Slitters - Sheet Metal Machines

GMC PS-4816D 48 in. x 16 Ga Deluxe Gang Type Sheet Metal Powered Slitter | 110v

lt2@sierravictor.com — Thu, 27 Mar 2025 15:11:59 +0000

ISO 9001 certified
American design and Taiwan quality machine
Gang slit from 16Ga to 30Ga
Easy slide away of slitting blades for cut to length operations without slitting.
feed the sheet metal from the manual decoiler to cut to length without slitting blades
3″ diameter shafts mounted in precision ball sealed bearings
4 sets of slitting blades with stripper rings to prevent material twisting
Forward and reverse control with electrical cabinet
One year warranty for parts

STANDARD EQUIPMENT:

Comes with 4 sets of slitting blades to slit max 4 trips
Full length finger guard

SPECIFICATIONS:

Slitting and shearing capacity: width x thickness	mild steel (hot roll) Tensile 60,000PSI	48 in. x 16 ga
	stainless steel and cold roll, tensile 85,000PSI	48 in. x 20 ga
	soft aluminum, tensile 28,000PSI	48 in. x 12 ga
	min. thickness	30 ga
	Max. slitting length	20 ft
Max Sheet Material Width		49 in.
Shaft for slit blades		3 in.
Infeed/outfeed table height		33-1/2 in.
Slitting blades		4 pairs
Slitting feed speed		57 FPM
Slitting capacity: Number of cuts/strips	16Ga mild steel	1 cut / 2 strips
	18Ga mild steel	1 cuts / 2 strips
	20Ga mild steel	2 cuts / 3 strips
	22Ga-24Ga mild steel	3 cuts / 4 strips
	26Ga-30Ga mild steel	4 cuts / 5 strips
Slitting motor		1-1/2HP, 110v
Amperage draw		18A
Decoiler specifications manually operated		For coil size 48 in. width, 20 in. coil ID, Max coil weight 2T = 4,500LBS, Dimensions: 71 x 32 x 39-1/2 in.
Machine weight		1,012 lbs.
Shipping weight		1,145 lbs.
Machine Dimensions		68 x 27 x 47 in.
Shipping Dimensions		75 x 34 x 49 in.

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS:

FT-10: 10ft Outfeed table #FT-10, 121”x49”x32”: $2,750.00
FT-10: 10ft Infeed table #FT-10, 121”x49”x32”: $2,750.00
DC-4820-2T: Decoiler, 48” wide x 20” coil ID, 2Tons=4,500LBS max coil weight: $2,750.00
Extra set of slitter blades for PS-4816D: $1,950.00

The post GMC PS-4816D 48 in. x 16 Ga Deluxe Gang Type Sheet Metal Powered Slitter | 110v appeared first on Sheet Metal Machines.

GMC 48 in. x 16 Ga Gang Type Metal Powered Slitter w/Programmable Cut to Length 220v 1-ph | PS-4816GT

lt2@sierravictor.com — Thu, 13 Jun 2024 01:23:53 +0000

48″ x 16 Ga, Gang Type Metal Slitter, Powered Slitter, 220V,1 phase with NC programmable cut to length, 5″ touch screen
ISO 9001 certified
American design and Taiwan quality machine
Slit and cut to length in one unit
NC programmable cutting length, 100 job memory feature
Single cycle Mode-manual shearing with foot pedal when programmed length is reach for each cut.
Auto cycle mode-shearing will auto cycle the programmed cut lengths.
Easy removal of slitting blades for cut to length operations without slitting.
Feed the sheet metal from the manual decoiler to cut to length without slitting blades
5 in. Omron touch screen
3-1/8 in. diameter shafts mounted in precision ball sealed bearings
Slitting blades are dual edged
Safety type foot pedal control
One year warranty for parts

STANDARD EQUIPMENT:

Comes with 6 sets of slitting blades to slit max 7 trips, change it to 7 strips
Full length finger guard
Removable safety foot pedal control
One set of upper & lower shearing blades

SPECIFICATIONS:

Slitting and shearing capacity: width x thickness	mild steel (hot roll) Tensile 60,000PSI	48 in. x 16 ga
	stainless steel and cold roll, tensile 85,000PSI	48 in. x 20 ga
	soft aluminum, tensile 28,000PSI	48 in. x 12 ga
	min. thickness	30 ga
	Max. slitting length	20 ft, NC programmable
Shearing blade length		50 in.
Shearing blade rake angle		2 degree
Infeed/outfeed table height		32 in.
Slitting blades		6 pairs
Slitting feed speed		57 FPM
Shearing stroke		35
Slitting capacity: Number of cuts/strips	16Ga mild steel	1 cut / 2 strips
	18Ga mild steel	2 cuts / 3 strips
	20Ga mild steel	3 cuts / 4 strips
	22Ga-24Ga mild steel	4 cuts / 5 strips
	26Ga-30Ga mild steel	6 cuts / 7 strips
Slitting motor		3HP, 220V,1-phase
Shearing motor		3HP, 220V, 1-phase
Amperage draw		25A
Decoiler specifications manually operated		For coil size 48” width, 20” coil ID, Max coil weight 2T = 4,500LBS, Dimensions: 71 x 32 x 39-1/2 in.
Machine weight		2,850 lbs.
Shipping weight		2,950 bls.
Machine Dimensions		68 x 63 x 48 in.
Shipping Dimensions		70 x 65 x 51 in.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS:

FT-10: 10ft Outfeed table #FT-10, 121”x49”x32” LWH: $3,750.00
FT-10: 10ft Infeed table #FT-10 (when purchase Powered Slitter # PS-4816GT itself): $3,750.00
DC-4820-2T: Decoiler, 48” wide x 20” coil ID, 2Tons=4,500LBS max coil weight: $2,750.00
Extra set of slitter blades for PS-4816GT: $2,950.00
Extra set of shear blades: $1,950.00
Package: The line of Power Slitter includes: 1 set Power Slitter # PS-4816GT, 1set outfeed table, and 1 set Decoiler #DC-4820-2T: $25,550.00

The post GMC 48 in. x 16 Ga Gang Type Metal Powered Slitter w/Programmable Cut to Length 220v 1-ph | PS-4816GT appeared first on Sheet Metal Machines.

TIN KNOCKER 16 ga. Gang Slitter

smm-admin — Tue, 23 May 2023 19:46:36 +0000

Cut multiple blanks of light gauge sheet metal… in one pass!
Great for roofing and architectural!
Gang slit blanks from 16 to 30 gauge.
Slit blanks at speeds up to 60 FPM
Gang slit pre-painted and other sheet material
Life lubed bearings
3” cold rolled polish shafts
2 sets of reversible knives
Heavy duty chain drive
Stripper fingers to prevent twist
Operating Speed: 60 FPM
3/4 HP, 110/220V, 1 Phase Motor
Tool steel blades with stripper rings
(Non-scratch: pre-painted, copper, polished metals, etc.)

SPECIFICATIONS:
Overall width: 58
Width between end frames: 52-1/4″
Max Cutting Width: 48-1/2″
Table Height: 35″
Feed Speed: 60 FPM
Overall depth: 26″
Shaft Diameter: 3″
Knife Dimensions: 5” OD x 1/4”
Motor HP: 3/4 HP
Electrics: 110/220V – 1ph
Ship Dimensions: 67” x 37” x 48”
Weight: 525 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post TIN KNOCKER 16 ga. Gang Slitter appeared first on Sheet Metal Machines.

TIN KNOCKER TK2024 20 Ga. Slitter

smm-admin — Tue, 23 May 2023 19:44:31 +0000

TK 20 Ga & 16 Ga Slitters: Sturdy 24 inch throat slitters with quick adjusting back gauge and scale.
Optional Stand $195 TK 20 Ga & 16 Ga Slitters: Sturdy 24 inch throat slitters with quick adjusting back gauge and scale. Stand is optional. Available from a distributor near you. Normally in stock in one of our warehouses.

TK 20 Ga & 16 Ga Slitters: Sturdy 24 inch throat slitters with quick adjusting back gauge and scale.
Optional Stand

SPECIFICATIONS:

Capacity: 20 ga.
Throat: 24″
Motor: 1/2 HP, 115V
Minimum Slitting Width: 1.25″
Maximum Slitting Width: 24.25″
Speed (Approx.): 90 FPM
Dimensions: 42″ x 18″ x 22″
Approx. Weight: 300 lbs.

OPTIONAL ITEMS:
Stand: $CALL

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post TIN KNOCKER TK2024 20 Ga. Slitter appeared first on Sheet Metal Machines.

TIN KNOCKER Liner Table

smm-admin — Tue, 23 May 2023 19:40:11 +0000

The Tin Knocker manual insulation cutter slits fiberglass insulation to length and width.
Material is fed into the machine with a crank handle. The desired width is immediately cut with the adjustable slitter blade while the insulation is fed into the blade. The embedded scale makes for fast and accurate cutting
Once the material is at the desired length the operator pulls the handle, quickly and efficiently slitting the insulation to length with the crosscut blade.
The result is a simple and easy way to make repeatable cuts to fiberglass insulation.
Payoff reel, adjustable width
Quick cut slitter, length & width
Embedded scale for fast slitting to width
Exit table not included and this machines ships knocked down. Assembly is easy but please call Sheet Metal Machines at 386-304-3720 if you have any questions.

SPECIFICATIONS:
Overall width: 58
Width between end frames: 52-1/4″
Max Cutting Width: 48-1/2″
Table Height: 35″
Feed Speed: 60 FPM
Overall depth: 26″
Shaft Diameter: 3″
Knife Dimensions:: 5” OD x 1/4”
Motor HP: 3/4 HP
Electrics: 110/220V – 1ph
Ship Dimensions: 67” x 37” x 48”
Weight: 525 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post TIN KNOCKER Liner Table appeared first on Sheet Metal Machines.

TIN KNOCKER TDP 18 Ga. Roll Former

smm-admin — Tue, 23 May 2023 23:36:39 +0000

(Produces either TDC or TDF flanges).

At last, an affordable, full service, high quality transverse duct connector machine! This 14 station roll former comes standard with TDC or TDF Rolls, Slitter and Clip Rolls outboard. This T-D-P roll former will roll sheet metal into leak proof, sealable TDC or TDF flanges at speeds of up to 50 fpm, automatically! Start saving time and money by forming your own TDC or TDF flanges – with their snap on corners – and eliminate spot welding altogether. Buyer must specify which set of transverse duct connector rolls is wanted on the machine (TDC or TDF). Slitting and Clip Rolls come on all TDP roll formers.

SPECIFICATIONS:
Capacity: T-D-P 18-24 ga. for T-D-P Uses approx. 1-7/8″ of material on T-D-P
50 feet per minute T-D-P Clip (min. length 20″) 22 ga. 2-1/8″ 2-1/8″
Forming Sections: 14
Shaft Diameter: 1.25″
Passline: 38.625″
Forming Speed: 50 fpm
Dimensions: (LxWxH) 38″ x 136.75″ x 46″
Weight: 3,450 lbs

OPTIONAL ITEMS:
Single Phase 1HP Motor: $850.00

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post TIN KNOCKER TDP 18 Ga. Roll Former appeared first on Sheet Metal Machines.

TIN KNOCKER TK1624 16 Ga. Slitter

smm-admin — Tue, 23 May 2023 19:35:45 +0000

TK 20 Ga & 16 Ga Slitters: Sturdy 24 inch throat slitters with quick adjusting back gauge and scale.
Optional Stand

SPECIFICTIONS:
Capacity: 16 ga.
Throat: 24″
Motor: 3/4 HP, 115V
Minimum Slitting Width: 1.25″
Maximum Slitting Width: 24.25″
Speed (Approx.): 90 FPM
Dimensions: 46″ x 19″ x 30″
Approx. Weight: 550 lbs.

OPTIONAL ITEMS:
Stand for 1624: $CALL

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post TIN KNOCKER TK1624 16 Ga. Slitter appeared first on Sheet Metal Machines.