SPECIFICATIONS:
*Call Sierra Victor Industries at (386) 304-3720 for more information

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post BAILEIGH B-CART-W Heavy Duty Welding Cart appeared first on Sheet Metal Machines.

Solid State Time & Weld Relay

• • Assures high quality welds each and every time.

High Capacity Transformer

• • Allows for continuous use for jobs of any size, including 3” Liner.

Weld Rate

• • 15-20 pins per minute continuously. Faster rates are possible based on the operator.

Cables

• • Gun – 15 feet, #4/0 weld cable adn #16/3 control cable.
  • Ground – 5 feet, #4/0 weld cable terminating in a spring loaded, copper alloy clamp.

Capability

• • Welding 1/2″ – 4″ weld pins to 26 – 16 gauge sheet metal.

PowerPoint Weld Pins

• • For peak performance, it is highly recommended using Gripnail’s wide range of PowerPoint weld pins. Each point is precisely formed to provide optimum weld current.
  • A PowerPoint Weld Pin permanently attaches insulation to galvanized steel in the fabrication of HVAC duct work and withstands a tensile pull of at least 120 pounds from sheet metal.

High Capacity Transformer

• • The PowerPinner 7250 was completely designed around the same high capacity transformer that can be found in Gripnail’s floor model line of PowerPinner welders. This delivers the same level of power and quality welds commonly seen in much larger machines.

Pistol Grip Weld Gun

• • The weld gun has a pistol grip style handle with a trigger guard and switch for a more ergonomic working environment. Welding current is not available at the gun until the weld pin contacts the sheet metal and the trigger is pulled.

Chamfered & Recessed Weld Tip

• • The magnetic weld tip is specially designed with a chamfered edge and recessed center to optimize the weld quality of PowerPoint weld pins. The unique characteristics of the PowerPoint weld pin’s noninvasive protruding shank captures and centers the weld pin to ensure consistent loading, while the beveled retaining cap prevents it from shifting off the weld tip when the pin is being set through the insulation. Although the PowerPinner 7250 works with a variety of weld pins, our PowerPoint’s precision manufacturing process assures a trouble free operation with the best quality weld possible.

Low Maintenance

• • As a result of the PowerPinner 7250 solid state circuitry and design, it requires less maintenance.

Simplified Controls

• • A well defined Weld Time control is provided for simple adjustment when changing weld pin sizes or sheet metal gauge on different insulation jobs.
    An easy to read, LED light clearly indicates the power status of the welder, while a different LED provides the welding operation status.
    To activate the welder, simply pull the trigger on the Pistol Grip and the welder will engage.
  • Safety – A high visibility power switch comes standard with a simple to use Lockout/Tagout feature.

SPECIFICATIONS:
Input Voltage: 190-240 VAC 60Hz, 1-Phase, 35 Amp
Electrical Connection: 10 ft, 8/3 Power Cord
Length: 14 in.
Width: 18 in.
Height: 13 in.
Gun Type: Pistol Grip
List Weight: 120 lbs.
Shipping Weight: 154 lbs.
Freight Class: 70

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post GRIP NAIL PowerPinner 7250 Heavy Duty Benchtop Duct Lining Hand Welder appeared first on Sheet Metal Machines.

Cycle Time

• • At 83 cycles per minute, the new PLC reaches coil line speeds.*

Continuous Fire

• • Depressing the ergonomic foot pedal while the Continuous Fire switch is on allows the operator to continuously weld pins without having to lift their foot off the pedal.

Single Weld Control

• • Simply set the machine for the gauge you want based on pin size and thickness of sheet metal. Weld and dwell time are calculated by the PLC.

High Output Transformer

• • Produces the strongest possible weld for 1/2″ all the way to full 2″ pins, fastened to 16-26 gauge sheet metal.
• * Numbers based on Weld Setting 1

PowerPoint Weld Pins:

• • For peak performance, it is highly recommended using Gripnail’s wide range of PowerPoint Weld Pins. Each point is precisely formed to provide optimum electrical resistance.
  • A PowerPoint Weld Pin permanently attaches insulation to galvanized steel in the fabrication of HVAC duct work and withstands a tensile pull of at least 120 pounds in sheet metal.

Programmable Logic Controller:

• • Inside the control box is a PLC, which has been programmed here in the USA, to coordinate welding and machine functions resulting in the fastest and most perfected weld every time. Machine operators only need to increase the weld setting for longer pins or thicker sheet metal, and the PLC will set the dwell time and coordinate the feed cycle. Minimal operator training is needed for this machine which means maximum flexibility.
• The PLC allows for minimum operator intervention during setup or job changes, all while producing maximum performance at industry leading speeds.

Chamfered & Recessed Weld Tip:

• • The magnetic upper weld tip is specially designed with a chamfered edge and recessed center to optimize the weld quality of PowerPoint weld pins. The unique characteristics of the PowerPoint weld pin’s noninvasive protruding shank captures and centers the weld pin to ensure consistent loading while the beveled retaining cap prevents it from shifting off the weld tip when the pin is being set though the insulation. Although the PowerPinner 7005HS works with a variety of weld pins, using our PowerPoint’s precision manufacturing process assures a trouble free operation with the best quality weld possible.

Quick Change Weld Tips:

• • Upper and lower weld tips cna be replaced in seconds. The lower weld tip is purposefully off centered so that once an area is worn down, the operator can make a small rotational adjustment and use a new part of the weld tip for extended product life.

Double-Acting Load Cylinder:

• • To keep up with the intense speeds of the PLC, double-acting load cylinders are standard on every machine. This ensures that each Weld Pin is loaded at maximum speeds without the danger of a component collision potentially possible with single-acting cylinders, which may lag due to its dependence on spring tension.

Simplified Controls

• • A single weld-setting switch controls the weld time while the PLC optimizes the dwell times. The other controls are a “continuous fire” on/off switch and a feeder bowl speed control. The PowerPinner 7005HS also comes with a LED voltage readout which informs the operator of a low voltage situation which can affect the integrity of the weld.
  • Safety – A high visibility power switch comes standard with a simple to use Lockout/Tackout feature.

NEMA Type 12 Electrical Enclosures

• • To protect vital components form the rigor of most manufacturing environments, every electrical enclosure is rated to the National Electrical Manufacturers Association’s Type 12 standards. This protects your investment from dust, debris, adhesives remnants and oil vapor form reaching operation critical components.

Large Capacity Feeder Bowl

• • The large capacity feeder bowl can accommodate a full range of pins from half inch to 2 inch and operators cna control the pin feed speed on the control box.

SPECIFICATIONS:
Input Voltage: 190-240 VAC 60Hz, 1-Phase, 35 Amp
Air Requirements: 2-3 CFM, 80 PSI
Working Depth: 63 in.
Anvil Height: 36 in.
Total Depth: 68 in.
Width: 32 in.
List Weight: 523 lbs.
Shipping Weight: 609 lbs.
Freight Class: 70

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post GRIP NAIL PowerPinner 7005HS High Speed Fixed Head Duct Lining Welder appeared first on Sheet Metal Machines.

SPECIFICATIONS:
Capacity: 25 KVA or 35 KVA Capacity: 2 pcs 14 gauge
Voltage: 220 Volts Single Phase 80 Amp, 440 Volts Single Phase 40 Amp (must specify)
Recirculator: None, ProCool II Coolant Recirculator
Dimensions: 40″ x 12″ x 50″
Weight: 300 lbs. (425 lbs. crated)

OPTIONAL ITEMS:
Optional ProCool II coolant recirculator available (call for price)

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post PROFAB 25KVA Air Operated Fully Automatic Spot Welder appeared first on Sheet Metal Machines.

EQUIPPED WITH:

• Three Year Limited Warranty*
• Patented Safety Feature. (Patent Number 7114436)
• Simple Patented Design For Easy Gauge Adjustments.
• Standard BTM Tooling.
• laser system at no charge

SPECIFICATIONS:
Throat: 26″
Material Thickness: 14 gauge
Opening Height: 14
Dimensions: 32 x 48 inch foot print
Steel Frame/Shipping Weight: 1,690 lbs.
Stand: Included

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 3 YEAR – Parts

OPTIONAL ITEMS:

• Die $265
• Punch $110
• Die Leaf (EACH) $43
• Die Leaf Band $9
• Stripper $57
• Die Guard $57
• Die C & Punch C 28-20 gauge capacity – Call for Price
• Die D & Punch D 22-18 gauge capacity – Call for Price
• Die E & Punch E 18-14 gauge capacity – Call for Price

The post MID-RIVER MACHINERY AC-3-26 26 in. Air Cam Clinching Machine appeared first on Sheet Metal Machines.

EQUIPPED WITH:

• Three Year Limited Warranty*
• Patented Safety Feature. (Patent Number 7114436)
• Simple Patented Design For Easy Gauge Adjustments.
• Standard BTM Tooling.
• laser system at no charge

SPECIFICATIONS:
Throat: 14″
Material Thickness: 14 gauge
Dimensions: 32 x 36 inch foot print
Steel Frame/Shipping Weight: 1,000 lbs.
Stand: Included

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 3 YEAR – Parts

OPTIONAL ITEMS:

• Die $265
• Punch $110
• Die Leaf (EACH) $43
• Die Leaf Band $9
• Stripper $57
• Die Guard $57
• Die C & Punch C 28-20 gauge capacity – Call for Price
• Die D & Punch D 22-18 gauge capacity – Call for Price
• Die E & Punch E 18-14 gauge capacity – Call for Price

The post MID-RIVER MACHINERY AC-3-14 14 in. Air Cam Clinching Machine appeared first on Sheet Metal Machines.

ACCESSORIES INCLUDED:

• Indexable Insert: 2 pcs. (Installed)
• Indexable Insert Set Screw: 2 pcs. (Installed)
• Indexable Insert Set Screw: 2 pcs. (Extra Supply)
• 2mm Allen Wrench
• Torx 6 (T-6F) Wrench for Insert Set Screw
• Threaded Adapter PT 1/4″ x NPT 1/4″

SPECIFICATIONS:
Air Pressure: 85 PSI
Air Consumption: 5.3 CFM
No Load Speed: 28,000 RPM
Chamfering Capacity (Mild Steel): Up to .039″ (1mm) Chamfer
Chamfering Capacity (Stainless Steel): Up to .020″ (0.5mm) Chamfer
Chamfer Angle: 45 Degrees
Minimum Plate Thickness: .059″ (1.5mm)
Maximum chamfer capacity is reduced: to 0.5mm when plate thickness is 1.5mm
Minimum Radius: .118″ (3mm Radius)
Minimum Hole Diameter: .268″ (6.8mm) Diameter Hole
Weight: 1.1 lbs.

BEVEL ANGLE, WIDTH AND RADIUS:

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Limited

OPTIONAL ITEMS:
TV7A030: Cutting Tip for CB-01: (2pcs./set) for Mild Steel (1mm capacity)
TV7A031: Cutting Tip for CB-01: (2pcs./set) for Stainless Steel (0.5mm capacity)
TB09140: Guide Plate 78 Assembly
TB09143: Plate Assembly for Straight Edge Use (Must use with TB09140 Guide Plate 78 Assembly)

The post NITTO KOHKI CB-01 .039 in. Pneumatic Circuit Beveler appeared first on Sheet Metal Machines.

ACCESSORIES INCLUDED:

• Threaded Adapter PT3/8” x NPT 3/8”
• 3 mm Allen Wrench
• 4 mm Allen Wrench
• Straight Cutting Tip
• (2) Hex. Nut M8
• (2) Hex. Socket Set Screw 8 mm x 25 mm
• Torx 15 (T-15) Spanner Wrench

SPECIFICATIONS:
Air Pressure: 85 PSI
Air Consumption: 31.8 CFM
Chamfering Capacity (Mild Steel): Up to 5/16” (7 mm) Chamfer or 1/16” (2 mm), 1/8” (3 mm), 5/32” (4 mm) Radius
Chamfering Capacity (Stainless Steel): Up to 1/8” (3 mm) Chamfer or 1/16” (2 mm), 1/8” (3 mm), 5/32” (4 mm) Radius
Chamfer Angle: 15 – 45 Degrees
Weight: 6.4 lbs. (2.9 kg)

BEVEL ANGLE, WIDTH AND RADIUS:

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Limited

OPTIONAL ITEMS:
TV7A019: Straight Tip (2 pcs./set)
TV7A020: 1/16” (2 mm) Radius Tip (2 pcs./set)
TV7A021: 1/8” (3 mm ) Radius Tip (2 pcs./set)
TV7A022: 5/32” (4 mm) Radius Tip (2 pcs./set)

The post NITTO KOHKI AMB-0307 5/16 in. Pneumatic Mini Beveler appeared first on Sheet Metal Machines.

ACCESSORIES INCLUDED:

• 4mm Allen Wrench
• 5mm Allen Wrench
• 6mm Allen Wrench
• Hook Spanner 25-28
• Spanner 24mm x 27mm
• 3mm T Wrench
• Roller Bracket Assembly
• 2 Sets of Cutting tips, comes with one set mounted (12 pieces/set)

SPECIFICATIONS:
Power Supply: 115V AC, 50/60 Hz
Rated Power Consumption: 910 W
Rated Current: 10.5 A
No Load Speed: 3,340 RPM
Chamfering Capacity (Mild Steel): 5/8″ (15mm) Depth at 45° Angle
Chamfer Angle: 15° – 45°
Power Cord: 13.1 feet (4 meters)
Weight: 33 lbs.

CHAMFER ANGLE AND WIDTH:

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Limited

OPTIONAL ITEMS: CALL FOR PRICE
TA9A093: Premium grade cutting tips (12 pcs./set)
TA9A728: Pipe and Tube Beveling Attachment Capacity 7-7/8″ to 32″ inches O.D.

The post NITTO KOHKI HB-15B 5/8 in. Electric Hand Beveler appeared first on Sheet Metal Machines.

SPECIFICATIONS:
Capacity: 25 KVA Capacity: 2 pcs 14 gauge
Voltage: 220 Volts Single Phase 80 Amp, 440 Volts Single Phase 40 Amp (must specify)
Recirculator: None, ProCool II Coolant Recirculator
Dimensions: 40″ x 12″ x 50″
Weight: 300 lbs. (425 lbs. crated)

OPTIONAL ITEMS:
Optional ProCool II coolant recirculator available (call for price)

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post PROFAB 25KVA Air Operated Manual Foot Operated Spot Welder appeared first on Sheet Metal Machines.