manual press brakes Archives - Sheet Metal Machines https://sheetmetalmachines.com/product-tag/manual-press-brakes/ New Metalworking Machinery and Equipment Sales Tue, 14 Jul 2026 20:27:59 +0000 en-US hourly 1 https://wordpress.org/?v=7.1 https://sheetmetalmachines.com/wp-content/uploads/2023/10/cropped-Smm_logo_2023_3-fav-32x32.png manual press brakes Archives - Sheet Metal Machines https://sheetmetalmachines.com/product-tag/manual-press-brakes/ 32 32 U.S. INDUSTRIAL USHB22-4HM 22 Tons x 4 ft Hydraulic Press Brake https://sheetmetalmachines.com/product/us-industrial-ushb22-4hm/ Tue, 23 May 2023 19:39:04 +0000 https://sheetmetalmachines.com/product/u-s-industrial-ushb22-4hm-hydraulic-press-brake/ Due to current tariff policies ALL USI products are CALL FOR PRICE and AVAILABILITY
U.S. INDUSTRIAL USHB22-4HM Hydraulic Press Brake 22 Ton working pressure and 4 ft Length of working table. Free Gooseneck Punch and multi-opening Die for up to 90° forming up to 10-gauge mild steel. FRONT OPERATED POWER BACKGAUGE, POWER RAM ADJUST, MANUAL FINE ADJUST HANDWHEELS and DIGITAL POSTION DISPLAYS.
Equipped with Sick deTec 4 Light Curtain.

The post U.S. INDUSTRIAL USHB22-4HM 22 Tons x 4 ft Hydraulic Press Brake appeared first on Sheet Metal Machines.

]]>
  • Power Front Operated Back Gauge, motorized with fine adjustment handwheel
    Digital Display shows Backguage position in .001”
  • Power Ram Depth Control, motorized with fine adjustment handwheel
    Digital Displays shows Ram position in .001”
  • Ram Deflection Adjustment
  • Massive Torsion Bar for Parallelism
  • Three Speed Ram
  • Bottom Time Delay
  • Inching and Single Cycle
  • Setting for ram speed slowdown and return position
  • Forged Heavy Duty Cylinder and Body
  • Rapid Approach, Bending and Rapid Retreat
  • All Steel Construction
  • Bed tools are held with standard slot for ½” x 5/8” tang w/set screws, plus die clamps are included
  • Ram takes standard American Tang Tooling (1/2” x 5/8”) and American Safety Tang Tooling, and Z1
    Space between Ram Tool Clamps allows for deep box bending
  • FRONT OPERATED POWER BACKGAUGE, POWER RAM ADJUST, MANUAL FINE ADJUST HANDWHEELS and DIGITAL POSTION DISPLAYS
  • *Photos shown are manual Hydraulic Press Brake with front-operated power backgauge, power ram adjustment, both with manual fine adjustment and digital readouts. Operator’s pendant has dwell adjustment for ram, key lockout, jog control and E-stop.
  • Free Gooseneck Punch and multi-opening Die for up to 90° forming up to 10-gauge mild steel. *Special Note: The Gooseneck Punch and multi-opening Die included are general purpose tools to be used for training. Precision tooling should be purchased to meet your specific needs. The punch is segmented and it is up to the customer to calibrate these if they to want use them for a particular purpose. *There is no warranty on this tooling.

    • EQUIPPED WITH:

    • Sick deTec 4 Light Curtain

    SPECIFICATIONS:
    Working pressure: 22 tons
    Length of working table: 51.9″
    Distance between housings: 40.1″
    Throat depth: 7.8″
    Stroke adjustment of ram: 2.75″
    Ram travel: 3.14″
    Open height: 9.64″
    Rapid Ram Travel Speed: 2.4″ / sec
    Rapid Ram Retreat Speed: 2.0″ / sec
    Pressing Speed: Dependent on Tool Load
    Motor: 7.5 HP, 220 or 440V, 3 ph
    Hydraulic Oil Capacity: 21 gal.
    Dimensions: 73″ x 56″ x 77″
    Weight approx.: 4,400 lbs

    OPTIONAL ITEMS – CALL FOR PRICE:
    Upgrade to Cam-Lever Quick Action Ram Clamps
    Training in our Memphis, TN Showroom
    Training at customer site, less than 300 miles from Memphis
    Training at customer site, more than 300 miles from Memphis
    Training outside continental USA

    Specifications are subject to change without notice.
    NOTE: Data is provided by the manufacturer.
    WARRANTY: 1 YEAR – Parts

    The post U.S. INDUSTRIAL USHB22-4HM 22 Tons x 4 ft Hydraulic Press Brake appeared first on Sheet Metal Machines.

    ]]>