Description
- Made in Taiwan
- Bed:
• MEEHANTIE CAST IRON, VIBRATION STRESSES RELIEVED.
• INDUCTION HARDENED (HS70 DEGREE) AND PRECISION GROUND.
• PRECISION HAND SCRAPED REMOVABLE GAP.
• FOOT BRAKE - Universal Gear Box:
• OIL BATH LUBRICATION.
• HEAT-TREATED GEARS.
• INCH/METRIC/MODULE/DIAMETRICAL THREADS.
• OUTPUT SHAFT IS DESIGNED WITH SAFETY PIN - Apron and Saddle:
• MANUAL AND AUTOMATIC LUBRICATION SYSTEM-OIL DISTRIBUTOR ADJUSTED TO LUBRICATING BED WAYS AND CROSS SIDE OR BOTH.
• OVERLOAD PROTECTION DEVICE.
• CROSS SLIDE IS HARDENED AND PRECISION GROUND.
• CROSS SLIDE SCREWS ARE HARDENED AND OIL BATHED.
• FORWARD-OFF-REVERSE LEVER.
• TOP AND SADDLE SLIDE LOCKING SYSTEM.
• T-SLOT COMPOUND FOR AMERICA AREA - Spindle:
• SUPPORTED BY 3 PRECISION P-GRADE TAPER ROLLER BEARINGS.
• DYNAMICALLY BALANCED, HARDENED AND PRECISION GROUND.
• ACH-2200 SERIES-D1-11 SPINDLE NOSE, SPINDLE HOLE 4.09″ - Headstock:
• ALL GEARS MADE BY CHROMIUM MOLYBDENUM STEEL AND SEGMENTATION TREATED AND PRECISION GROUND.
• FORCED LUBRICATION SYSTEM - Tailstock:
• QUILL MADE BY CHROMIUM MOLYBDENUM STEEL WITH SEGMENTATION AND PRECISION GROUND.
• ACH-2200 SERIES-DIAMETER TAIL STOCK SPINDLE 2.935″ AND SPINDLE TRAVEL 7″
• TWO SPEED WITH 1:1 AND 1/4:1 CHANGE FEEDS.
STANDARD EQUIPMENT:
- 15″ 3-Jaw Chuck
- Steady Rest (1-3/5″ ~ 10″)
- Coolant System
- Halogen Light
- 4 Way Tool Holder
- Full Length Splash Guard
- Removable Gap
OPTIONAL MODELS:
2690ACH 26″x90″ Precision Gap Bed Engine Lathe: $41,500.00
26120ACH 26″x120″ Precision Gap Bed Engine Lathe: $49,500.00
26160ACH 26″x160″ Precision Gap Bed Engine Lathe: $57,500.00
SPECIFICATIONS:
MODEL
|
2690ACH
|
26120ACH
|
26160ACH
|
|
CAPACITY
|
Swing Over Bed:
|
26″
|
||
Swing In Gap:
|
35-1/8″
|
|||
Swing Over Cross Slide:
|
17-1/2″
|
|||
Distance Between Centers
|
90″
|
120″
|
160″
|
|
Width of Bed
|
15-3/4″
|
|||
HEADSTOCK
|
Spindle Nose Type:
|
D1-11
|
||
Spindle Bore
|
4-1/16″
|
|||
Taper of Spindle
|
MT NO.7 x MT NO.5
|
|||
Spindle Speeds
|
Steps: 12 step
|
|||
Range: 13 ~ 1,200 RPM
|
||||
CARRIAGE
|
Cross Slide Travel:
|
15-3/4″
|
||
Compound Slide Travel
|
9-1/2″>
|
|||
THREAD & FEEDS
|
Inch threads
|
2~72 TPI
|
||
Metric threads
|
0.2 ~ 14 mm
|
|||
Longitudinal Feeds
|
0.0012 ~ 0.039″ /rev
|
|||
Cross Feeds
|
0.0004 ~ 0.0117″ /rev
|
|||
TAILSTOCK
|
Quill Diameter:
|
2.935″
|
||
Quill Travel:
|
7″
|
|||
Taper Center
|
MT No. 5
|
|||
POWER
|
Spindle Drive Motor:
|
15 HP/4P
|
||
Voltage
|
230/460V AC / 3 PH
|
|||
MEASUREMENT
|
Weight
|
7,200 lbs.
|
7,700 lbs.
|
8,450 lbs.
|
Dimensions
|
146″ x 48″ x 60″
|
178″ x 48″ x 60″
|
217″ x 48″ x 60″
|
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
OPTIONAL ITEMS:
- Steady Rest (1-3/5” ~ 10”)………………. $ 3,250.00
- Large Steady Rest (7-1/2″ ~ 15″) ………. $ 3,500.00
- 7″ Follow Rest ………………………………… $ 700.00
- 20″ Face Plate ……………………………….. $ 1,000.00
- Taper Attachment …………………………… $ 4,000.00
- Taper Attachment Install…………………. $ 425.00
- Newall Digital Read-Out-14″ X 60″ DP700…………………………….. $ 3,250.00
- Newall Digital Read-Out-14″ X 60” NMS300….……………….…… $ 1,650.00
- Newall Digital Read-Out-14″ X 88″ DP700…………………………….. $ 4,000.00
- Newall Digital Read-Out-14″ X 88″ NMS300……….……….……… $ 1,900.00
- Newall Digital Read-Out-14″ X 120″ DP700…………………………… $ 5,200.00
- Newall Digital Read-Out-14″ X 120” NMS300……….…….……….. $ 2,450.00
- Newall Digital Read-Out-14″ X 160″ DP700…………………………… $ 6,500.00
- Acu-Rite Digital Read-Out-16″ X 60″ 203……………………………… $ 3,500.00
- Acu-Rite Digital Read-Out-16″ X 90″ 203……………………………… $ 4,400.00
- Acu-Rite Digital Read-Out-16″ X 120″ 203……………………………. $ 5,400.00
- Acu-Rite Digital Read-Out-16″ X 60” 303.…………………………… $ 3,950.00
- Acu-Rite Digital Read-Out-16″ X 90” 303.……………………………. $ 4,850.00
- Acu-Rite Digital Read-Out-16″ X 120” 303.………………………….. $ 5,750.00
- Sony or Fagor or Mitutoyo Digital Read-Out…………………………. $ P.O.R.
- D.R.O. Installation……………………………………………………………. $ 375.00
- Aloris Tool Post Set (CA) 5pc…..…………………………………. $ P.O.R.
- Import Quick Change Tool Holder………………………………………. $ 750.00
- Live Center MT 5…………………………………………………………. $ 500.00
- 20” 4 Jaw Chuck (China)………………………………………………… $ 2,500.00
- 16” 4 Jaw Chuck……………………………………………………………. $ 1,750.00
- Micro Carriage Stop ……………………………………………………….. $ 400.00
- 4 Position Carriage Stop………………..…………………………. $ 500.00