• The H 820 is a hybrid model of the H7 SA and H8 SA. The H820 offers the largest capacity for round material. We can supply custom jaws for different size round material (see pictures)
• Semiautomatic
• Straight cut
• Double column
• Carbide guides w/ rollers
• 5 Degree cant
• Perfectly counter balanced for easy miters
• Clamping on both sides of cut
• Vibration free sawing in a range of interrupted and solid materials
• All moving components on linear bearing guides
• Hydraulic blade tension
• Top clamp
• Capacities shown are max envelope. Each individual cutting job must be considered with regards to type and shape of material, and quantity of pieces per day.

STANDARD EQUIPMENT:

• One Bi-metal saw blade
• Low voltage control
• TEFC 3 phase drive motor
• Totally enclosed worm gear transmission
• Full Coolant System
• Full Blade Guarding
• Operators Manual Parts List/Schematics
• Tool kit

Item/Model: Saws H820SA

The post Saws Semi-Automatic Double Column Bandsaw H820SA appeared first on Sheet Metal Machines.

• Semiautomatic
• When a heavy duty bandsaw is needed for structural steel look no further than the H7 SA, H8 SA or the H12 SA.
• Straight cut
• Double column
• 5 Degree cant
• Carbide guides w/ rollers
• Largest beam capacity
  • H7 SA W24
  • H8 SA W30
  • H12 SA W36
• Perfectly counter balanced
• Clamping on both sides of cut
• Vibration free sawing in a range of interrupted and solid materials
• All moving components on linear bearing guides Hydraulic blade tension on H8 SA and H12 SA
• Rear guide is fixed, the outside guide automatically moves close to the cut
• Capacities shown are max envelope. Each individual cutting job must be considered with regards to type and shape of material, and quantity of pieces per day.

STANDARD EQUIPMENT:

• One Bi-metal saw blade
• Low voltage control
• TEFC 3 phase drive motor
• Totally enclosed worm gear transmission
• Full Coolant System
• Full Blade Guarding
• Operators Manual Parts List/Schematics
• Tool kit

Item/Model: Saws H7SA / H8SA / H12SA

The post Saws Double Column Semi-Automatic Band Saws H7SA / H8SA / H12SA appeared first on Sheet Metal Machines.

• The H6A-NC barfeed is a true shuttle-vise machine. The machine is fully programmable to automatically program and store jobs for later recall. Two saw vises on the infeed side ensure the material is clamped and never released during all feeding and sawing operations. Barfeeder travels on linear guides, and driven by heavy duty ball screw for maximum accuracy. Both feeder vise jaws clamp & unclamp, to facilitate crooked material. Operation is straightforward and logical. The machine may be used as a single cut (semi-automatic) or fully automatic machine to repetitively cut your material to length. You program the length, size of material, blade speed and quantity at the keyboard.
• Canted 5 degrees
• Manual mitering up to 60 degrees
• Feeder stroke 20″ w/ unlimited indexes
• Scrap end 4″
• Carbide guides w/ rollers
• Time saving material sensor
• Easy setup
• Ball screw feeder accuracy +/- 0.005″ per index
• Job memory
• Capacities shown are max envelope. Each individual cutting job must be considered with regards to type and shape of material, and quantity of pieces per day.

STANDARD EQUIPMENT:

• One Bi-metal saw blade
• Low voltage control
• TEFC 3 phase drive motor
• Totally enclosed worm gear transmission
• Full Coolant System
• Full Blade Guarding
• Operators Manual Parts List/Schematics
• Tool kit

Item/Model: Saws H 6 A-NC

The post Saws Double Column Automatic Bandsaw H 6 A-NC appeared first on Sheet Metal Machines.

• Semiautomatic
• Miters 60 degrees right
• 6 Degree Cant
• Capacity for W 21 beams
• Perfectly Counter Balanced
• Large Scale for accurate miters
• Vibration free sawing in a range of interrupted and solid materials
• All moving components on linear bearing guides
• Carbide Guides w/ rollers
• Capacities shown are max envelope. Each individual cutting job must be considered with regards to type and shape of material, and quantity of pieces per day.

STANDARD EQUIPMENT:

• One Bi-metal sawblade
• Low voltage control
• TEFC 3 phase drive motor
• Totally enclosed worm gear transmission
• Full Coolant System
• Full Blade Guarding
• Operators Manual Parts List/Schematics
• Tool kit

Item/Model: Saws H 6 SA

The post Saws Double Column Semi-Automatic Bandsaw H6SA appeared first on Sheet Metal Machines.

• Semiautomatic
• Double miter 60 degrees Double column
• 6 Degree Cant
• Capacity for W 24 beams
• Perfectly Counter Balanced
• Large Scale for accurate miters
• Vibration free sawing in a range of interrupted and solid materials
• All moving components on linear bearing guides
• Carbide Guides w/ rollers
• Capacities shown are max envelope. Each individual cutting job must be considered with regards to type and shape of material, and quantity of pieces per day

STANDARD EQUIPMENT:

• One Bi-metal sawblade
• Low voltage control
• TEFC 3 phase drive motor
• Totally enclosed worm gear transmission
• Full Coolant System
• Full Blade Guarding
• Operators Manual Parts List/Schematics
• Tool kit

Item/Model: Saws KS 652

The post Saws Double Column Semi-Automatic Bandsaw KS 652 appeared first on Sheet Metal Machines.

• Double mitering 60 degrees left and 60 degrees right.
• Canted sawframe canted 6 degrees
• Semi-automatic horizontal bandsaws allow quick and easy setup and operation. Major components are massive for solid, vibration-free production cutting. Machine operation is full cycle, semi-automatic. Material size is automatically sensed by the sawframe. With the push of a single button, the vise clamps, sawframe makes the cut at preset rate, automatically returns to clear work piece, vise opens, ready for the next cut. Production sawing can be very fast! Fully hydraulic, with free-standing operators console that may be conveniently placed in the most advantageous operator location.
• Mitering is effortless with perfectly counterbalanced frame on bearings.
• Material sensor, saw will rapid down until it touches material then go into controlled rate. After cut is complete the sawhead will lift to just above the material ready for the next cut.
• Carbide guides w/ rollers
• Capacities shown are max envelope. Each individual cutting job must be considered with regards to type and shape of material, and quantity of pieces per day.

STANDARD EQUIPMENT:

• One Bi-metal sawblade
• Low voltage control
• TEFC 3 phase drive motor
• Totally enclosed worm gear transmission
• Full Coolant System
• Full Blade Guarding
• Operators Manual Parts List/Schematics
• Tool kit

Item/Model: Saws KS 620

The post Saws Semi-Automatic Horizontal Bandsaw KS 620 appeared first on Sheet Metal Machines.

• Fully automatic, fully hydraulic heavy one piece unified construction for superb alignment and accuracy.
• Fully hydraulic
• Manual mitering up to 60 degrees
• Feeder stroke 20″ w/ unlimited indexes
• Scrap end 5″
• Carbide guides w/ rollers
• Time saving material sensor
• Easy setup
• Top clamp
• Feeder accuracy +/- 0.008″ per index
• H400 A-NC additional features
  • Job memory
  • Ball screw feeder +/- 0.005″ per index
• Capacities shown are max envelope. Each individual cutting job must be considered with regards to type and shape of material, and quantity of pieces per day.

STANDARD EQUIPMENT:

• One Bi-metal saw blade
• Low voltage control
• TEFC 3 phase drive motor
• Totally enclosed worm gear transmission
• Full Coolant System
• Full Blade Guarding
• Operators Manual Parts List/Schematics
• Tool kit

Item/Model: Saws H 400 A / H 400 A-NC

The post Saws Automatic Bandsaw H400A / H400A-NC appeared first on Sheet Metal Machines.

• DC 12 A-NC w/X Smart Technology
• Double column construction with all moving components on linear bearing guides
• Precision feeder with gear motor and ballscrew
• Cabinet panels are hinged for easy cleaning and maintenance
• Small 2″ scrap end
• Feeder accuracy +/- 0.005″ per index
• Easy programmable controls, recall jobs
• Material sensor
• LED lighting
• Variable vise pressure
• Double vise clamps on both sides of material
• Vibration free sawing in a range of interrupted and solid materials
• Blade tension indicator
• Capacities shown are max envelope. Each individual cutting job must be considered with regards to type and shape of material, and quantity of pieces per day.

STANDARD EQUIPMENT:

• One Bi-metal saw blade
• Low voltage control
• TEFC 3 phase drive motor
• Totally enclosed worm gear transmission
• Full Coolant System
• Full Blade Guarding
• Operators Manual Parts List/Schematics
• Tool kit

Item/Model: Saws DC 12A-NC

The post Saws Double Column Automatic Saw DC12A-NC appeared first on Sheet Metal Machines.

• Packed with many features usually only seen on more expensive saws the H310 A and H 310 A-NC offer fully automatic sawing in a tight footprint.
• Fully hydraulic
• Manual mitering up to 60 degrees
• Feeder stroke 20″ w/ unlimited max feed length Scrap end 8″
• Carbide guides w/ rollers
• Time saving material sensor
• Easy setup
• Feeder accuracy +/- 0.008″ per index
• Job memory
• Ball screw feeder +/- 0.005″ per index

STANDARD EQUIPMENT:

• One Bi-metal saw blade
• Low voltage control
• TEFC 3 phase drive motor
• Totally enclosed worm gear transmission
• Full Coolant System
• Full Blade Guarding
• Operators Manual Parts List/Schematics
• Tool kit

Item/Model: Saws H 310 A-NC

The post Saws Automatic Hydraulic Horizontal Band Saws H310A-NC appeared first on Sheet Metal Machines.

• Semiautomatic
• Double miter 60 degrees Double column
• 6 Degree Cant
• Capacity for W 18 beams
• Perfectly Counter Balanced
• Large Scale for accurate miters
• Vibration free sawing in a range of interrupted and solid materials
• All moving components on linear bearing guides
• Carbide Guides w/ rollers
• Capacities shown are max envelope. Each individual cutting job must be considered with regards to type and shape of material, and quantity of pieces per day.

STANDARD EQUIPMENT:

• One Bi-metal saw blade
• Low voltage control
• TEFC 3 phase drive motor
• Totally enclosed worm gear transmission
• Full Coolant System
• Full Blade Guarding
• Operators Manual Parts List/Schematics
• Tool kit

Item/Model: Saws H 5 SA

The post Saws Double Column Semi-Automatic Band Saw H5SA appeared first on Sheet Metal Machines.