punch Archives - Sheet Metal Machines

NITTO KOHKI E55-0619 17 Ton HANDY SELFER Electro-Hydraulic Puncher

smm-admin — Tue, 23 May 2023 23:47:04 +0000

Self-contained hydraulic punch shows its power in making round or elongated holes in flat bar, angle bar or channel iron.

ACCESSORIES INCLUDED:

3mm / 4mm / 5mm Allen Wrench
Stand Assembly
EL Punch 18 / EL Die 18B / EL Die 18A Mounted on Machine
Spanner 10 x 12

SPECIFICATIONS:
Max. Punching Diameter: 13/16″
Max. Punching Thickness: 1/4″
Max. Output: 17 Tons
Power Source (Single Phase): 110-120V AC 50/60 Hz
Rated Power Consumption: 670 W
Rated Current: 7.0 A
Max. Punching Diameter: 13/16″
Max. Punching Thickness: 1/4″
Max. Throat Depth: 2-3/16″
Punching Time: 2 sec.
Weight: 31 lbs.

SELECTION OF DIES:

Application	Type of Die	Plate Thickness
Application	Type of Die	Mild Steel	Stainless Steel
For Thin Sheets	A	1/16″ – 1/8″	Max. 1/8″
For Thick Sheets	B	5/32″ – 1/4″	Max. 5/32″
For Channel Iron	C	9/32″ – 5/16″	N.A.

OPTIONAL ITEMS:
TBO00799-0: Foot Switch Assembly: Call for price
Punches and Dies for Handy Selfer – see photos, Call for price

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post NITTO KOHKI E55-0619 17 Ton HANDY SELFER Electro-Hydraulic Puncher appeared first on Sheet Metal Machines.

NITTO KOHKI HPD-05 10,000 psi Hydraulic Pump for HS Series Punchers 115V

smm-admin — Tue, 23 May 2023 23:47:03 +0000

Hydraulic Power Unit for HS Series Punchers: 115V; 10,000 PSI operating pressure
Portable Double-Acting Hydraulic Pump (to be used with the HS Series Punches)

SPECIFICATIONS:

Power Source (Single Phase)	115/230V AC (230V available upon request)
Allowable Max. Pressures	10,000psi (700 kgf/cm2)
Output qt/min	50Hz	60Hz
At No Load	1.28	1.53
At 10,000 psi	0.59	0.70
Motor	0.4kW 4P
Reservoir Capacity	4.26 qt
Discharge Port	Rc 3/8
Electro-Magnetic Valve	4 way 3 position valve
Weight	72 lbs. (32.5kg)

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post NITTO KOHKI HPD-05 10,000 psi Hydraulic Pump for HS Series Punchers 115V appeared first on Sheet Metal Machines.

NITTO KOHKI SELFER ACE 52 Ton Portable Double-acting Hydraulic Puncher HS11-1624

smm-admin — Tue, 23 May 2023 19:46:48 +0000

Double-acting hydraulic system allows automatic and inching (manual mode) operation.

ACCESSORIES INCLUDED:

Hose Kit Assembly
Hose Cord Assembly
Spanner
Spanner 12
Sub Handle Assembly
Chip Guard Ass’y
Tool Box
22mm Punch and Die mounted on machine
4mm Allen Wrench
5mm Allen Wrench

SPECIFICATIONS:
Max. Punching Diameter: 1-1/16″
Max. Punching Thickness: 5/8″ *, 1/4″ for 304 Stainless Steel
Max. Output: 52 Tons
Max. Throat Depth: 4-5/16″
Hole Making Time: Punching Time 11.8 sec., Returning Time 5.7 sec.
Allowable Max. Pressure: 10,000 psi
Weight: 66 lbs.

*1″ and 1-1/16″ punch requires the use of a split lock nut (UHA9936-0) and reduces the maximum thickness to 9/16″
In case of mild steel maximum punching thickness must be decided based on the equation of 0.8 x punching diameter. For details see the instruction manual.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post NITTO KOHKI SELFER ACE 52 Ton Portable Double-acting Hydraulic Puncher HS11-1624 appeared first on Sheet Metal Machines.

TIN KNOCKER TK18 8 Ton x 18 in. Throat Turret Punch

smm-admin — Tue, 23 May 2023 19:44:30 +0000

Introducing the Tin Knocker No. 18 Hand Turret Punch. A fast,accurate and flexible method of punching in the shop. Priced at what you would expect to pay for a used (second hand) machine, this 18 station, 8-ton punch is built to last. The solid cast and machined C frame and precision machined and ground turret make for smooth effortless punching over the user’s lifetime. Optional Stand

SPECIFICATIONS:
Capacity: 8 Tons
Throat Depth: 18″
Tooled Stations: 18
Punch Range: 1/8″ – 2-1/4″
Punch Sizes: 1/8″, 5/32″, 3/16″, 7/32″, 1/4″, 9/32″, 5/16″, 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 1″, 1-1/8″, 1-1/4″, 1-1/2″, 2″, 2-1/4″
Actuation: Hand Actuated
Approx. Shipping Dimensions: 30″ x 37″ x 58″
Approx. Weight: 530 lbs.

OPTIONAL ITEMS:
Stand: $350

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post TIN KNOCKER TK18 8 Ton x 18 in. Throat Turret Punch appeared first on Sheet Metal Machines.

SPECIFIC 90° Forming Punches & Dies

smm-admin — Tue, 23 May 2023 19:42:17 +0000

SPECIFICATIONS:

PUNCH MODEL	MATCHING DIE MODELS
NP-12 (90° x 1/64″ Radius)	ND-12 (1/8″ to 5/16″)
M-A (90° x 1/64″ Radius)	F-1/4″ (22ga.) and F-3/8″ (18ga.)
M-91 (90° x 1/64″ Radius)	F-1/2″ (16ga.) and F-5/8″ (14ga.)
M-92 (90° x 1/64″ Radius)	F-3/4″ (13ga.) and F-7/8″ (12ga.)
M-93 (90° x 3/32″ Radius)	F-1″ (11ga.) and F-1-1/8″ (10ga.)

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

WARRANTY: Please note that these products are considered consumables. As such, Specific Press Brake Dies stands behind their products and guarantees them to be free from defects in material and workmanship at the time of purchase. Working surfaces are flame hardened as needed in order to maintain the tool’s life expectancy.

The post SPECIFIC 90° Forming Punches & Dies appeared first on Sheet Metal Machines.

STANDARD INDUSTRIAL CM 100-500 Ton Straight Side Presses

smm-admin — Tue, 23 May 2023 19:34:22 +0000

The model CM straight side press is perfect for full length forming at full tonnage as well as left to right and off-center loading at full tonnage via our extremely heavy duty gibbing system and enclosed end frame design. The model CM also allows full front to back off-center loading the entire width of the press bed. No other design of press will give you more tonnage over the bed area.
The model CM straight side press is a more traditional style of straight side with much more left to right bed and ram area than the smaller bed DCSS presses. The CM is able to hold tolerance left to right much better than a direct hydraulic design due to its bellcrank linkage that gives the press full tonnage from one end of the press to the other.
Our single cylinder design develops full tonnage anywhere along the bed left to right and front to back. The bellcrank linkage system is actuated with a single cylinder utilizing A660 bronze at the bearing points. These off the shelf material bearings are designed to withstand up to 6 times the machines overall tonnage and they are covered by our extensive 5 year parts warranty. The model CM is truly designed to accept virtually all forms of press applications whether it is punching, forming, blanking, coining, swedging, die tryout, trimming, drawing and so on. The CM is available up to 1,000 tons and particularly excels at progressive die set ups where you have varying amounts of tonnage being applied across the bed all in the same stroke.
100% made in the USA with our unmatched 5 year parts warranty plus a lifetime of readily available parts all from your local suppliers. You will never have another “orphaned” machine due to an overseas manufacturer who can’t get you parts or a domestic manufacturer with proprietary parts that forces you to buy everything from them. With Standard Industrial you will always be able to get the part you need for the lifetime of the machine from any number of sources available to you.

OPTIONAL ITEMS:

Optional AUTOMEC CNC Control
Programmable logic controller (PLC) to control the base functions of the press including multiple job storage, stroke length, open height point, tonnage, decompression, ram delay/dwell at bottom of stroke (not under tonnage A mechanical standard to control limits of the press and is also included even with PLC.
Light curtain safety barrier system provides infra-red beam during operation and shuts machi Base op front of press only-other optional curtains can be quoted per customer specification.
Interlocking side barriers as physical barriers-can be used in conjunction with light curtains or alone
Special single color paint
Dwell under tonnage sustains desired tonnage for a set amount of time – typically used for manufacturers of plastics or fiberglass products
Custom or special controls per user specifications
Remote auto cycle for automated operations
Special machining of bed and/or ram
Removable bolster plates for bed
Die cushions for drawing and/or part ejection
Ejector cylinders for drops or parts
Scrap chutes or knockouts to remove drops or parts
Stroke dampers for punching or blanking operations allow more overall dimensions to increase
Quick change tooling components such as air actuated die lifters and/or power die removal systems-increase productivity by decreasing die change and set-up time
High speed or special hydraulic systems
T-slots in bed and ram (2 are standard in bed and ram)
Automatic lubrication systems to decrease maintenance operations
Safety gear lock systems with interlocking posts provide even more operator safety (Model AP only)
Additional open height (NOTE: Does not automatically increase stroke length)
Additional stroke for Model AP Four column press
(NOTE: Does not automatically increase open height)
Low speed retract allows the ram to return slower than normal
Pressure ram reversal allows the ram to return when a particular pressure is achieved.
Ram delay at bottom of stroke (not under tonnage)
Coil line processing and material feeding equipment
Custom and standard die sets
The model AM, DC and DCSS can have longer open heights but are limited to a maximum of 12″ stroke as an option
The model AM is available in longer lengths but not shorter lengths
W-Technologies stroke dampers allow more punching and blanking capacity without harming hydraulic system

The post STANDARD INDUSTRIAL CM 100-500 Ton Straight Side Presses appeared first on Sheet Metal Machines.

BAILEIGH Manual Ironworker with Punch SW-22M-P

smm-admin — Tue, 23 May 2023 19:42:00 +0000

The versatile SW-22M-P combines the capabilities of 2 machines, the manual sheet metal punch HP-160 and the manual ironworker SW-22M, in one. This solidly-built manual punching and shearing machine will save space in any small shop.
Shear station cuts angle iron, flat bar, T-bar, solid round, and solid square stock of varying thicknesses.
Includes 9 round punches and dies: 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, and 5/8”.
Back-stop lets you easily deliver repeatable results for light production work.
Material hold-downs ensure straight, clean shearing and punching.
Gear transfers the power from your arm to the blades via a sturdy handle.
Extra-long handle (longer than we could fit in the picture!) offers more leverage, multiplying your force and eliminating strain.
Made from durable plate steel to last for years and remain accurate.
Covered by a 1-year parts warranty and lifetime phone support

SPECIFICATIONS:
Shear Capacity Flat: 4″ x 5/16″
Shear Capacity Angle Iron: 2-3/8″ x 1/4″
Shear Capacity Plate: 1/4″
Shear Capacity Round: 5/8″
Shear Capacity Square: 5/8″
Throat Depth: 6.25″
Max. Punching Capacity: .314″
Power: Manual
Shipping Dimensions (L/W/H): 39″ x 16″ x 26″
Shipping Weight: 300 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post BAILEIGH Manual Ironworker with Punch SW-22M-P appeared first on Sheet Metal Machines.

BAILEIGH HP-160 5/16 in. Manual Sheet Metal Punch

smm-admin — Tue, 23 May 2023 19:39:00 +0000

We built this manual sheet metal punch to withstand years of use in a garage or fabrication shop. The HP-160 will make a perfect hole every time—faster and more efficiently than methods like drilling.

Manually operated with a long lever to multiply your strength.
Rugged capacity of up to .314” mild steel.
Comes standard with 9 sets of punches and dies, ranging from 1/8” to 5/8” round.
6.25” throat depth allows you to punch practically any part of a given piece of material.
Includes industrial material stop to make repeatability easier for production runs.
Made from heavy-duty 1.5” steel plate and weighs an impressive 176 lbs. This sturdy construction adds strength to the machine and ensures accurate results.
Backed by a 1-year parts warranty and lifetime technical support by phone from our experienced team.

SPECIFICATIONS:
Max Punching Capacity: .314″
Throat Depth: 6.25″
Power: Manual
Shipping Dimensions (L/W/H): 20.5″ x 9″ x 36.6″
Shipping Weight: 230 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post BAILEIGH HP-160 5/16 in. Manual Sheet Metal Punch appeared first on Sheet Metal Machines.