Description
- The model CM straight side press is perfect for full length forming at full tonnage as well as left to right and off-center loading at full tonnage via our extremely heavy duty gibbing system and enclosed end frame design. The model CM also allows full front to back off-center loading the entire width of the press bed. No other design of press will give you more tonnage over the bed area.
- The model CM straight side press is a more traditional style of straight side with much more left to right bed and ram area than the smaller bed DCSS presses. The CM is able to hold tolerance left to right much better than a direct hydraulic design due to its bellcrank linkage that gives the press full tonnage from one end of the press to the other.
- Our single cylinder design develops full tonnage anywhere along the bed left to right and front to back. The bellcrank linkage system is actuated with a single cylinder utilizing A660 bronze at the bearing points. These off the shelf material bearings are designed to withstand up to 6 times the machines overall tonnage and they are covered by our extensive 5 year parts warranty. The model CM is truly designed to accept virtually all forms of press applications whether it is punching, forming, blanking, coining, swedging, die tryout, trimming, drawing and so on. The CM is available up to 1,000 tons and particularly excels at progressive die set ups where you have varying amounts of tonnage being applied across the bed all in the same stroke.
- 100% made in the USA with our unmatched 5 year parts warranty plus a lifetime of readily available parts all from your local suppliers. You will never have another “orphaned” machine due to an overseas manufacturer who can’t get you parts or a domestic manufacturer with proprietary parts that forces you to buy everything from them. With Standard Industrial you will always be able to get the part you need for the lifetime of the machine from any number of sources available to you.
OPTIONAL ITEMS:
- Optional AUTOMEC CNC Control
- Programmable logic controller (PLC) to control the base functions of the press including multiple job storage, stroke length, open height point, tonnage, decompression, ram delay/dwell at bottom of stroke (not under tonnage A mechanical standard to control limits of the press and is also included even with PLC.
- Light curtain safety barrier system provides infra-red beam during operation and shuts machi Base op front of press only-other optional curtains can be quoted per customer specification.
- Interlocking side barriers as physical barriers-can be used in conjunction with light curtains or alone
- Special single color paint
- Dwell under tonnage sustains desired tonnage for a set amount of time – typically used for manufacturers of plastics or fiberglass products
- Custom or special controls per user specifications
- Remote auto cycle for automated operations
- Special machining of bed and/or ram
- Removable bolster plates for bed
- Die cushions for drawing and/or part ejection
- Ejector cylinders for drops or parts
- Scrap chutes or knockouts to remove drops or parts
- Stroke dampers for punching or blanking operations allow more overall dimensions to increase
- Quick change tooling components such as air actuated die lifters and/or power die removal systems-increase productivity by decreasing die change and set-up time
- High speed or special hydraulic systems
- T-slots in bed and ram (2 are standard in bed and ram)
- Automatic lubrication systems to decrease maintenance operations
- Safety gear lock systems with interlocking posts provide even more operator safety (Model AP only)
- Additional open height (NOTE: Does not automatically increase stroke length)
- Additional stroke for Model AP Four column press
(NOTE: Does not automatically increase open height) - Low speed retract allows the ram to return slower than normal
- Pressure ram reversal allows the ram to return when a particular pressure is achieved.
- Ram delay at bottom of stroke (not under tonnage)
- Coil line processing and material feeding equipment
- Custom and standard die sets
- The model AM, DC and DCSS can have longer open heights but are limited to a maximum of 12″ stroke as an option
- The model AM is available in longer lengths but not shorter lengths
- W-Technologies stroke dampers allow more punching and blanking capacity without harming hydraulic system
