roll formers Archives - Sheet Metal Machines

TIN KNOCKER TK S&Drive 22 ga. Rollformer

lt2@sierravictor.com — Mon, 12 Feb 2024 16:21:19 +0000

The perfect machine to make metal into “S” and Drive Cleats.
A fast payback item.
Uses approx. 3-5/8″ of material for S-Cleats, 2-1/8″ for Drive Cleats.

SPECIFICATIONS:

Capacity:	Galvanized Mild Steel	22-28 Ga
	Width of S-Cleat	1-1/16 in.
	Width of Drive Cleat	1-1/8 in.
Motor:		1.5 HP, single phase, 110v
Speed:		90 FPM
Dimensions:		Approx. 52 x 29 x 46 in.
Shipping Weight:		Approx. 565 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post TIN KNOCKER TK S&Drive 22 ga. Rollformer appeared first on Sheet Metal Machines.

TIN KNOCKER TK24 24 ga. Pittsburgh Roll Former w/Stand and Flanger Attachment

lt2@sierravictor.com — Thu, 28 Sep 2023 16:11:33 +0000

On the job site or in the shop, this portable little rollformer is a work horse for 24 gauge and lighter material. It is available with power flanging attachment and is perfect for field use. Steel stand included.
Portable rollformer is a work horse for 24 gauge and lighter material.
It is available with power flanging attachment and is perfect for field use.
With the included, all steel stand, it will also fit right in with your other shop equipment.
NOTE: When shipping, rollformer will fit inside stand

SPECIFICATIONS:
Capacity: 24 Gauge Mild Steel
Motor: 1/2 HP, 1700 RPM, 115 Volt, Single Phase, 60 Hz – Standard (optional – 230v/1/50 available – please call)
Depth of Pocket: Approx. 5/16″ (7.9mm) with hammer edge of 3/8″ (9.53mm)
Speed: Approx. 35 FPM
Flange Height: 3/16″ (4.76mm)
Dimensions of Roll Former: 30″ x 14″ x 20″ (762mm x 356mm x 508mm)
Dimensions of Stand: 35″ x 14″ x 24″ (889mm x 483mm x 610mm) add 6″ around for shipping
Shipping Dimensions: 41″ x 25″ x 30″ (1,041mm x 65mm x 762mm)
Weight: Rollformer: 305 lbs

OPTIONAL MODEL:
TIN KNOCKER TK24 24 ga. Pittsburgh Roll Former w/Stand = $2,950.00

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post TIN KNOCKER TK24 24 ga. Pittsburgh Roll Former w/Stand and Flanger Attachment appeared first on Sheet Metal Machines.

TIN KNOCKER 20 ga. Hem & Kick Roll Former

smm-admin — Tue, 23 May 2023 19:46:35 +0000

This machine is standard equipped with no tooling in the center position and (2) sets of outboard shafts equipped with;
1/2” x 180-degree hem rolls for 20-26ga (right side)
1/2 Hem with 5/8” Kick Rolls (left side)

SPECIFICATIONS:
Speed: 90 feet per minute
Motor: 5 HP 230/460V/3/60/1800 RPM (Please Specify)
Drive: Matched Double Vee Belt
Base: Arc Welded Steel. Heavy top plate
Feed table height: 34-5/8”
Shipping Weight: Approximately 1,050 lbs.
Dimensions: 68” long, 24” wide, 48” high

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post TIN KNOCKER 20 ga. Hem & Kick Roll Former appeared first on Sheet Metal Machines.

JAG TDC 18 Ga. RollFormer

smm-admin — Tue, 23 May 2023 19:45:50 +0000

Roll your own flanges and pocket the savings.
The TDC Rollformer has 12 forming stations and produces TDC flanges at speeds of up to 60 feet per minute (18.3m/min)!
JAG quality construction with an industrial motor and gearbox; high precision bearings; heavy-duty three zone chassis; plate head construction; hardened and ground roll shafts all protected with JAG’s top-quality primer and paint finish.
Optional rolls are available for TDC clip production (22 gauge).

SPECIFICATIONS:

Capacity: 18 – 24 gauge (0.70 – 1.31 mm)
Depth of Pocket: 1-7/8” (47.6 mm) / 2-1/8” (54.0 mm) for Clip
Speed: 50 fpm (15.2 m/min)
Motor: 10 HP (7 kw) – 230 volts, 60 cycle, 3 phase, AC, 1800 RPM
Dimensions: 117”L x 33W” x 46”H (2950 x 830 x 1150 mm)
Weight: 2,090 lbs. (950 kg)

OPTIONAL ITEMS:
Optional TDC Clip Roll Set: $CALL

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post JAG TDC 18 Ga. RollFormer appeared first on Sheet Metal Machines.

JAG TDF 16 Ga. RollFormer

smm-admin — Tue, 23 May 2023 19:45:50 +0000

Save time and money forming TDF flanges the easy way.
The 16-Station TDF Rollformer unitizes steel construction, high yield and tensile strength shafts, and “off the shelf” ball bearings.
Other key features and benefits include:
Heavy-duty Mod4 (6 pitch) gears.
Extended roll shafts for mounting auxiliary rolls (one side outboard only).
Optional tooling sets available for outboard mounting.
All steel forming head, hardened steel infeed guide, and hardened steel forming rolls mounted on turned and ground spindles.
No adjustments necessary when going from 26 gauge to 18 gauge material.
Includes Snap Flange Feature.
Comes standard with short parts feeder for 6 inch (152 mm) minimum lengths (requires no manual adjustment or removal of machine guards when running short parts).
Optional rolls available for TDF clip production (20 gauge).

SPECIFICATIONS:
Capacity: 16 – 26 gauge (0.55 – 1.31 mm)
Depth of Pocket: 1-11/16” (42.9 mm)
Speed: 50 fpm (15.2 m/min)
Motor: 7-1/2 HP (5.5 kw) – 230 volts,
60 cycle, 3 phase, AC, 1800 RPM
Dimensions: 141”L x 33W” x 46”H (3570 x 830 x 1150 mm)
Weight: 2,420 lbs. (1,100 kg)

OPTIONAL ITEMS:
Optional TDF Clip Roll Set: $CALL

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post JAG TDF 16 Ga. RollFormer appeared first on Sheet Metal Machines.

TIN KNOCKER TK24 24 Ga. Pittsburgh Roll Former with Stand

smm-admin — Tue, 23 May 2023 23:37:41 +0000

On the job site or in the shop, this portable little rollformer is a work horse for 24 gauge and lighter material. It is available with optional power flanging attachment and is perfect for field use. Steel stand included.
Portable rollformer is a work horse for 24 gauge and lighter material.
It is available with optional power flanging attachment and is perfect for field use.
With the included, all steel stand, it will also fit right in with your other shop equipment.
NOTE: When shipping, rollformer will fit inside stand

SPECIFICATIONS:
Capacity: 24 Gauge Mild Steel
Motor: 1/2 HP, 1700 RPM, 115 Volt, Single Phase, 60 Hz – Standard (Optional – 230v/1/50 available – please call)
Depth of Pocket: Approx. 5/16″ (7.9mm) with hammer edge of 3/8″ (9.53mm)
Speed: Approx. 35 FPM
Flange Height: 3/16″ (4.76mm)
Dimensions of Roll Former: 30″ x 14″ x 20″ (762mm x 356mm x 508mm)
Dimensions of Stand: 35″ x 14″ x 24″ (889mm x 483mm x 610mm) add 6″ around for shipping
Shipping Dimensions: 41″ x 25″ x 30″ (1,041mm x 65mm x 762mm)
Weight: Rollformer: 305 lbs

OPTIONAL MODEL:
TIN KNOCKER TK24 24 ga. Pittsburgh Roll Former w/Stand and Flanger Attachment = $3,550.00

OPTIONAL ITEMS:
20 or 24 gauge Flanging attachment = $985.00

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post TIN KNOCKER TK24 24 Ga. Pittsburgh Roll Former with Stand appeared first on Sheet Metal Machines.

TIN KNOCKER TK S&Drive Plus 20 Ga. Roll/Cleat Former

smm-admin — Tue, 23 May 2023 19:37:05 +0000

This machine pays for itself in scrap and labor savings! A versatile machine of multi-functions. It slits the blanks to width and feeds either of the two roll roll sets. The machine comes standard with your choice of two sets of tooling. Most common examples: 20 Ga. Pittsburgh and 4-in-1 Rolls and Male & Female 20 Ga. Button Lock. It is fast, too. Many other roll sets to choose from… two sets included. The slitting feature allows you to quickly and easily turn scrap metal into usable product. FAST, FAST PAYBACK.
Versatile
Turns scrap metal into usable drives
When fitted with auxiliary rolls, the payback is even faster
S & Drive Slitter to cut blanks and make cleats in one pass
S Cleat rolls down center
Drive Cleat rolls outboard on one side
20 Ga Pittsburgh outboard opposite of Drive Cleat

SPECIFICATIONS:

Capacity:	S Cleat (1-1/16 width)	22-28 Ga
	Drive Cleat (1-1/8 width)	20-26 Ga
	Pittsburgh	20-28 Ga
Motor:		5 H.P. motor 230/3/60
Speed:		90 FPM
Dimensions:		69″ x 29″ x 49″ (crated)
Weight:		890 lbs (crated)

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post TIN KNOCKER TK S&Drive Plus 20 Ga. Roll/Cleat Former appeared first on Sheet Metal Machines.

TIN KNOCKER TK20 20 Ga. Pittsburgh Roll Former

smm-admin — Tue, 23 May 2023 19:37:05 +0000

A workhorse! The heart of any HVAC sheet metal shop. This 5 station 20 Gauge Pittsburgh lock roll former is offered with choice of Drive Cleat or Acme Rolls on the other outboard side. Powered by a 1 HP motor with V-belt drive, this machine is built for dependability.

5 station 20 Gauge Pittsburgh lock rollformer is offered with choice of Drive Cleat or Acme rolls on the other outboard side.
Powered by a 1 HP motor with V-belt drive
Built for dependability.

SPECIFICATIONS:
Capacity: 20 Gauge to 26 Gauge Mild Steel
Motor: 1 HP, 115/230 Volt, 1800 RPM
Speed: Approx. 25 FPM
Depth of Pocket: 5/16″ (7.9mm)
Dimensions: 40″L x 24″W x 44″H (1016mm x 610mm x 1118mm)
Weight: 360 lbs. (136kg)

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post TIN KNOCKER TK20 20 Ga. Pittsburgh Roll Former appeared first on Sheet Metal Machines.

TIN KNOCKER TDP 18 Ga. Roll Former

smm-admin — Tue, 23 May 2023 23:36:39 +0000

(Produces either TDC or TDF flanges).

At last, an affordable, full service, high quality transverse duct connector machine! This 14 station roll former comes standard with TDC or TDF Rolls, Slitter and Clip Rolls outboard. This T-D-P roll former will roll sheet metal into leak proof, sealable TDC or TDF flanges at speeds of up to 50 fpm, automatically! Start saving time and money by forming your own TDC or TDF flanges – with their snap on corners – and eliminate spot welding altogether. Buyer must specify which set of transverse duct connector rolls is wanted on the machine (TDC or TDF). Slitting and Clip Rolls come on all TDP roll formers.

SPECIFICATIONS:
Capacity: T-D-P 18-24 ga. for T-D-P Uses approx. 1-7/8″ of material on T-D-P
50 feet per minute T-D-P Clip (min. length 20″) 22 ga. 2-1/8″ 2-1/8″
Forming Sections: 14
Shaft Diameter: 1.25″
Passline: 38.625″
Forming Speed: 50 fpm
Dimensions: (LxWxH) 38″ x 136.75″ x 46″
Weight: 3,450 lbs

OPTIONAL ITEMS:
Single Phase 1HP Motor: $850.00

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post TIN KNOCKER TDP 18 Ga. Roll Former appeared first on Sheet Metal Machines.

TIN KNOCKER TK16 16 ga. Pittsburgh Roll Former

smm-admin — Tue, 23 May 2023 19:35:45 +0000

IT COMES LOADED! The 16 gauge Pittsburgh Lock machine has 7 forming stations with 2 forming positions. One position forms the Pittsburgh Lock, while the outboard position has the ability of forming a number of other profiles, to include: Acme, Drive Cleat or 4 in 1 rolls (3/16” Right Angle Flange, 7/16” Right Angle Flange, Standing Seam and T-Connection). You don’t pay extra for the choice of opposing rolls, either. You get your choice of rolls opposite the Pittsburgh rolls.

SPECIFICATIONS:

Capacity: 16-20 Ga. uses approx. 1-3/8” of material
Motor: 3HP, 230/3/60, 1PH Optional (PLEASE SPECIFY)
Speed: 40-45 ft per minute
Depth of Pocket/Size: 1/2” width of hammer-over edge adjustable up to 3/8

ROLL CHART:

ROLLS	CAPACITY	APPROXIMATE MATERIAL USED	SIZE
Acme (“Double Seam”) Rolls (Type “L”)	16-22 gauge	1-1/4″	7/16″ seam
Drive Cleat Rolls	20-26 Gauge	2-1/8″	1-1/8″ width
Combination 4-in-1 Rolls and 4-Step Gauge Straight Right-Angled Flange Rolls	16-24 Gauge	up to 7/16″	up to 7/16″ high
Right-Angled Flange	22-26 Gauge	1/2″	1/2″ height
Standing Seam	22-26 Gauge	1-1/8″	5/8″ seam
T-Connection	22-26 Gauge	1-3/4″	5/8″ seam

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post TIN KNOCKER TK16 16 ga. Pittsburgh Roll Former appeared first on Sheet Metal Machines.