• Gears are hardened & MMG or REISHAUER ground.

HEAVY DUTY SPINDLE:

• Machined from forged alloy steel, hardened ground & dynamically balanced.
• Three point support by high grade precision, machine tool taper roller & ball bearings.

APRON:

• RIH or LJH wheel can be available on request.
• Integrated automatic control for longitudinal & cross feeds, forward & reverse feeds.

CARRIAGE AND SLIDE:

• Anti-Float design backlash eliminator fitted in cross slide nut.
• Safety clutch at feed shaft.
• One shot lubrication in carriage & top slide.
• Dual dials supply inch system screw.
• Metric dial supply metric system only.

SAFETY FEATURES:

• Nylon safety gears in end train.
• Shear pin in leadscrew.

OPTIONAL MODELS:
1740TE-3 17″x40″ Precision High Speed Engine Lathe: $23,000.00
1760TE-3 17″x60″ Precision High Speed Engine Lathe: $26,000.00
2140TE-3 21″x40″ Precision High Speed Engine Lathe: $25,000.00
2160TE-3 21″x60″ Precision High Speed Engine Lathe: $28,000.00
2190TE-3 21″x90″ Precision High Speed Engine Lathe: $30,000.00

STANDARD EQUIPMENT: 17″ LATHE

• 10″ 3-Jaw Chuck
• 12″ 4-Jaw Chuck
• Steady Rest w/Ball Bearing
• Follow Rest w/Bronze Tip
• Chuck Guard
• Halogen Light
• Full Length Splash Guard
• Dead Center MT.5 made of carbon steel
• Dead Center MT.4 with carbide tip
• Spindle center sleeve Ø85mm Taper 1/19.18 x MT.5
• Level pads 6pcs
• Tool set and box
• Operation manual and parts list

STANDARD EQUIPMENT: 21″ LATHE

• 12″ 3-Jaw Chuck
• 16″ 4-Jaw Chuck
• Steady Rest w/Ball Bearing
• Follow Rest w/Bronze Tip
• Chuck Guard
• Halogen Light
• Full Length Splash Guard
• Dead Center MT.5 made of carbon steel
• Dead Center MT.4 with carbide tip
• Spindle center sleeve Ø85mm Taper 1/19.18 x MT.5
• Level pads 6pcs
• Tool set and box
• Operation manual and parts list

SPECIFICATIONS:

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS:

• 6” Steady Rest for 17″………………. $ 750.00
• 9” Steady Rest for 17″……………… $ 1,000.00
• 6” Steady Rest for 21″………………. $ 1,100.00
• 9” Steady Rest for 21″………………. $ 1,750.00
• Face Plate…………………………… $ 600.00
• Micro Bed Stop…………………….. $ 350.00
• Taper Attachment………………….. $ 2,000.00
• Taper Attachment Installation…………………….. $ 425.00
• Lever Type 5C Collet Closer JFK D1-8……… $ P.O.R.
• Import Collet Closer (Taiwan)…………………….. $ 1,450.00
• Newall Digital Read-Out-10″ X 40″ DP700……………….. $ 2,700.00
• Newall Digital Read-Out-10″ X 40 NMS300…………….. $ 1,500.00
• Newall Digital Read-Out-10″ X 60″ DP700…………..… $ 3,250.00
• Newall Digital Read-Out-10″ X 60″ NMS300……..……. $ 1,650.00
• Newall Digital Read-Out-10″ X86″ DP700……………… $ 4,000.00
• Newall Digital Read-Out-10″ X86″ NMS300…..………. $ 1,900.00
• Acu-Rite Digital Read-Out-10″ X 40″ 203……………….. $ 2,850.00
• Acu-Rite Digital Read-Out-10″ X 60″ 203……………….. $ 3,350.00
• Acu-Rite Digital Read-Out-10″ X 86″ 203……………….. $ 4,000.00
• Acu-Rite Digital Read-Out-10″ X 40″ 303……………….. $ 3,350.00
• Acu-Rite Digital Read-Out-10″ X 60″ 303……………….. $ 3,800.00
• Acu-Rite Digital Read-Out-10″ X 86″ 303……………….. $ 4,500.00
• Sony or Fagor or Mitutoyo Digital Read-Out…………… $ P.O.R.
• D.R.O. Installation………………………………………………. $ 250.00
• Aloris Tool Post Set (CXA) 5 pc……………………………. $ P.O.R.
• Import Quick Change Tool Holder………………………….. $ 500.00
• Live Center MT 4……………………………………………. $ 125.00
• TVS 460V……………………………………………………… $ 500.00

The post ACRA TE-3 17/21 in. Precision High Speed Engine Lathe w/3-1/8 in. Large Bore – Options Available appeared first on Sheet Metal Machines.

SPECIFICATIONS:

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post KALAMAZOO KM14HS 14 in. High Speed Non-Ferrous Mitre Saw appeared first on Sheet Metal Machines.

K10HS SAW WILL CUT:

• • The K10HS Kalamazoo Industries high speed saw will cut (with the correct carbide blade) non-ferrous materials like aluminum, plastic, and brass.

SPECIFICATIONS:
Blade: 10 in.
Capacity: 3.25 in. solid/pipe
Motor: 3HP, 3PH (220v or 440v) and/or 3HP, 1PH (110v or 220v) motor (SPECIFY PHASE AND VOLTAGE)
RPM at the spindle: 3450
Spindle Arbor: 5/8 in.
Blade type: high-speed carbide blade (not included)
Dimensions: L 30 x W 36 x H 30 in.
Weight: 200 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS:
12-0 steel stand – $250.00

The post KALAMAZOO K10HS 10 in. High Speed Non-Ferrous Saw appeared first on Sheet Metal Machines.