Description
- Made in Taiwan – High Quality!
BED:
- One-piece casting base.
- Meehanite casting, vibration stress relieved.
- Induction hardened and precision ground bed ways, precision hand scraped removable gap.
- Foot brake.
- Turcite B coating between bed and carriage.
GEARBOX:
- Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears.
HEADSTOCK:
- Housing is vibration-absorbent, deflection-free.
- Gears are hardened & MMG or REISHAUER ground.
HEAVY DUTY SPINDLE:
- Machined from forged alloy steel, hardened ground & dynamically balanced.
- Three point support by high grade precision, machine tool taper roller & ball bearings.
APRON:
- RIH or LJH wheel can be available on request.
- Integrated automatic control for longitudinal & cross feeds, forward & reverse feeds.
CARRIAGE AND SLIDE:
- Anti-Float design backlash eliminator fitted in cross slide nut.
- Safety clutch at feed shaft.
- One shot lubrication in carriage & top slide.
- Dual dials supply inch system screw.
- Metric dial supply metric system only.
SAFETY FEATURES:
- Nylon safety gears in end train.
- Shear pin in leadscrew.
OPTIONAL MODELS:
1740TE-3 17″x40″ Precision High Speed Engine Lathe: $23,000.00
1760TE-3 17″x60″ Precision High Speed Engine Lathe: $26,000.00
2140TE-3 21″x40″ Precision High Speed Engine Lathe: $25,000.00
2160TE-3 21″x60″ Precision High Speed Engine Lathe: $28,000.00
2190TE-3 21″x90″ Precision High Speed Engine Lathe: $30,000.00
STANDARD EQUIPMENT: 17″ LATHE
- 10″ 3-Jaw Chuck
- 12″ 4-Jaw Chuck
- Steady Rest w/Ball Bearing
- Follow Rest w/Bronze Tip
- Chuck Guard
- Halogen Light
- Full Length Splash Guard
- Dead Center MT.5 made of carbon steel
- Dead Center MT.4 with carbide tip
- Spindle center sleeve Ø85mm Taper 1/19.18 x MT.5
- Level pads 6pcs
- Tool set and box
- Operation manual and parts list
STANDARD EQUIPMENT: 21″ LATHE
- 12″ 3-Jaw Chuck
- 16″ 4-Jaw Chuck
- Steady Rest w/Ball Bearing
- Follow Rest w/Bronze Tip
- Chuck Guard
- Halogen Light
- Full Length Splash Guard
- Dead Center MT.5 made of carbon steel
- Dead Center MT.4 with carbide tip
- Spindle center sleeve Ø85mm Taper 1/19.18 x MT.5
- Level pads 6pcs
- Tool set and box
- Operation manual and parts list
SPECIFICATIONS:
|
MODEL
|
1740TE-3
1760TE-3 1790TE-3 |
2140TE-3
2160TE-3 2190TE-3 |
||
|
CAPACITY
|
Height of Centers:
|
216mm (8.5″)
|
271mm (10.67″)
|
|
|
Swing Over Bed:
|
Ø432mm (17″)
|
Ø542mm (21.34″)
|
||
|
Swing In Gap:
|
Ø622mm (24.48″)
|
Ø730mm (28.74″)
|
||
|
Swing Over Cross Slide:
|
Ø277mm (10.9″)
|
Ø387mm (15.23″)
|
||
|
Distance Between Centers
|
1000mm (40″)
1500mm (60″) 2200mm (86.6″) |
|||
|
Width of Bed
|
320mm (12.5″)
|
|||
|
HEADSTOCK
|
Spindle Nose Type:
|
D1-8
|
||
|
Spindle Center Sleeve:
|
Ø85mm Taper 1/19.18 x MT No.5
|
|||
|
Spindle Bore
|
Ø80mm (3.149″)
|
|||
|
Spindle Speeds –
Gear Steps/Range |
A: 26 | 40 | 60 | 90
|
|||
|
B: 105 | 145 | 205 | 305
|
||||
|
C: 510 | 715 | 1000 | 1500
|
||||
|
CARRIAGE
|
Cross Slide Travel:
|
250mm (9.84″)
|
300mm (11.81″)
|
|
|
Top Slide Travel
|
150mm (5.9″)
|
|||
|
THREAD & FEEDS
|
Whitworth threads: Kinds / Range
|
45 Kinds / 2 ~ 72 T.P.I
|
||
|
Metric threads: Kinds / Range
|
39 Kinds / 0.2 ~ 14mm
|
|||
|
D.P. threads: Kinds / Range
|
21 Kinds / 8 ~ 44 D.P.
|
|||
|
M.P. threads: Kinds / Range
|
18 Kinds / 0.3 ~ 3.5 M.P.
|
|||
|
Longitudinal feeds
|
0.04 ~ 1.0mm (0.0015″ ~ 0.04″)
|
|||
|
Cross feeds
|
0.02 ~ 0.5mm (0.00075″ ~ 0.02″)
|
|||
|
TAILSTOCK
|
Quill Diameter:
|
Ø59mm (2.322″)(40,60),
Ø68mm (2.677″)(80) |
||
|
Quill Travel:
|
127mm (5″)(40,60), 153mm (6″)(80)
|
|||
|
Taper Center
|
MT. No.4
|
|||
|
MOTOR
|
Main Spindle
|
17″ std. 10 HP | 21″ std. 12.5 HP
|
||
|
Voltage
|
230/460V AC ~ 3 PH
|
|||
|
Forced Lubrication for HD.
|
—
|
|||
|
Coolant Pump
|
1/8 HP
|
|||
|
MEASUREMENT
|
Weight approx.
|
Net
|
3,858 lbs. (1750kgs) |
4,035 lbs. (1830kgs)
4,321 lbs. (1960kgs) 5,291 lbs. (2400kgs) |
|
Gross
|
4,453 lbs. (2020kgs)
4,806 lbs. (2180kgs) 5,776 lbs. (2620kgs) |
4,696 lbs. (2130kgs)
4,983 lbs. (2260kgs) 5,953 lbs. (2700kgs) |
||
|
Packing sizes
|
Length
|
94.5″ (2400mm)
|
||
|
Width x Height
|
45.5″ (1155mm) x 72.8″ (1850mm)
|
|||
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
OPTIONAL ITEMS:
- 6” Steady Rest for 17″………………. $ 750.00
- 9” Steady Rest for 17″……………… $ 1,000.00
- 6” Steady Rest for 21″………………. $ 1,100.00
- 9” Steady Rest for 21″………………. $ 1,750.00
- Face Plate…………………………… $ 600.00
- Micro Bed Stop…………………….. $ 350.00
- Taper Attachment………………….. $ 2,000.00
- Taper Attachment Installation…………………….. $ 425.00
- Lever Type 5C Collet Closer JFK D1-8……… $ P.O.R.
- Import Collet Closer (Taiwan)…………………….. $ 1,450.00
- Newall Digital Read-Out-10″ X 40″ DP700……………….. $ 2,700.00
- Newall Digital Read-Out-10″ X 40 NMS300…………….. $ 1,500.00
- Newall Digital Read-Out-10″ X 60″ DP700…………..… $ 3,250.00
- Newall Digital Read-Out-10″ X 60″ NMS300……..……. $ 1,650.00
- Newall Digital Read-Out-10″ X86″ DP700……………… $ 4,000.00
- Newall Digital Read-Out-10″ X86″ NMS300…..………. $ 1,900.00
- Acu-Rite Digital Read-Out-10″ X 40″ 203……………….. $ 2,850.00
- Acu-Rite Digital Read-Out-10″ X 60″ 203……………….. $ 3,350.00
- Acu-Rite Digital Read-Out-10″ X 86″ 203……………….. $ 4,000.00
- Acu-Rite Digital Read-Out-10″ X 40″ 303……………….. $ 3,350.00
- Acu-Rite Digital Read-Out-10″ X 60″ 303……………….. $ 3,800.00
- Acu-Rite Digital Read-Out-10″ X 86″ 303……………….. $ 4,500.00
- Sony or Fagor or Mitutoyo Digital Read-Out…………… $ P.O.R.
- D.R.O. Installation………………………………………………. $ 250.00
- Aloris Tool Post Set (CXA) 5 pc……………………………. $ P.O.R.
- Import Quick Change Tool Holder………………………….. $ 500.00
- Live Center MT 4……………………………………………. $ 125.00
- TVS 460V……………………………………………………… $ 500.00
