Designed To Do The Following

• • Removing sharp edges and burrs from:
    • Metal workpieces (e.g., after cutting, drilling, or grinding)
    • Wood workpieces (e.g., after sawing or routing)
    • Plastic workpieces (with appropriate sanding belts)
  • Smoothing rough surfaces on:
    • Wood (e.g., before finishing)
    • Metal (e.g., before painting or coating)
  • Flattening uneven surfaces on:
    • Wood (e.g., tabletops, doors)
    • Metal (e.g., sheet metal, plates)
  • Removing rust from metal surfaces
  • Cleaning up old paint or finishes from wood or metal
  • Preparing surfaces for bonding or adhesives

Materials the S4S Can Sand

• • Wood: Softwoods, hardwoods, plywood, veneers, etc.
  • Metal: Steel, aluminum, brass, and other ferrous and non-ferrous metals (use appropriate sanding belts).
  • Plastics: Many types of plastics, but test on a scrap piece first.
  • Fiberglass: Use caution and appropriate sanding belts to avoid damaging the material.
  • Composites: Some composites can be sanded with the S4S, but research specific recommendations for the type you’re working with.

OPTIONAL MODELS:

• Model S4S –  Sander with OSHA Guard: $875.00
• Model S4S-1 – Sander with OSHA Guard, 1HP: $1,065.00

SPECIFICATIONS:

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post KALAMAZOO S4S 4×36 in. Industrial Belt Sander appeared first on Sheet Metal Machines.

Key Features

• • Wet Sanding Advantage: Integrated pump and tank system for cooler metalworking, reduced dust, and smoother finishes.
  • Powerful & Precise: Effortlessly tackles demanding metalworking tasks.
  • Built to Last: Heavy-duty construction for long-term reliability.
  • Easy Operation: One-knob belt tracking, intuitive controls.

Key Applications of the Kalamazoo S8W Vertical Wet Sander

• • Deburring & Smoothing: Create clean edges and flawless metal surfaces.
  • Shaping & Beveling: Produce custom shapes and precise angles.
  • Flattening & Squaring: Achieve perfect flatness and square ends for accurate project assembly.
  • Heavy Metal Removal: Efficiently handle demanding material removal tasks.
  • Wet Polishing & Cleaning: Get a smooth, polished finish and remove imperfections.
  • Sharpening: Restore the cutting power of blades, tools, and other metal implements.

SPECIFICATIONS:
Type: Wet
Belt Size: 8 x 60 in.
Belt speed: 3500 SFPM
Motor: 7.5 HP, 3-phase (specify 220V or 440V when ordering)
Sander amp draws: 230V 20.2 amps/440V 10.1 amps.
Pump amp draws: 230V is .9 amps/460V .52 amps.
Motor RPM: 1725
Air sanding belt tension: 40-50 psi required
Cast iron table: 8 x 12 in. table and a 5/8 in. slot for the mitre gauge
Platen working surface: W 8 x H 13 in.
Shipping Weight: 775 lbs.
Shipping Dimensions: L 55 x W 39 x H 74 in.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post KALAMAZOO S8W 8×60 in. Vertical Wet Belt Sander appeared first on Sheet Metal Machines.

SPECIFICATIONS:
Type: Wet
Belt size: 10 x 90 in.
Motor: 10HP 3PH 230V or 460V motor (specify)

Amp draws
Motor: 230V 24 amps and 460V 12 amps
Pump: 230V .9 amps and 260V .52 amps

Belt Speed: 3,500 SFPM
Steel platen: 10 x 29 in.
Work Surface: 10 x 28 in.
Work Table Tilt: 45° down and 15° up
Belt tension: Air tension (40 to 50 psi required)
Shipping Dimensions: L 48 x W 53 x H 80 in.
Total Shipping Weight: 1,600 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS – CALL FOR PRICE:

• KWB109050 10″ x 90″ 50 grit aluminum oxide sanding belt
• KWB109080 10″ x 90″ 80 grit aluminum oxide sanding belt
• KWB1090100 10″ x 90″ 100 grit aluminum oxide sanding belt
• Variable frequency drive

The post KALAMAZOO S10W 10×90 in. Heavy Duty Wet Vertical Industrial Sander appeared first on Sheet Metal Machines.

This unit is great for but not limited to the following applications:

• • Bevel and deburr
  • Round an end
  • Square and end
  • Flattening
• All parts that Kalamazoo Industries manufacture’s for this DS12DH are replaceable no matter the age of this unit. Additionally all parts are kept in stock
• Kalamazoo Industries DS12DH inch industrial multi use disc sander has applications in the following industries: Energy, Oil/Natural Gas, Petro/Chemical, Knife Manufacturing, Automotive, Metal Foundries, as well as many other Manufacturing and Fabrication environments
• MADE IN USA

SPECIFICATIONS:
Motor: 3HP 1PH or 3PH (specify voltage at time of order)
Dual aluminum discs: 12″

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post KALAMAZOO DS12DH 12 in. Double Head Industrial Disc Sander appeared first on Sheet Metal Machines.

SPECIFICATIONS:
Abrasive Chop Saw Wheel: Houses 16″ to 18″
Motor: 15HP 3PH; Optional 20HP 3PH motor (call for pricing).
Spindle Arbor: 1″
Shipping Dimensions: L 28″ X W 20″ X H 40″
Approximate Shipping Weight: 650 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS:
Optional 20HP 3PH motor (call for pricing).

The post KALAMAZOO K16-18WR 18 in. Wire Rope Chop Saw appeared first on Sheet Metal Machines.

SPECIFICATIONS:
Belt speed: 5300 SFPM
Removable and replaceable material work stop. Stop size: 11″ W X 8.5″ H
Adjustable work plate – work plate size: 14″ D X 26″ W
Motor: 10HP 3PH 230V or 460V TEFC motor (specify voltage at time of order)
Amp draw: 208V 26.5 amps, 230V 24 amps and 460V 12 amps

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post KALAMAZOO S10ES 10×90 in. Industrial Edge Sander appeared first on Sheet Metal Machines.

1SMVP 1 X 42 INCH INDUSTRIAL MULTI POSITION BELT SANDER IS DESIGNED TO BE USED IN THE FOLLOWING SANDING APPLICATIONS

• • Square and End
  • Round Flat Corners
  • Blending
  • Finishing
  • Cleaning
  • Designed to sharpen knives

What material can this multi position belt sander sand

• • Sand wood
  • Sand metal
  • Sand aluminum
  • Sand Plastic
  • Sand PVC

Where can this 1 inch multi position belt sander used?

• • This multi position belt sander can be used in any size work shop to sand metal and is designed to sharpen knives.
• Steel tilt and removable work table – vertical sander only. Table size: 3″ W x 3″ D. Table can tilt approximate 20 degrees up and 45 degrees down.
• Steel adjustable plate. Platen size: 1-7/8″ W x 5-7/8″ H. (ships with machine)
• Easy tracking.
• Multi position belt sander. Can be placed in various positions such vertical, horizontal and anything in between.
• Will fit on any size workbench

Optional models:

• • Model: 1SM.
  • Model: 1SMS – 1sm with full boxed OSHA guard.
  • Model: 1SMV- As above with enclosed belt guard and vacuum base.
• Optional: 1/3Hp 1Ph 110 or 220v (please specify voltage), 1/3HP 1PH, 50HZ, 1425 RPM.
• Optional: steel knife makers platen (563-042). See picture for dimensions. Can be purchased at a later date and can be easily swapped out with the platen that ships with the sander.

SPECIFICATIONS:
Belt Dimensions: 1″ x 42″
Drive wheel: 4″
Motor: 1/3 HP, 1 PH, 115V, 1725 RPM
Belt speed: 1800 SFPM
Table Size: 3″ W x 3″ D
Table Tilt: 20° up and 45° down
Platen size: 1-7/8″ W x 5-7/8″ H
Amp draw: 115V 5.4 amps, 208V 2.9 amps and 230 2.7 amps.
Shipping dimensions: L 12″ x W 17″ x H 28″
Weight: 35 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS:
563-042: Knife makers platen – $CALL

The post KALAMAZOO 1SMVP 1×42 in. Industrial Multi Position Belt Sander appeared first on Sheet Metal Machines.

Materials Conquered:

• • Wood: Hardwood, softwood, plywood, lumber, veneers – smoothen surfaces, remove glue lines, shape wood.
  • Metal: Steel, aluminum, brass, copper – deburr edges, remove rust, achieve brushed finishes.
  • Plastics: Acrylic, PVC, nylon – refine surfaces, create smooth edges.
  • Fibreglass: Sanding for finishing or repair.

Sanding Techniques:

• • Flat sanding: Smoothing large surfaces with the belt parallel to the material.
  • Edge sanding: Tilting the head for beveling and deburring corners.
  • Contour sanding: Following the curves of the workpiece with controlled movements.
  • Finishing sanding: Using finer grits for a polished, professional look.
  • Sharpening tools: Grinding edges of chisels, axes, and other tools.

Where the 2FSM 2 x 48 Inch Kalamazoo Sander Thrives:

• The 2FSM’s versatility makes it a valuable asset in various settings, including:
• Workshops:
  • Woodworking shops for crafting furniture, cabinets, and other wooden projects.
  • Metalworking shops for shaping and finishing metal parts and components.
  • Restoration and repair shops for reviving furniture, antiques, and machinery.
  • Hobbyist spaces for DIY enthusiasts and craftspeople.
• Industrial Settings:
  • Manufacturing facilities for sanding and finishing products or components.
  • Metal fabrication shops for preparing metal surfaces for welding or painting.
  • Construction sites for shaping and smoothing lumber or other materials.
• Educational Institutions:
  • Vocational schools and trade programs for teaching woodworking and metalworking skills.
  • College and university workshops for student projects and research.
• Creative Studios:
  • Artist studios for sculpting, shaping, and texturing materials.
  • Prop makers and set designers for creating theatrical or film props.
  • Makerspaces and DIY communities for collaborative projects and experimentation.

SPECIFICATIONS:
Belt Size: 2 x 48 in.
Motor: 1/2 HP, 1PH, 115V
Belt speed: 4500 SFPM
Tracking system: One knob tracking
Work table dimensions: 5 W x 2.5 D in.
Platen size: 2.75 W x 8 H in.
Shipping Dimensions: L 12″ x W 17″ x H 28″
Shipping Weight: 50 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS – CALL FOR PRICE:
12-P steel stand
KB24850 2″ x 48″ 50 grit belt
KB24880 2″ x 48″ 80 grit belt
KB248100 2″ x 48″ 100 grit belt

The post KALAMAZOO 2FSMS 2×48 in. Industrial Abrasive Belt Sander with Full Safety Guard appeared first on Sheet Metal Machines.

SPECIFICATIONS:
Motor: 10HP, 3Ph, 220V or 440V (please specify)
Belt Dimensions: 3″ x 132″
Duro Serrated Contact wheel: Dual 14″ x 3″, 70″
Speed: 6300 SFPM

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS: CALL FOR PRICE:
Variable speed drive
Work Table
Other size backstand grinding units available.

The post KALAMAZOO BG214 3×132 in. Dual Headed Abrasive Backstand Grinder appeared first on Sheet Metal Machines.

SPECIFICATIONS:

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post KALAMAZOO Abrasive Wheels appeared first on Sheet Metal Machines.