• MADE IN USA
• TENNSMITH’S Heavy-duty hand brakes are designed and built for long service and accurate bending. Welded steel plate construction and heavy truss rods and braces provide strength and durability.
• With much more substantial steel side plates than other domestically made units, these brakes have teh rigidity required for upper beam adjustment without the use of wrenches.
• Equipped with thrust bearings, the upper leaf adjustment screws permit quick, accurate alignment for different material thickness or radii.
• Other adjustment features include:
  • Leveling screws and lock nuts on the pedestals
  • Jack screws and tensioner bolts on the apron
  • Truss rods on the apron, base and upper beam
  • Fully adjustable counter balances to facilitate the bending process
  • Replaceable nose bar and apron inserts
• Removable apron angle and insert permit 1/4-inch reverse bends in lighter material
• Bored in line to ensure perfect alignment, the pivot points are fitted with oil impregnated bearings. The hinge pins are high-tensile, alloy steel.
• Ductile steel clamp handles, heavy yokes, grease fittings and an apron stop rod complement the many other fine features of these heavy-duty brakes

SPECIFICATIONS:

The post TENNSMITH HB97-18 8ft x 18 ga. Heavy Duty Hand Brake appeared first on Sheet Metal Machines.

• MADE IN USA
• TENNSMITH’S Heavy-duty hand brakes are designed and built for long service and accurate bending. Welded steel plate construction and heavy truss rods and braces provide strength and durability.
• With much more substantial steel side plates than other domestically made units, these brakes have teh rigidity required for upper beam adjustment without the use of wrenches.
• Equipped with thrust bearings, the upper leaf adjustment screws permit quick, accurate alignment for different material thickness or radii.
• Other adjustment features include:
  • Leveling screws and lock nuts on the pedestals
  • Jack screws and tensioner bolts on the apron
  • Truss rods on the apron, base and upper beam
  • Fully adjustable counter balances to facilitate the bending process
  • Replaceable nose bar and apron inserts
• Removable apron angle and insert permit 1/4-inch reverse bends in lighter material
• Bored in line to ensure perfect alignment, the pivot points are fitted with oil impregnated bearings. The hinge pins are high-tensile, alloy steel.
• Ductile steel clamp handles, heavy yokes, grease fittings and an apron stop rod complement the many other fine features of these heavy-duty brakes

SPECIFICATIONS:

The post TENNSMITH HB121-16 10ft x 16 ga. Heavy Duty Hand Brake appeared first on Sheet Metal Machines.

• • ESA S929 CNC Control w/ 10″ High Resolution Screen with Offline Programming Capability
  • Servo X and Y Axes – Faster, More Accurate, Quieter
  • Linear Encoder – More Precise; Allows for top dead center and muting point to be programmed at
    CNC control
  • Linear Guide Rail on Back Gauge – Helps keep the back gauge aligned
  • Torsion Bar Design for Parallelism
  • Heavy Duty Forged Hydraulic Cylinders
  • Adjustable Dwell Timing
  • Light Curtains on Front and Photo-Electric Eyes on Rear of Machine for Safety
  • All 13′ Press Brakes Come with Auto-Crowning as a Standard Feature; Can be added to other models. See optional accessories.
  • Goose-neck Punch and Multi-Opening Die for up to 90° Forming
  • Space Between Ram Tool Clamps – Allows for deep box bending
  • Our standard ram clamps and optional quick release ram clamps will hold all punch tangs.
  • Our bed has a slot for the standard die tang shown in photos. Also, bed tooling without tang can be held with the included capture clamps.
  • Our standard ram clamp for all punch tangs shown in photos have two allen- head cap screws to secure tools.
  • Our optional ram clamps for all punch tangs are shown in photos. Lever action allows for quick tool change.
  • Special Note: The goose-neck punch and multi-opening die included are general purpose tools. Precision tooling should be purchased to meet your specific needs. There is no warranty on this tooling.
  • The Gooseneck punch tool sections included, are full length of ram. Multi-opening V-Die for up to 90 degree forming included, full length of bed. Die lifting rings included.

SPECIFICATIONS:

OPTIONAL ITEMS:

• Upgrade to Fiessler Akas II Laser Guarding (Substitute for Sick deTec 4) … $5,995.00
• Add Third Axis (Back Gauge Height controlled from operator panel.) …. $4,995.00
• CNC Controlled Mechanical Auto Crown …………………………………………….. $6,495.00
• Upgrade to Cam-Lever Quick Action Ram Clamps …………………………….. $6,495.00
• Training in our Memphis, TN Facility ……………………………………………………. $750.00
• Training at customer site, more than 300 miles from Memphis: (If outside continental USA, please call for quote) …. $4,995.00

The post U.S. INDUSTRIAL USHB390-10C 390 Ton x 10ft CNC Hydraulic Press Brake appeared first on Sheet Metal Machines.

• • ESA S929 CNC Control w/ 10″ High Resolution Screen with Offline Programming Capability
  • Servo X and Y Axes – Faster, More Accurate, Quieter
  • Linear Encoder – More Precise; Allows for top dead center and muting point to be programmed at
    CNC control
  • Linear Guide Rail on Back Gauge – Helps keep the back gauge aligned
  • Torsion Bar Design for Parallelism
  • Heavy Duty Forged Hydraulic Cylinders
  • Adjustable Dwell Timing
  • Light Curtains on Front and Photo-Electric Eyes on Rear of Machine for Safety
  • All 13′ Press Brakes Come with Auto-Crowning as a Standard Feature; Can be added to other models. See optional accessories.
  • Goose-neck Punch and Multi-Opening Die for up to 90° Forming
  • Space Between Ram Tool Clamps – Allows for deep box bending
  • Our standard ram clamps and optional quick release ram clamps will hold all punch tangs.
  • Our bed has a slot for the standard die tang shown in photos. Also, bed tooling without tang can be held with the included capture clamps.
  • Our standard ram clamp for all punch tangs shown in photos have two allen- head cap screws to secure tools.
  • Our optional ram clamps for all punch tangs are shown in photos. Lever action allows for quick tool change.
  • Special Note: The goose-neck punch and multi-opening die included are general purpose tools. Precision tooling should be purchased to meet your specific needs. There is no warranty on this tooling.
  • The Gooseneck punch tool sections included, are full length of ram. Multi-opening V-Die for up to 90 degree forming included, full length of bed. Die lifting rings included.

EQUIPPED WITH:

• CNC Controlled Mechanical Auto Crown

SPECIFICATIONS:

*Due to changes in economic conditions, US Industrial Machines are subject to a tariff surcharge.
Please contact our sales team to verify pricing.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

Machine Photo May Include Optional Equipment
Product image is only a representation, actual product appearance may differ slightly

OPTIONAL ITEMS:

• Upgrade to Fiessler Akas II Laser Guarding (Substitute for Sick deTec 4) … $5,995.00
• Add Third Axis (Back Gauge Height controlled from operator panel.) …. $4,995.00
• Upgrade to Cam-Lever Quick Action Ram Clamps …………………………….. $6,495.00
• Training in our Memphis, TN Facility ……………………………………………………. $750.00
• Training at customer site, more than 300 miles from Memphis: (If outside continental USA, please call for quote) ….. $4,995.00

The post U.S. INDUSTRIAL USHB275-13C 275 Ton x 13ft CNC Hydraulic Press Brake appeared first on Sheet Metal Machines.

• • ESA S929 CNC Control w/ 10″ High Resolution Screen with Offline Programming Capability
  • Servo X and Y Axes – Faster, More Accurate, Quieter
  • Linear Encoder – More Precise; Allows for top dead center and muting point to be programmed at
    CNC control
  • Linear Guide Rail on Back Gauge – Helps keep the back gauge aligned
  • Torsion Bar Design for Parallelism
  • Heavy Duty Forged Hydraulic Cylinders
  • Adjustable Dwell Timing
  • Light Curtains on Front and Photo-Electric Eyes on Rear of Machine for Safety
  • All 13′ Press Brakes Come with Auto-Crowning as a Standard Feature; Can be added to other models. See optional accessories.
  • Goose-neck Punch and Multi-Opening Die for up to 90° Forming
  • Space Between Ram Tool Clamps – Allows for deep box bending
  • Our standard ram clamps and optional quick release ram clamps will hold all punch tangs.
  • Our bed has a slot for the standard die tang shown in photos. Also, bed tooling without tang can be held with the included capture clamps.
  • Our standard ram clamp for all punch tangs shown in photos have two allen- head cap screws to secure tools.
  • Our optional ram clamps for all punch tangs are shown in photos. Lever action allows for quick tool change.
  • Special Note: The goose-neck punch and multi-opening die included are general purpose tools. Precision tooling should be purchased to meet your specific needs. There is no warranty on this tooling.
  • The Gooseneck punch tool sections included, are full length of ram. Multi-opening V-Die for up to 90 degree forming included, full length of bed. Die lifting rings included.

SPECIFICATIONS:

OPTIONAL ITEMS:

• Upgrade to Fiessler Akas II Laser Guarding (Substitute for Sick deTec 4) … $5,995.00
• Add Third Axis (Back Gauge Height controlled from operator panel.) …. $4,995.00
• CNC Controlled Mechanical Auto Crown …………………………………………….. $6,495.00
• Upgrade to Cam-Lever Quick Action Ram Clamps …………………………….. $6,495.00
• Training in our Memphis, TN Facility ……………………………………………………. $750.00
• Training at customer site, more than 300 miles from Memphis: (If outside continental USA, please call for quote) …. $4,995.00

The post U.S. INDUSTRIAL USHB275-10C 275 Ton x 10 ft CNC Hydraulic Press Brake appeared first on Sheet Metal Machines.

• • ESA S929 CNC Control w/ 10″ High Resolution Screen with Offline Programming Capability
  • Servo X and Y Axes – Faster, More Accurate, Quieter
  • Linear Encoder – More Precise; Allows for top dead center and muting point to be programmed at
    CNC control
  • Linear Guide Rail on Back Gauge – Helps keep the back gauge aligned
  • Torsion Bar Design for Parallelism
  • Heavy Duty Forged Hydraulic Cylinders
  • Adjustable Dwell Timing
  • Light Curtains on Front and Photo-Electric Eyes on Rear of Machine for Safety
  • All 13′ Press Brakes Come with Auto-Crowning as a Standard Feature; Can be added to other models. See optional accessories.
  • Goose-neck Punch and Multi-Opening Die for up to 90° Forming
  • Space Between Ram Tool Clamps – Allows for deep box bending
  • Our standard ram clamps and optional quick release ram clamps will hold all punch tangs.
  • Our bed has a slot for the standard die tang shown in photos. Also, bed tooling without tang can be held with the included capture clamps.
  • Our standard ram clamp for all punch tangs shown in photos have two allen- head cap screws to secure tools.
  • Our optional ram clamps for all punch tangs are shown in photos. Lever action allows for quick tool change.
  • Special Note: The goose-neck punch and multi-opening die included are general purpose tools. Precision tooling should be purchased to meet your specific needs. There is no warranty on this tooling.
  • The Gooseneck punch tool sections included, are full length of ram. Multi-opening V-Die for up to 90 degree forming included, full length of bed. Die lifting rings included.

SPECIFICATIONS:

*Due to changes in economic conditions, US Industrial Machines are subject to a tariff surcharge.
Please contact our sales team to verify pricing.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

Machine Photo May Include Optional Equipment
Product image is only a representation, actual product appearance may differ slightly

OPTIONAL ITEMS:

• Upgrade to Fiessler Akas II Laser Guarding (Substitute for Sick deTec 4) … $5,995.00
• Add Third Axis (Back Gauge Height controlled from operator panel.) …. $4,995.00
• CNC Controlled Mechanical Auto Crown …………………………………………….. $6,495.00
• Upgrade to Cam-Lever Quick Action Ram Clamps …………………………….. $3,295.00
• Training in our Memphis, TN Facility ……………………………………………………. $750.00
• Training at customer site, more than 300 miles from Memphis: (If outside continental USA, please call for quote) ……………. $4,995.00

The post U.S. INDUSTRIAL USHB200-8C 200 Ton x 8ft CNC Hydraulic Press Brake appeared first on Sheet Metal Machines.

• • ESA S929 CNC Control w/ 10″ High Resolution Screen with Offline Programming Capability
  • Servo X and Y Axes – Faster, More Accurate, Quieter
  • Linear Encoder – More Precise; Allows for top dead center and muting point to be programmed at
    CNC control
  • Linear Guide Rail on Back Gauge – Helps keep the back gauge aligned
  • Torsion Bar Design for Parallelism
  • Heavy Duty Forged Hydraulic Cylinders
  • Adjustable Dwell Timing
  • Light Curtains on Front and Photo-Electric Eyes on Rear of Machine for Safety
  • All 13′ Press Brakes Come with Auto-Crowning as a Standard Feature; Can be added to other models. See optional accessories.
  • Goose-neck Punch and Multi-Opening Die for up to 90° Forming
  • Space Between Ram Tool Clamps – Allows for deep box bending
  • Our standard ram clamps and optional quick release ram clamps will hold all punch tangs.
  • Our bed has a slot for the standard die tang shown in photos. Also, bed tooling without tang can be held with the included capture clamps.
  • Our standard ram clamp for all punch tangs shown in photos have two allen- head cap screws to secure tools.
  • Our optional ram clamps for all punch tangs are shown in photos. Lever action allows for quick tool change.
  • Special Note: The goose-neck punch and multi-opening die included are general purpose tools. Precision tooling should be purchased to meet your specific needs. There is no warranty on this tooling.
  • The Gooseneck punch tool sections included, are full length of ram. Multi-opening V-Die for up to 90 degree forming included, full length of bed. Die lifting rings included.

SPECIFICATIONS:

OPTIONAL ITEMS:

• Upgrade to Fiessler Akas II Laser Guarding (Substitute for Sick deTec 4) … $5,995.00
• Add Third Axis (Back Gauge Height controlled from operator panel.) …. $4,995.00
• CNC Controlled Mechanical Auto Crown …………………………………………….. $6,495.00
• Upgrade to Cam-Lever Quick Action Ram Clamps …………………………….. $3,295.00
• Training in our Memphis, TN Facility ……………………………………………………. $750.00
• Training at customer site, more than 300 miles from Memphis: (If outside continental USA, please call for quote) …. $4,995.00

The post U.S. INDUSTRIAL USHB155-8C 155 Ton x 8ft CNC Hydraulic Press Brake appeared first on Sheet Metal Machines.

• • ESA S929 CNC Control w/ 10″ High Resolution Screen with Offline Programming Capability
  • Servo X and Y Axes – Faster, More Accurate, Quieter
  • Linear Encoder – More Precise; Allows for top dead center and muting point to be programmed at
    CNC control
  • Linear Guide Rail on Back Gauge – Helps keep the back gauge aligned
  • Torsion Bar Design for Parallelism
  • Heavy Duty Forged Hydraulic Cylinders
  • Adjustable Dwell Timing
  • Light Curtains on Front and Photo-Electric Eyes on Rear of Machine for Safety
  • All 13′ Press Brakes Come with Auto-Crowning as a Standard Feature; Can be added to other models. See optional accessories.
  • Goose-neck Punch and Multi-Opening Die for up to 90° Forming
  • Space Between Ram Tool Clamps – Allows for deep box bending
  • Our standard ram clamps and optional quick release ram clamps will hold all punch tangs.
  • Our bed has a slot for the standard die tang shown in photos. Also, bed tooling without tang can be held with the included capture clamps.
  • Our standard ram clamp for all punch tangs shown in photos have two allen- head cap screws to secure tools.
  • Our optional ram clamps for all punch tangs are shown in photos. Lever action allows for quick tool change.
  • Special Note: The goose-neck punch and multi-opening die included are general purpose tools. Precision tooling should be purchased to meet your specific needs. There is no warranty on this tooling.
  • The Gooseneck punch tool sections included, are full length of ram. Multi-opening V-Die for up to 90 degree forming included, full length of bed. Die lifting rings included.

SPECIFICATIONS:

*Due to changes in economic conditions, US Industrial Machines are subject to a tariff surcharge.
Please contact our sales team to verify pricing.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

Machine Photo May Include Optional Equipment
Product image is only a representation, actual product appearance may differ slightly

The post U.S. INDUSTRIAL USHB125-8C 125 Ton x 8ft CNC Hydraulic Press Brake appeared first on Sheet Metal Machines.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

Machine Photo May Include Optional Equipment
Product image is only a representation, actual product appearance may differ slightly

FEATURES

• GMC Machine Tools 8-foot Siding Brakes – Portable Roofing Sheet Metal Bender The GMC Machine Tools 8-foot Siding Brakes are a portable, foldable solution designed for precision sheet metal bending in roofing and HVAC applications. Built with a heavy welded snap steel stand for stability, this tool ensures durability and reliability on any job site. Featuring a cut-off shear for clean, accurate cuts, it’s the ideal companion for roofers and HVAC professionals seeking efficiency and precision. ISO 9001 certified and backed by a 1-year parts warranty, the siding brake is engineered to meet high industry standards. Portable, powerful, and practical—perfect for any professional’s toolkit.
• Portable type, foldable
• With snap steel stand
• Cut off shear
• Ideal for roofers, and HVAC shops
• May require 2 or more people
• ISO 9001 certified
• Heavy welded snap steel stand
• One year warranty for parts

The post GMC SBB822 8 ft x 22 Ga Siding Brakes – Roofing Sheet Metal Bender appeared first on Sheet Metal Machines.

• MADE IN USA
• Frame: The frame is of open throat design with mounting holes in feet. Drilled and tapped holes in feet allow for leveling of the machine.
• Bed: The machined flat surface is slotted full length to accommodate standard die holders, filter blocks, misc.
• Front & Back of Bed: The bed is machined down 4” on the front and 12” on the back to allow a flat surface for mounting various brackets, supports and gauges.
• Ram: The ram is constructed of solid steel slotted to accept standard dies. The clamping bar is sectional for positive clamping. The upper is machined up to 4” to allow a flat surface for mounting brackets and gauges.
• Ram Tilt Adjustment: The micrometer spindle is located on the right side end frame of machine, which allows for adjustment of the desired angle required up to ±0.500 inch. The micrometer allows the operator to return to a given setting, parallel to desired angle. By using the micrometer reading, the machine can return to previous position.
• Ram Level: The ram level is accomplished by two hydraulic systems, one for each cylinder, which keeps them parallel. The ram self-levels at the bottom of each stroke even if hydraulic system is out of adjustment.
• Hydraulic Cylinders: Direct acting hydraulic cylinders are one piece, double acting with self-aligning, hardened ball sockets.
• Accuracy: Parallelism is maintained at ±0.002 inch in low speed.
• Operating Controls:
  • 1. Pull to start. Push off. Light is on when in the “ON” position.
  • 2. Run/Jog switch. Run position for normal operation. Jog position for loading of tooling, maintenance and set-up.
    Up/Down buttons are used when in jog.
  • 3. 3 Position Foot Petal
    a. Ram up
    b. Ram hold
    c. Foot petal down. Ram down allows or jogging of ram down and holding. Emergency stop and emergency up buttons are located on a small pedestal that comes from the foot petal.
  • 4. Cycle time delay at bottom of stroke
• *When using top & bottom tools on a press brake, a forming system is created which requires analysis to determine the appropriate safeguarding for operator safety and protection.
• *It is the user’s responsibility to ensure that the point of operation is effective and all applicable safety requirements are met.
• Stroke Control (Optional): Control of strokes in accomplished by rotation of hand wheels, which read in thousandths of an inch and set the closed height. When the machine is 2 or 3 speed, the knob for setting the speed change point is located on right side for simple adjustments.
• Tonnage Control (Optional): Our machines are equipped with optional adjustable
  tonnage control to go from lower tonnage to rated tonnage of machine, as well as overload protection.
• Backgauge: A slide and clamp, 3 axis backgauge 24” is standard.
  • 1. Front operated manual backgauge, hand wheel with mechanical readout (0.01)
  • 2. Front operated power backgauge with LED readout (0.001)
    CNC backgauging and front gauging is optional.
• Front Support Arms (Optional): 24” support arms are “slide” type. Optional disappearing stops help to hold the material from sliding backward.
• Electrical System: The electrical systems meet NFPA 79 standards. All machines have
  disconnect switches, magnetic starters, 110/120v controls, 208-230/460v 3 phase, others optional.
• Motors: Our American made motors are rated for continuous duty, open drip.
• Lubrication: Grease zerks are standard. One shot lube or automatic lubrication is optional.
• Safety Features: Betenbender Hydraulic Press Brakes and Shears are built to meet ANSI B11.3 standards. Safety features of the Betenbender Press Brake include:
  • Emergency stop on pedestal
  • Emergency up on pedestal
  • Warning signs, safety markings and covers
  • Electronics meet NFPA 79 standards
  • 110/120v control
• Specifications are subject to change withoutnotice.
• Compliance with OSHA requirements is the legal responsibility of the user and is subject to local inspectors’ interpretation of existing standards.
• Betenbender Shears are built to meet ANSI B11.3 standards

STANDARD EQUIPMENT:

• Clamp Type Backgauge-Manual Adjustment X, Y, and Z
• Two Speed Ram
• Bottom Time Delay
• Three Position Foot Pedal
• Depth Stop w/Digital Readout
• Three Speed (95T and Larger)
• American Made Motors
• Hour Meter
• Nema Electrics
• All Hydraulic Fluids Included
• Disconnect Switch
• All Steel Construction
• NOTE: DIE RISERS NOT FURNISHED

SPECIFICATIONS:
Overall Width (in.): 56-1/2
Width of Bed (in.): 5-1/2
Width of Upper Machined Ram (in.): 3-3/4
Overall Height (in.): 111
Throat Depth (in.): 8
Open Height (in.): 16
Closed Height (in.): 10
Height of Bed (in.): 37
Overall Length (in.): 183
Distance Between Housing (in.): 150-1/2
Width of Upper Ram (in.): 4
Width of Upper End Plates (in.): 60
Press (IPM): 25
Rapid Approach (IPM): 50
Return to Open (IPM): 70
2-Speed Electric Shift: Std.
HP: 30 HP, 208/230v, 80amps or 460v, 40amps (specify)
Weight (lbs.): 35,000

**ESTIMATED WEIGHTS. The weight of your machine may vary from the estimated weight listed here.
Weights may vary according to options included.
> For specs on larger machines please call or email us and we will provide those for you.
> All dimensions are in inches unless otherwise noted. (To convert to centimeters multiply by 2.54)
> Engineering data and dimensions are subject to change without notice due to continuing product development.
> Foundation plans are available upon request.
> Die Blocks are not furnished.
> To convert Horsepower to KW, multiply by 0.746

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS:

• Factory Start Up by Base Service Technician …… $1,250.00 per day plus expenses
• *24″ Support Arms “Slide” Type W/T-Slots …………………… $1,200.00 pair
• *Keylock Switch ……………………………………………………………. $300.00
• *Light Curtain ……………………………………………………………….. $7,500.00
• Manual Front Reading Backgauge (24”) with Mechanical Readout …. $CALL
• *One Shot Lubrication …………………………………………………. $1,100.00
• *Operator Station Palm Control …………………………………… $1,900.00
• *Variable Tonnage Control ………………………………………….. $1,550.00
• *Work Light ………………………………………………………………….. $450.00
• 208v Single Phase …………………………. $CALL
• Additional Foot Pedal with Keylock ……………………………… $CALL
• Air Lift (Recommended for 4/Way Dies ……………………….. $CALL
• Angle Brackets (Plates) for Bottom (4″x4″) 18″ Shorter than Bed ……. $300.00 per foot
• Angle Brackets (Plates) for Top (4″x4″) 18″ Shorter than Bed ……… $300.00 per foot
• Automatic Lubrication ………………………………………………….. $3,100.00 each
• Bed Machining Angle Brackets ……………………………………. $1,900.00
• Bolt/Shim Kit for Leveling  ……………………………………….. $450.00
• CNC Backgauge ……………………………. $CALL
• CNC Ram Stop ……………………………… $CALL
• Crating Charge (Not an Export Crate) Still Requires Tarping ….. P.O.R.
• Die Riser ……………………………………………………………… P.O.R.
• Die Rollover Bars (Recommended for 4/Way Dies) ….. $250.00
• Disappearing Stops (Support Arms) ……………………….. $200.00 each
• Dove Tails …………………………………….. $CALL
• Dual Calibration …………………………… $CALL
• Extended Support Arms (each) ………………………………… $60.00 per foot
• Extra Length on Backgauge ……………………………………… $CALL
• Extra Foot Pedal w/Keylock Switch …………………………… $1,000.00
• Increase Stroke Length ……………………………………………. P.O.R.
• Increase Throat Gap or Increase Open Height
  • 50, 70, 95 Ton ………….. $1,000.00 per inch
  • 120, 160, 190 Ton ……. $1,800.00 per inch
  • 240 Ton ……………………. $2,000.00 per inch
• Micrometer Precision Gauge Unit (2 Required) ……. $CALL
• Oil Cooler (Kidney Loop System) ……………………………… $7,500.00
• Palm Buttons/Foot Control System (Hand buttons to preset height, stop and hold, foot to continue to shut height) …………………………………………$3,100.00
• Power Front Reading Backgauge with 5 Station NC “GO-TO” Positioner on Pendant … $CALL
• Power Ram Adjustment with 5 Station NC “GO-TO” Positioner on Pendant …. $CALL
• Ram Machining ………………………………….. $1,900.00
• Ram Stop Control (1/4″ above die) ………….. P.O.R.
• Special Application Tooling ………….. $CALL
• Special Paint Colors …………………….. P.O.R.
• T-Slots ………………………………………….. $300.00 per foot
• BACKGAUGES AND RAM CONTROL:
  • *Manual Front Reading Backgauge (24″) w/Mechanical Readout ….. $3,500.00
  • Power Front Reading Backgauge w/5 Station NC “Go To” Positioner on Pendant …… $5,500.00
  • Power Ram Adjustment w/5 Station NC “Go To” Positioner on Pendant ……. $2,500.00
  • Extra Length on Backgauge ……………………….. $1,000.00
  • CNC Backgauge …………………………………………. P.O.R.

Rigging, Lagging, Leveling and Electrical Hook Up is Customers Responsibility
ASK ABOUT OPTIONS NOT LISTED.
ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE.
NOTE: DIE RISERS NOT FURNISHED
*RECOMMENDED OPTIONS

The post BETENBENDER 14ft x 240 Ton Hydraulic Press Brake | Model 14-240 appeared first on Sheet Metal Machines.