SPECIFICATIONS:
Belt Size (W x L) (In.): 4 x 79
Belt Speed (SFPM): 6600
Notch Capacity (in./OD): .5 – 2.5
Motor (HP): 4 HP
Volts: 230
Gross Weight (Lbs): 510
Net Weight (Lbs.): 344
Prop 65: Cancer and Reproductive Harm

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post BAILEIGH TN-400X3 4 x 79 in. 3-Station Abrasive Tube Notcher appeared first on Sheet Metal Machines.

SPECIFICATIONS:
Maximum Material Capacity: 11-gauge
Notching Angle: 90°
Approx. Shipping Dimensions: 15 x 15 in. OR 15 x 40 in. (bench mounted vs. stand mounted)
Approx. Shipping Weight: 220 lbs.

Call us at (386) 304-3720 for more information
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 2 YEAR

The post HM MACHINERY 4 x 4 in. x 11 ga. Manual Corner Notcher | HM ES100/3 appeared first on Sheet Metal Machines.

SPECIFICATIONS:
SKU: 1400P
Tonnage: 8
Power Source: Manual

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: Limited

OPTIONAL ITEMS:

• The Arc-Fit Housing holds Arc-Fit Assemblies, which is the punch and die that produces the notch. To notch with our Arc-Fit tools, you need a Housing, and Assembly and a Press to provide power. The charts below indicate the maximum capacity of each housing. You may order many assemblies for each housing, or one housing for each assembly. This eliminates change over time and increase efficiency. Hardware and springs are included with each housing. The 201A Punch Press Adaptor is used to mount (1) Arc-Fit Housing in Vogel’s Hydraulic Press, we also offer a turntable that fits our Hydraulic Press that includes (3) housings.
• An Arc-Fit Assembly consists of three pieces, the round punch, square punch holder and rectangular die (tube rest). When worn, (typically 10,000 – 20,000 notches or more), you can send your punch and die to Vogel for sharpening, or simply replace just the worn items.
• How it works: The tube is slid onto the tube rest, over the punch. As the punch and punch holder are depressed, the punch notches the bottom wall of the tube. The tube is rotated 180º and the first notch, now on the top of the tube, is visually aligned with the scribe lines on the punch holder. The 2nd notch is made and the tube is ready for welding or brazing. These spring-loaded tools may be powered by most press brakes, ironworkers, punch presses. The #35 Housing can be powered by Vogel’s Hand or Hydraulic Presses. The #35 & #75 Housings can be powered by Vogel’s Hydraulic Press, see the charts below.
• In addition to notching a tube or pipe to fit the same size OD, we can make custom Arc-Fit assemblies. Examples of some of the many custom assemblies we can offer include:
  • One size tube to fit a different size
  • Custom shaped slots
  • Notches with drainholes and more

  Please contact us to discuss your specialized notching application.

• To notch pipe or notch tubing with our Arc-Fit system, you need a Housing, an Assembly for each pipe notching or tube notching application, and a Press to provide power. Some 90 degree Arc-Fit Assemblies can be powered by Vogel’s affordable and portable Hand Press. We also offer a 120V Hydraulic Power Unit. You can also install our Arc-Fit Housing and Assemblies in your own ironworker, press brake or punch press.
• How does an Arc-Fit Assembly work? Your tube or pipe is slid, horizontally, over the tube rest and onto the punch. The square punch holder functions as a stop, to insure every notch is the same depth.
• The press pushes the punch & punch holder downward, through the bottom wall of your material. The tube rest is also a cutting edge, supporting the underside of your material, preventing deformation. In most cases (round pipe fitting round pipe, for example), the material is rotated 180° and a second notch made. Simple scribe lines on the punch holder help line up the material for the second notch. Arc-Fit tools are designed for many years of use. We frequently hear from customers replacing tools that have been in service for 10, 15, 20 years and longer.
• Please Note: An Arc-Fit assembly can be used for the same OD, but thinner wall. For example, if you want to notch 1-1/2″ OD x 18 gauge, choose our 16 gauge assembly. Over the past eight decades, we have made thousands of custom Arc-Fit assemblies to suit specific applications. Examples of custom Arc-Fit assemblies include notching applications such as:
  • A gauge not shown below
  • One size notched to fit a different size
  • Larger sizes, up to 6-5/8″ OD
  • Square or rectangular tubes notched to fit round
  • A notch to fit another tube with an drainhole

  Please contact us to discuss your specific custom notching application. The list below is only our most popular notching tools that fit our #35 Housing (tubes and pipes that are 2-3/8″ or smaller OD). If you want to notch larger sizes (up to 6″ OD!), please contact us to discuss your specific notching applications. Assemblies for schedule 1″ through 2″ x schedule 40 pipe are offered at the lowest prices. Why? Because these are our most popular sizes, we build them in very large quantities and we are able to pass the savings on to you.

• **All Arc-Fits with an “A” designation after the part number (i.e. 9205A) are designed for mild steel or stainless pipe or tubing. Pipe that deviates from ASTM standards, with properties such as increased yield strength, or tubing made of HSLA materials high-strength alloys will exceed the capacity of our tooling and cannot be successfully notched with the Arc-Fit process. Use of our tools in these situations is NOT recommended and can result in tool failure and risk of injury.
• **It is the customer’s responsibility to ensure that the material is appropriate and suitable for Vogel tools. Material issues interfering with Vogel tool performance are not considered a manufacturing defect and will not be covered under Vogel’s product warranty. Returns will not be accepted for tools damaged by use with inappropriate materials.

The post VOGEL TOOL & DIE 1400 Arc-Fit Manual Pipe Notching Press appeared first on Sheet Metal Machines.

• Notcher with either style punch & die (#1 or #3) with Non-Marring Feed Wheel
• Automatic Power Notcher for the Heating, Air Conditioning and Sign Industry
• Fast, Simple, Flexible
• The Ruoff Notcher is a punch press with an adjustable automatic feed. It is precision designed for punching various shapes, along the edge of sheet material.
• Sheet steel, galvanized iron, aluminum, plastics, cardboard, or any sheet material that can be punched, can be handled by the Ruoff Notcher.
• Each Ruoff Notcher is fully guaranteed for 90 days after date of purchase. Shipping is immediate. The Ruoff Notcher is easily installed in less than five minutes.
• Compact self-contained unit provides safety and convenient trouble-free service.
• Standard punch and dies provide either 15° notch or a 3/32″ slot. Other patterns are available. The punch and die can be sharpened several times.
• TO MEET SPECIAL REQUIREMENTS: The need for notching heavier gauges, wider spacing, or meeting other specific conditions beyond the scope of the standard Ruoff Notcher can often be met by minor modifications. Inquiries are invited regarding these special needs.

Item/Model: RUOFF NOTCHER R-APN-NM

The post RUOFF NOTCHER Automatic Power Notcher with Non-Marring Feed Wheel appeared first on Sheet Metal Machines.

• Hardened steel blades (reversible uppers)
• Split head: allows for and adjustable tab – 0-1”
• Gage Plate (table)
• 2 – Gauges (45 degree mitre on one end)
• Angle Iron Stand
• Hydraulic System

The post TIN KNOCKER Hydraulic Corner Notcher appeared first on Sheet Metal Machines.

• SHEAR, NOTCH & BEND ANGLE IRON WITH EASE.
• Here is VERSATILITY AND MULTI-FUNCTIONALITY!
• Great for making sign frames, trailer frames, machine stands, or anything using angle iron.
• Stand and Extension Bar, Included

The post TIN KNOCKER Angle Iron Worker appeared first on Sheet Metal Machines.

• Notcher with either style punch & die (#1 or #3)
• Automatic Power Notcher for the Heating, Air Conditioning and Sign Industry
• Fast, Simple, Flexible
• The Ruoff Notcher is a punch press with an adjustable automatic feed. It is precision designed for punching various shapes, along the edge of sheet material.
• Sheet steel, galvanized iron, aluminum, plastics, cardboad, or any sheet material that can be punched, can be handled by the Ruoff Notcher.
• Each Ruoff Notcher is fully guaranteed for 90 days after date of purchase. Shipping is immediate. The Ruoff Notcher is easily installed in less than five minutes.
• Compact self-contained unit provides safety and convenient trouble-free service.
• Standard punch and dies provide either 15° notch or a 3/32″ slot. Other patterns are available. The punch and die can be sharpned several times.
• TO MEET SPECIAL REQUIREMENTS: The need for notching heavier gauges, wider spacing, or meeting other specific conditions beyond the scope of the standard Ruoff Notcher can often be met by minor modifications. Inquiries are invited regarding these special needs.

Item/Model: RUOFF NOTCHER R-APN

The post RUOFF NOTCHER Automatic Power Notcher appeared first on Sheet Metal Machines.

SPECIIFICATIONS:
Maximum Capacity Notching – Mild Steel: 16 ga
Maximum Capacity Piercing – Mild Steel: 18 ga
Notch: 6″ x 6″ x 90°
Dimensions, Handles Removed (LxWxH): 19″ x 18″ x 15″
Shipping Weight: 170 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 3 YEAR – Limited

OPTIONAL ITEMS:

• 86130: MODEL 16-18 Box Flange Blades set of 4: $700.00
• 86120: Floor Stand for Model 16-18 Notcher: $400.00

The post TENNSMITH 16-18-BF Notcher with Box Flange Blades appeared first on Sheet Metal Machines.

Item/Model: BIRMINGHAM Y-16-C

The post BIRMINGHAM Hand Notcher Y-16-C appeared first on Sheet Metal Machines.

• This tool notches drive cleats giving drives a rounded end for an easier installation. Notch drive cleats before or after they are formed. Easy to use with a spring loaded push handle. This tool easily mounts to any bench.

The post TIN KNOCKER Drive Cleat Notcher appeared first on Sheet Metal Machines.