Description
- Finish Pro Model FP-5160T Dry Type Line Graining/Deburring/Finishing machine
- Made in Taiwan
- Computerized programmable thickness control
- Abrasive belt size: 51” x 60”
- 10″ diameter heavy duty drum for perfect graining
- 5-1/8″ wide opening for max. workpiece thickness 5″
- Motorized Table Lift with LED display
- Variable Speed Conveyor
- Conveyor Forward and Reverse
- Belt Safety Overtravel Switches
- Electronic Eye Belt Tracking. Belt tracking adjusting lever ( Belt Trimmer ) to Re-adjust the tracking system when running extremely out of parallel belts
- 4-Jackscrew Table Support
- Double Infeed and Outfeed Pinch Rolls with protective guards
- Conveyor Belt Tracking System
- Safety System with Disc Brake. Air operated disc brakes to stop sanding head in 3-5 seconds in the even of loss of air pressure or activation of any emergency stop device
- Table Height Digital Readout
- Load Meter indicates percentage of full motor loads
- Belt change door electrically interlocked for safety purpose
- Air tensioning of belt for accurate tensioning and compensation of belt stretch
- Quick release sanding head support for fast belt change
- Dust collection hood with 6” outlet is located adjacent to abrasive head in sanding area
- Emergency stops from almost any point
- Noise level bellows 82 dba
- Operation manual, control tags, danger signs, and warning labels in English on machine
- 208/230V, 3-Phase ( 440/460V is available )
- One year Industrial Warranty for parts.
- NOTE:
- Prices are for 208-230 VOLTS
- Total amps 120 @ 230/3/60
- COMPRESSED AIR REQUIRED: 2 CFM @ 90 PSI
- CAUTION: If fire hazardous materials, such as aluminum, titanium, magnesium, etc., are to be processed, a dust collection system that conforms to National Fire Protection Association (NFPA) should be used.
- DISCLAIMER: Please note this machine is incompatible with the use of a rotary phase converter. Any attempt to purchase, install, or employ one, whether carried out by you or a professional service company, will automatically void the warranty. It is crucial to understand that any such actions are entirely the responsibility of the buyer.
- This disclaimer is intended to clearly convey that the utilization of a rotary phase converter to power or operate this machine is not supported.
SPECIFICATIONS:
|
Max. Part Width
|
51 in.
|
|
Abrasive Belt Size
|
51 x 60 in.
|
|
Contact Roller Size
|
8 in. Dia.
|
|
Passline Height
|
31-37 in.
|
|
Thickness Capacity
|
20Ga to Max. 5-1/8 in.
|
|
Conveyor Drive Speeds
|
15-56 FPM
|
|
Infeed Conveyor Length
|
20 in.
|
|
Dust Collector Capacity
|
2,800 CFM
|
|
Outlet of dust hood
|
Dia 6 in. x 2 outlets
|
|
Main Motor
|
30 HP, 230/460v, 3-ph
|
|
Conveyor Motor
|
2 HP, 230/460v, 3-Ph
|
|
Table Lifting Motor
|
2 HP, 230/460v, 3-Ph
|
|
Amperage Draw
|
120A on 220V, 60A on 440V
|
|
Machine Weight, approx.
|
4,190 lbs
|
|
Machine Dimensions LxWxH
|
82 x 68 x 73 in.
|
|
Machine Shipping Dimensions LWH
|
84 x 70 x 75 in.
|
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
OPTIONAL ITEMS:
WET DUST COLLECTORS use a water filled tank through which all grinding dust is pulled by a motor driven impeller fan. Particles sink to the base of the tank where they can easily be removed by raking into a provided container. Normal tap water is used, there are not filter bags to be changed. Water level is automatically controlled when unit is connected to a water supply. All units are equipped with explosion relief door and sound silencer.
*This machine requires two sets Wet Dust Collectors #WDC-2100 & 2 sets of ducting packages
- WDC-2100 – Wet Dust Collector, 5 HP, 2100CFM (it is demo wet collector, all stainless steel): $11,950.00
- HDDP-2560 – Heavy Duty Ducting Package: $1,290.00
- ST – Service Engineer for Start-Up and On-site Training. Plus travel expenses: $POR
