DAKE 25H 25 Ton Hand-Operated Hydraulic Press


The DAKE 25H hand operated hydraulic press offers 25 tons of pressing power.
It features 5-3/16 inches between the table channels, 39 inch maximum ram to table, and is 76 inches tall.
Made in the USA

Dake Presses and Saws


  • Our most popular selling hand operated hydraulic press model. These hand operated hydraulic presses feature rapid ram return, by-pass hole, and rapid screw traverse of ram, along with an adjustable table, and movable work head.
  • Hand operation for economical performance
  • By-pass hole prevents excessive ram extension.
  • Rapid screw traverse of ram permits quick, easy movement of the ram by means of a convenient handwheel.
  • Rapid ram return starts as soon as release valve is opened and may be stopped at any point by closing the valve.
  • Adjustable table permits easy vertical movement by means of self-locking hoist.
  • Movable workhead is roller mounted on ball bearings for off-center positioning (except 25H)


  • Frame
  • Workhead
  • Two forged steel V-blocks
  • Two forged steel table plates (25 ton model has two combination table plates with V-blocks)
  • Flat ram nose
  • V-ram nose (N/A on 25 ton model)
  • Pressure gauge
  • Self-locking table hoist

Capacity: 25 Tons
Width Between Uprights: 33-1/2 in.
Width Between Table Channels: 5-3/16 in.
Minimum Ram to Table: 4 in.
Maximum Ram to Table: 39 in.
Ram Travel: 5 in.
Horizontal Workhead Travel: n/a
Screw Travel: 5 in.
Operation: Hand
Ram advance speed: n/a
Pressing speed: n/a
RPM: n/a
Air Pressure: n/a
Horsepower: n/a
Voltage: n/a
Footprint: 42-1/2 x 30 in.
Base: 42-1/2 x 30 in.
Height: 76 in.
Weight: 460 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.

Additional information

Weight 460 lbs
Dimensions 42.5 × 30 × 76 in



Since 1887, Dake has been a trusted manufacturer of hydraulic and arbor presses,  bandsaws, cold saws, drill presses, and laboratory presses.
Dake Presses and Saws