STANDART SPECS AND ACCESSORIES:

• UPPER BEAM WITH HIGH STROKE
• With its 13.77 inch standard opening height capacity, you can do box/pan bendings up to 4.92 inch depth. Optionally 7.87/15.74 inch tool/stroke configuration is possible
• Thanks to the dual driven ballscrew spindle system, you can use maximum power for clamping, especially effective for hemming operations
• Thanks to its brass and oil-free friction plates on the linear guides, you can work for years without any lubrication or maintenance
• Also thanks to the protective bellows, no dirt or dust is allowed in the swivel parts of this axis
• 59 INCH SERVO BACK GAUGE WITH RECTANGULAR SHEET SUPPORT TABLE
• 59 inch servo driven back gauge system
• 59 inch long rectangular sheet support table with stainless ball-casters
• 14 set pneumatic lifted gauging arms with solid fingers + pneumatic triangle fingers as 2 sectors
• Sliders can be pulled back to create space for down flanges at the back of the bottom tool
• FOOT PEDAL WITH 3 SWITCHES
• 3 switch foot pedal with panic button function on two steps.
  (Sudden step on left pedal = clamping beam goes up immediately)
  (Sudden step on middle pedal = folding beam and all axis stops immediately)
• VERTICAL OR HORIZAONTAL FRONT LIGHT BARRIERS
• For operator safety, front light barriers are located at the left and right front side of the machine, managed by safety PLC and prevent unwanted interventions to avoid accidents. You can choose as horizontal or vertical or you can completely remove the light barriers from your configuration.
• ERFOLD BASIC CNC LINE BY LINE CONTROLLER SOFTWARE
• 15.6″ touchscreen PC based controller on swivel arm
• Line by line part programming by entering numerical values of the axes
• Creating,saving,loading parts with different names,materials and sheet thicknesses
• Open or drop hemming function
• Multi radius bending function
• 16 GB memory for unlimited receipt storage
• Manual axis controls, alarm and error indications, machine detailed parameters
• STANDART TOOLS
  6.69 inch HIGH SEGMENTED GOAT FOOT TOOLS
  • 42CrMo4 grinded material, nose part is 60 RC laser surface hardened and whole body is darkened against corrosion and laser marked regarding the segment length and height
  • Segmented between 1.18 – 19.68 inch lengths (2 pcs corner tools included)
• MANUAL FOLDING BEAM ADJUSTMENT
• Manual height adjustment of folding beam up to 3.14 inch according to the sheet thickness or bending point radius requested.
• Located in left and right side and should be adjusted equally on both sides

SPECIFICATIONS:

TECHNICAL PARAMETERS OF 11 AXIS

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS – CALL FOR PRICE:

• 15.74 inch clamping beam opening and 200 mm high tools upgrade.
• 98.42 / 126 / 165.35 inch servo backgauge system upgrade with L / T / U shape sheet support table options.
• ERFOLD ADVANCED 2D/3D CNC Graphic Control Software.
• Motorized folding beam adjustment.
• Pneumatic goat foot quick clamping.
• Manual crowning system.
• Feather grooves with solid lower beam tool without channels.
• Segmented bottom or folding beam tools.

• ERFOLD ADVANCED 2D / 3D CNC GRAPHICAL CONTROL SOFTWARE
• 15.6″ touchscreen all-in one industrial pc controller on swivel arm
• 2D part editor: you can create a new bending programme by drawing or line by line and and visualize in 2D
• 3D editor: You can draw the parts in 3D or you can import 3D step/igs files over your offline software
• You can determine and change the bending sequence on the created part
• 3D simulation of bending to check for collisions and intervene if needed
• Capability of choosing material type, thickness, springback, shortening,bending correction and creating data base for every type of material or lot
• Tool library and edit: You can import, create by drawing and define new tools, save, recall or delete in the library
• Authorization levels with special passwords
• Real time simulated production page in which you can monitor all axes movements on 3D graphic view of the machine and also numerical values of the axes
• 16 GB hard disk space which allows you to save unlimited bending receipt or tool data
• Detailed alarm and parameters page
• MANUAL CROWNING SYSTEM
• On long and thin sheets, in order to prevent the banana shape bends, you just need to adjust the crowning between %25 and %100 to give more support from the middle side of the folding beam max 2,5 mm
• SERVO FOLDING BEAM ADJUSTMENT ( A AXIS)
• By lowering your folding beam down, you can adjust your bending (pivot) point according to the sheet thickness or you can increase the radius of your bends
• LONGER RECTANGULAR SHEET SUPPORT TABLE
• 98.42 / 118 / 157.48 inch long rectangular sheet support table and back gauges
• Front side gauging arms + middle and back side triangle fingers up to 6 sectors
• Movable sliders for down flanges + steady side gauge
• L / T or U SHAPE SHEET SUPPORT TABLE (TO WORK FROM THE BACK SIDE)
• 118 / 59 inch or 157.48 / 59 inch long L or U shape sheet support table with ball casters.
• Front side gauging arms + middle and back side triangle fingers up to 6 sectors
• SEGMENTED LOWER BEAM AND FOLDING BEAM TOOLS
• Fully segmented lower beam and folding beam tools (1 set)
• Segmentation widths are same with goat foot tool widths
• 7.87 INCH HIGH GOAT FOOT TOOLS + 15.74 INCH UPPER BEAM STROKE
• PNEUMATIC GOAT FOOT QUICK CLAMPING SYSTEM
• Eliminates the time for tool-setup. No time spent for screwing or unscrewing, just by turning one key, all tools are clamped or unclamped so that you can slide, remove or mount all goat foot tools just in seconds
• VACCUM TABLE WITH SUCTION CUPS
• Thanks to the suction cups placed on the front gauging group;
  • Misalignment of the sheet is avoided.
  • Dropping down of the sheet because of downwards flanges is avoided.
  • No need to support the sheet anymore from the front side during multi radius bends.
  • If the gauging side of the sheet is oval or can not be gauged well to the standard fingers/gauges, you do not need to adjust it again in each bending step.

The post ERBEND SFA 4225 13ft x 0.098 in. CNC Servo Sheet Metal Folding Machine appeared first on Sheet Metal Machines.

STANDART SPECS AND ACCESSORIES:

• UPPER BEAM WITH HIGH STROKE
• With its 13.77 inch standard opening height capacity, you can do box/pan bendings up to 4.92 inch depth. Optionally 7.87/15.74 inch tool/stroke configuration is possible
• Thanks to the dual driven ballscrew spindle system, you can use maximum power for clamping, especially effective for hemming operations
• Thanks to its brass and oil-free friction plates on the linear guides, you can work for years without any lubrication or maintenance
• Also thanks to the protective bellows, no dirt or dust is allowed in the swivel parts of this axis
• 59 INCH SERVO BACK GAUGE WITH RECTANGULAR SHEET SUPPORT TABLE
• 59 inch servo driven back gauge system
• 59 inch long rectangular sheet support table with stainless ball-casters
• 14 set pneumatic lifted gauging arms with solid fingers + pneumatic triangle fingers as 2 sectors
• Sliders can be pulled back to create space for down flanges at the back of the bottom tool
• FOOT PEDAL WITH 3 SWITCHES
• 3 switch foot pedal with panic button function on two steps.
  (Sudden step on left pedal = clamping beam goes up immediately)
  (Sudden step on middle pedal = folding beam and all axis stops immediately)
• VERTICAL OR HORIZAONTAL FRONT LIGHT BARRIERS
• For operator safety, front light barriers are located at the left and right front side of the machine, managed by safety PLC and prevent unwanted interventions to avoid accidents. You can choose as horizontal or vertical or you can completely remove the light barriers from your configuration.
• ERFOLD BASIC CNC LINE BY LINE CONTROLLER SOFTWARE
• 15.6″ touchscreen PC based controller on swivel arm
• Line by line part programming by entering numerical values of the axes
• Creating,saving,loading parts with different names,materials and sheet thicknesses
• Open or drop hemming function
• Multi radius bending function
• 16 GB memory for unlimited receipt storage
• Manual axis controls, alarm and error indications, machine detailed parameters
• STANDART TOOLS
  6.69 inch HIGH SEGMENTED GOAT FOOT TOOLS
  • 42CrMo4 grinded material, nose part is 60 RC laser surface hardened and whole body is darkened against corrosion and laser marked regarding the segment length and height
  • Segmented between 1.18 – 19.68 inch lengths (2 pcs corner tools included)
• MANUAL FOLDING BEAM ADJUSTMENT
• Manual height adjustment of folding beam up to 3.14 inch according to the sheet thickness or bending point radius requested.
• Located in left and right side and should be adjusted equally on both sides

SPECIFICATIONS:

TECHNICAL PARAMETERS OF 11 AXIS

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS – CALL FOR PRICE:

• 15.74 inch clamping beam opening and 200 mm high tools upgrade.
• 98.42 / 126 / 165.35 inch servo backgauge system upgrade with L / T / U shape sheet support table options.
• ERFOLD ADVANCED 2D/3D CNC Graphic Control Software.
• Motorized folding beam adjustment.
• Pneumatic goat foot quick clamping.
• Manual crowning system.
• Feather grooves with solid lower beam tool without channels.
• Segmented bottom or folding beam tools.

• ERFOLD ADVANCED 2D / 3D CNC GRAPHICAL CONTROL SOFTWARE
• 15.6″ touchscreen all-in one industrial pc controller on swivel arm
• 2D part editor: you can create a new bending programme by drawing or line by line and and visualize in 2D
• 3D editor: You can draw the parts in 3D or you can import 3D step/igs files over your offline software
• You can determine and change the bending sequence on the created part
• 3D simulation of bending to check for collisions and intervene if needed
• Capability of choosing material type, thickness, springback, shortening,bending correction and creating data base for every type of material or lot
• Tool library and edit: You can import, create by drawing and define new tools, save, recall or delete in the library
• Authorization levels with special passwords
• Real time simulated production page in which you can monitor all axes movements on 3D graphic view of the machine and also numerical values of the axes
• 16 GB hard disk space which allows you to save unlimited bending receipt or tool data
• Detailed alarm and parameters page
• MANUAL CROWNING SYSTEM
• On long and thin sheets, in order to prevent the banana shape bends, you just need to adjust the crowning between %25 and %100 to give more support from the middle side of the folding beam max 2,5 mm
• SERVO FOLDING BEAM ADJUSTMENT ( A AXIS)
• By lowering your folding beam down, you can adjust your bending (pivot) point according to the sheet thickness or you can increase the radius of your bends
• LONGER RECTANGULAR SHEET SUPPORT TABLE
• 98.42 / 118 / 157.48 inch long rectangular sheet support table and back gauges
• Front side gauging arms + middle and back side triangle fingers up to 6 sectors
• Movable sliders for down flanges + steady side gauge
• L / T or U SHAPE SHEET SUPPORT TABLE (TO WORK FROM THE BACK SIDE)
• 118 / 59 inch or 157.48 / 59 inch long L or U shape sheet support table with ball casters.
• Front side gauging arms + middle and back side triangle fingers up to 6 sectors
• SEGMENTED LOWER BEAM AND FOLDING BEAM TOOLS
• Fully segmented lower beam and folding beam tools (1 set)
• Segmentation widths are same with goat foot tool widths
• 7.87 INCH HIGH GOAT FOOT TOOLS + 15.74 INCH UPPER BEAM STROKE
• PNEUMATIC GOAT FOOT QUICK CLAMPING SYSTEM
• Eliminates the time for tool-setup. No time spent for screwing or unscrewing, just by turning one key, all tools are clamped or unclamped so that you can slide, remove or mount all goat foot tools just in seconds
• VACCUM TABLE WITH SUCTION CUPS
• Thanks to the suction cups placed on the front gauging group;
  • Misalignment of the sheet is avoided.
  • Dropping down of the sheet because of downwards flanges is avoided.
  • No need to support the sheet anymore from the front side during multi radius bends.
  • If the gauging side of the sheet is oval or can not be gauged well to the standard fingers/gauges, you do not need to adjust it again in each bending step.

The post ERBEND SFA 3230 10ft x 0.118 in. CNC Servo Sheet Metal Folding Machine appeared first on Sheet Metal Machines.

STANDART SPECS AND ACCESSORIES:

• UPPER BEAM WITH HIGH STROKE
• With its 13.77 inch standard opening height capacity, you can do box/pan bendings up to 4.92 inch depth. Optionally 7.87/15.74 inch tool/stroke configuration is possible
• Thanks to the dual driven ballscrew spindle system, you can use maximum power for clamping, especially effective for hemming operations
• Thanks to its brass and oil-free friction plates on the linear guides, you can work for years without any lubrication or maintenance
• Also thanks to the protective bellows, no dirt or dust is allowed in the swivel parts of this axis
• 59 INCH SERVO BACK GAUGE WITH RECTANGULAR SHEET SUPPORT TABLE
• 59 inch servo driven back gauge system
• 59 inch long rectangular sheet support table with stainless ball-casters
• 14 set pneumatic lifted gauging arms with solid fingers + pneumatic triangle fingers as 2 sectors
• Sliders can be pulled back to create space for down flanges at the back of the bottom tool
• FOOT PEDAL WITH 3 SWITCHES
• 3 switch foot pedal with panic button function on two steps.
  (Sudden step on left pedal = clamping beam goes up immediately)
  (Sudden step on middle pedal = folding beam and all axis stops immediately)
• VERTICAL OR HORIZAONTAL FRONT LIGHT BARRIERS
• For operator safety, front light barriers are located at the left and right front side of the machine, managed by safety PLC and prevent unwanted interventions to avoid accidents. You can choose as horizontal or vertical or you can completely remove the light barriers from your configuration.
• ERFOLD BASIC CNC LINE BY LINE CONTROLLER SOFTWARE
• 15.6″ touchscreen PC based controller on swivel arm
• Line by line part programming by entering numerical values of the axes
• Creating,saving,loading parts with different names,materials and sheet thicknesses
• Open or drop hemming function
• Multi radius bending function
• 16 GB memory for unlimited receipt storage
• Manual axis controls, alarm and error indications, machine detailed parameters
• STANDART TOOLS
  6.69 inch HIGH SEGMENTED GOAT FOOT TOOLS
  • 42CrMo4 grinded material, nose part is 60 RC laser surface hardened and whole body is darkened against corrosion and laser marked regarding the segment length and height
  • Segmented between 1.18 – 19.68 inch lengths (2 pcs corner tools included)
• MANUAL FOLDING BEAM ADJUSTMENT
• Manual height adjustment of folding beam up to 3.14 inch according to the sheet thickness or bending point radius requested.
• Located in left and right side and should be adjusted equally on both sides

SPECIFICATIONS:

TECHNICAL PARAMETERS OF 11 AXIS

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS – CALL FOR PRICE:

• 15.74 inch clamping beam opening and 200 mm high tools upgrade.
• 98.42 / 126 / 165.35 inch servo backgauge system upgrade with L / T / U shape sheet support table options.
• ERFOLD ADVANCED 2D/3D CNC Graphic Control Software.
• Motorized folding beam adjustment.
• Pneumatic goat foot quick clamping.
• Manual crowning system.
• Feather grooves with solid lower beam tool without channels.
• Segmented bottom or folding beam tools.

• ERFOLD ADVANCED 2D / 3D CNC GRAPHICAL CONTROL SOFTWARE
• 15.6″ touchscreen all-in one industrial pc controller on swivel arm
• 2D part editor: you can create a new bending programme by drawing or line by line and and visualize in 2D
• 3D editor: You can draw the parts in 3D or you can import 3D step/igs files over your offline software
• You can determine and change the bending sequence on the created part
• 3D simulation of bending to check for collisions and intervene if needed
• Capability of choosing material type, thickness, springback, shortening,bending correction and creating data base for every type of material or lot
• Tool library and edit: You can import, create by drawing and define new tools, save, recall or delete in the library
• Authorization levels with special passwords
• Real time simulated production page in which you can monitor all axes movements on 3D graphic view of the machine and also numerical values of the axes
• 16 GB hard disk space which allows you to save unlimited bending receipt or tool data
• Detailed alarm and parameters page
• MANUAL CROWNING SYSTEM
• On long and thin sheets, in order to prevent the banana shape bends, you just need to adjust the crowning between %25 and %100 to give more support from the middle side of the folding beam max 2,5 mm
• SERVO FOLDING BEAM ADJUSTMENT ( A AXIS)
• By lowering your folding beam down, you can adjust your bending (pivot) point according to the sheet thickness or you can increase the radius of your bends
• LONGER RECTANGULAR SHEET SUPPORT TABLE
• 98.42 / 118 / 157.48 inch long rectangular sheet support table and back gauges
• Front side gauging arms + middle and back side triangle fingers up to 6 sectors
• Movable sliders for down flanges + steady side gauge
• L / T or U SHAPE SHEET SUPPORT TABLE (TO WORK FROM THE BACK SIDE)
• 118 / 59 inch or 157.48 / 59 inch long L or U shape sheet support table with ball casters.
• Front side gauging arms + middle and back side triangle fingers up to 6 sectors
• SEGMENTED LOWER BEAM AND FOLDING BEAM TOOLS
• Fully segmented lower beam and folding beam tools (1 set)
• Segmentation widths are same with goat foot tool widths
• 7.87 INCH HIGH GOAT FOOT TOOLS + 15.74 INCH UPPER BEAM STROKE
• PNEUMATIC GOAT FOOT QUICK CLAMPING SYSTEM
• Eliminates the time for tool-setup. No time spent for screwing or unscrewing, just by turning one key, all tools are clamped or unclamped so that you can slide, remove or mount all goat foot tools just in seconds
• VACCUM TABLE WITH SUCTION CUPS
• Thanks to the suction cups placed on the front gauging group;
  • Misalignment of the sheet is avoided.
  • Dropping down of the sheet because of downwards flanges is avoided.
  • No need to support the sheet anymore from the front side during multi radius bends.
  • If the gauging side of the sheet is oval or can not be gauged well to the standard fingers/gauges, you do not need to adjust it again in each bending step.

The post ERBEND SFA 2535 8ft x 0.137 in. CNC Servo Sheet Metal Folding Machine appeared first on Sheet Metal Machines.

STANDART SPECS AND ACCESSORIES:

• UPPER BEAM WITH HIGH STROKE
• With its 13.77 inch standard opening height capacity, you can do box/pan bendings up to 4.92 inch depth. Optionally 7.87/15.74 inch tool/stroke configuration is possible
• Thanks to the dual driven ballscrew spindle system, you can use maximum power for clamping, especially effective for hemming operations
• Thanks to its brass and oil-free friction plates on the linear guides, you can work for years without any lubrication or maintenance
• Also thanks to the protective bellows, no dirt or dust is allowed in the swivel parts of this axis
• 59 INCH SERVO BACK GAUGE WITH RECTANGULAR SHEET SUPPORT TABLE
• 59 inch servo driven back gauge system
• 59 inch long rectangular sheet support table with stainless ball-casters
• 14 set pneumatic lifted gauging arms with solid fingers + pneumatic triangle fingers as 2 sectors
• Sliders can be pulled back to create space for down flanges at the back of the bottom tool
• FOOT PEDAL WITH 3 SWITCHES
• 3 switch foot pedal with panic button function on two steps.
  (Sudden step on left pedal = clamping beam goes up immediately)
  (Sudden step on middle pedal = folding beam and all axis stops immediately)
• VERTICAL OR HORIZAONTAL FRONT LIGHT BARRIERS
• For operator safety, front light barriers are located at the left and right front side of the machine, managed by safety PLC and prevent unwanted interventions to avoid accidents. You can choose as horizontal or vertical or you can completely remove the light barriers from your configuration.
• ERFOLD BASIC CNC LINE BY LINE CONTROLLER SOFTWARE
• 15.6″ touchscreen PC based controller on swivel arm
• Line by line part programming by entering numerical values of the axes
• Creating,saving,loading parts with different names,materials and sheet thicknesses
• Open or drop hemming function
• Multi radius bending function
• 16 GB memory for unlimited receipt storage
• Manual axis controls, alarm and error indications, machine detailed parameters
• STANDART TOOLS
  6.69 inch HIGH SEGMENTED GOAT FOOT TOOLS
  • 42CrMo4 grinded material, nose part is 60 RC laser surface hardened and whole body is darkened against corrosion and laser marked regarding the segment length and height
  • Segmented between 1.18 – 19.68 inch lengths (2 pcs corner tools included)
• MANUAL FOLDING BEAM ADJUSTMENT
• Manual height adjustment of folding beam up to 3.14 inch according to the sheet thickness or bending point radius requested.
• Located in left and right side and should be adjusted equally on both sides

SPECIFICATIONS:

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS – CALL FOR PRICE:

• 15.74 inch clamping beam opening and 200 mm high tools upgrade.
• 98.42 / 126 / 165.35 inch servo backgauge system upgrade with L / T / U shape sheet support table options.
• ERFOLD ADVANCED 2D/3D CNC Graphic Control Software.
• Motorized folding beam adjustment.
• Pneumatic goat foot quick clamping.
• Manual crowning system.
• Feather grooves with solid lower beam tool without channels.
• Segmented bottom or folding beam tools.

• ERFOLD ADVANCED 2D / 3D CNC GRAPHICAL CONTROL SOFTWARE
• 15.6″ touchscreen all-in one industrial pc controller on swivel arm
• 2D part editor: you can create a new bending programme by drawing or line by line and and visualize in 2D
• 3D editor: You can draw the parts in 3D or you can import 3D step/igs files over your offline software
• You can determine and change the bending sequence on the created part
• 3D simulation of bending to check for collisions and intervene if needed
• Capability of choosing material type, thickness, springback, shortening,bending correction and creating data base for every type of material or lot
• Tool library and edit: You can import, create by drawing and define new tools, save, recall or delete in the library
• Authorization levels with special passwords
• Real time simulated production page in which you can monitor all axes movements on 3D graphic view of the machine and also numerical values of the axes
• 16 GB hard disk space which allows you to save unlimited bending receipt or tool data
• Detailed alarm and parameters page
• MANUAL CROWNING SYSTEM
• On long and thin sheets, in order to prevent the banana shape bends, you just need to adjust the crowning between %25 and %100 to give more support from the middle side of the folding beam max 2,5 mm
• SERVO FOLDING BEAM ADJUSTMENT ( A AXIS)
• By lowering your folding beam down, you can adjust your bending (pivot) point according to the sheet thickness or you can increase the radius of your bends
• LONGER RECTANGULAR SHEET SUPPORT TABLE
• 98.42 / 118 / 157.48 inch long rectangular sheet support table and back gauges
• Front side gauging arms + middle and back side triangle fingers up to 6 sectors
• Movable sliders for down flanges + steady side gauge
• L / T or U SHAPE SHEET SUPPORT TABLE (TO WORK FROM THE BACK SIDE)
• 118 / 59 inch or 157.48 / 59 inch long L or U shape sheet support table with ball casters.
• Front side gauging arms + middle and back side triangle fingers up to 6 sectors
• SEGMENTED LOWER BEAM AND FOLDING BEAM TOOLS
• Fully segmented lower beam and folding beam tools (1 set)
• Segmentation widths are same with goat foot tool widths
• 7.87 INCH HIGH GOAT FOOT TOOLS + 15.74 INCH UPPER BEAM STROKE
• PNEUMATIC GOAT FOOT QUICK CLAMPING SYSTEM
• Eliminates the time for tool-setup. No time spent for screwing or unscrewing, just by turning one key, all tools are clamped or unclamped so that you can slide, remove or mount all goat foot tools just in seconds
• VACCUM TABLE WITH SUCTION CUPS
• Thanks to the suction cups placed on the front gauging group;
  • Misalignment of the sheet is avoided.
  • Dropping down of the sheet because of downwards flanges is avoided.
  • No need to support the sheet anymore from the front side during multi radius bends.
  • If the gauging side of the sheet is oval or can not be gauged well to the standard fingers/gauges, you do not need to adjust it again in each bending step.

The post ERBEND SFA 2040 6ft x 0.157 in. CNC Servo Sheet Metal Folding Machine appeared first on Sheet Metal Machines.

• BLANK HOLDER GROUP:
• Standart 6.69 in. and optional 10 in. high/deep blank holders with movable corner tools.
• Pneumatic tool clamping system to make the tool set-up just in seconds
• BENDING GROUP:
• Can execute all the required forms for panels like normal bends up to 140°, side hemming, large radius bending by pressing and also some special functions like air bend by pushing.
• BLANK SHEET SQUARING UNITS:
• Regarding the blank sheet’s long side measure in the programme, they are automatically and motorized positioned in the right and left side on the table, just in front of the bending line. After the pedal command of the cycle start, they go down and dis a appear.
• SHEET SUPPORT TABLE:
• For long life and sensitive materials, all the table is made of inox 304 matte surface stainless steel.
• Upon request, the surface of the table can be equipped with round stainless ball transfers or round brushes
• SERVO MANIPULATOR:
• Thanks to the 3.5 tons of pinching pressure, sheet feeding and rotation is executed with extreme precision in all lengths or thicknesses.
• By the help of repositioning movement, the part can be pinched from the back side of the blank and narrower parts can be processed easily
• ERFOLD PB CNC CONTROL SOFTWARE:
• Windows based numerical control software on 15.6″ touchscreen controller
• In ERFOLD PB controller software, each bending step of each side is programmed numerically and functionally.
• First bend type is defined (normal bend, hemming, auto radius etc),and flange length is entered
• After bending measures, you enter sheet manipulation commands/functions like rotate +/- 90°/180°
• Although numerical programming looks difficult, by means of making precise adjustment regarding the material’s reaction, it is much more advantageous.

SPECIFICATIONS:

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post ERBEND PBC CNC Compact Panel Benders – Options Available appeared first on Sheet Metal Machines.

STANDART SPECS AND ACCESSORIES:

• • SPECIFICALLY DESIGNED FOR HVAC INDUSTRY FOR AIR DUCT AND CHIMNEY PRODUCTION
  • SPECIAL UPPER BEAM
    • Thanks to its 4.72 inch high x 4.52 inch wide small footprint upper beam, it can fold minimum 150×150 mm air duct / chimney type parts which are totally closed after folding.
    • To be able to remove the part without stretching it, upper beam is released from the right side of the frame by a pneumatic pin and the beam is retracted towards the front side.
  • 39.37 INCH SERVO BACKGAUGE SYSTEM WITH SPECIAL HIGH GAUGING BAR
    • 39.37 inch servo driven backgauge and single piece high, gauging flat bar
    • 39.37 inch long rectangular sheet support table with stainless ball transfers
    • Retractable or removable table slides
  • 3 SWITCH FOOT PEDAL WITH EMERGENCY FUNCTIONS
  • VERTICAL OR HORIZONTAL FRONT LIGHT BARRIERS
    • For operator safety, front light barriers are located at the left and right front side of the machine, managed by safety PLC and prevent unwanted interventions to avoid accidents. You can choose as horizontal or vertical or you can completely remove the light barriers from your configuration.
  • TOOL HOLDER
    • 2 fixed spaces for keeping single piece sharpnose or folding tools
  • ERFOLD BASIC CNC LINE BY LINE CONTROLLER SOFTWARE
    • Very user friendly, iconic screen layout
    • 15.6″ panel touchscreen controller on swivel arm
    • Windows based Erfold software that allows you to store and reload back ups of the factory settings or saves programmes easily
    • 128 gb memory for unlimited receipt storage
    • Line by line part programming by entering numerical values of the axes for each step
    • Creating, saving, loading parts with different names, materials and sheet thicknesses
    • Open or drop hemming function
    • Multi radius bending function as by pressing or by bending
    • Backgauge finger pause and on/off functions
    • Material database control for springback correction and folding beam height correction regarding material type, thickness and length
    • Piece counter for lot production
    • Manual axis controls, alarm and error indications, machine detailed parameter pages
    • Remote service connection via wireless internet
    • User authorization with special passwords.
  • STANDARD TOOLS
    • • UPPER BEAM PIECE SHARP NOSE TOOL
        • Grinded,tool steel material, single piece, 20° nose angle

     

  • SEGMENTED FOLDING BEAM TOOLS AND SEGMENTED LOWER BEAM TOOL

• MANUAL FOLDING BEAM ADJUSTMENT
  • Manual height adjustment of folding beam according to the sheet thickness or bending point radius
  • Located in left and right side and should be adjusted equally on both sides as thickness x 1 for sharp bending radius or thickness x 1,5 /2,5 for more oval radius.
  • More you lower the folding beam, more you have to increase the bending angle in the programme to be able to catch the right bending angle.

SPECIFICATIONS:

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS – CALL FOR PRICE:

• DIFFERENT NOSE RADIUS SHARPNOSE TOOL
  • Possible nose radius: R1,5 – R2 – R3 – R5 – R10
• 2.36 INCH HIGH SEGMENTED GOAT FOOT TOOL SET 82.67 INCH LONG
• NEW ERFOLD BASIC 2D CNC GRAPHICAL CONTROL SOFTWARE
  • Windows based software specifically designed for folders and %100 owned by Erbend
  • 15.6″ capacitive LED touchscreen controller on swivel arm
  • LBL Editor: You can adjust the bending steps line by line by entering the numeric values of axis targets or measures.
  • 2D part editor: you can create a new bending programme by drawing in graphic mode and visualize in 2D graphical screen
  • You can determine and change the bending sequence on the created part while you are making graphical collision control
  • Capability of choosing material type,thickness,springback,bending correction and creating data base for every type of material type, thickness and length
  • Authorization with password
  • 128 GB hard disk space which allows you to save unlimited data
  • Detailed alarm,tooling and parameters page

The post ERBEND MFH 2115 6.8ft x 0.059 in. CNC Motorized Folder appeared first on Sheet Metal Machines.

STANDART SPECS AND ACCESSORIES:

• UPPER BEAM
• Clamping beam with 4.33 inch opening height without tools and 45° beam geometry
• Thanks to fast eccentric system, clamping speed is increased up to max 3.54 in./sec
• Thanks to its brass and oil-free friction plates on the linear guides, you can work for years without any lubrication or maintenance
• Also thanks to the protective bellows, no dirt or dust is allowed in the swivel parts of this axis
• 29.5 INCH SERVO BACK GAUGE WITH RECTANGULAR SHEET SUPPORT TABLE
• 29.5 inch servo driven back gauge system with feather grooves only
• 29.5 inch long rectangular sheet support table with stainless ball-casters
• Sliders can be pulled back to create space for down flanges at the back of the bottom tool
• SOLID LOWER BEAM (WITHOUT CHANNELS) AND FEATHER GROOVES
• To avoid unwanted scratches and cracks on the painted sheets caused by lower beam channels, we can build the lower beam without channel and also with special design gauging arms produced by flexible feather steel (0,5 mm thick) so that the arms can approach until the end of the lower beam to the edge and can be clamped between the upper beam tool and lower beam tool together with the sheet.
• FOOT PEDAL WITH 3 SWITCHES
• 3 switch foot pedal with panic button function on two steps.
  (Sudden step on left pedal = clamping beam goes up immediately)
  (Sudden step on middle pedal = folding beam and all axis stops immediately)
• VERTICAL OR HORIZONTAL FRONT LIGHT BARRIERS
• For operator safety, front light barriers are located at the left and right front side of the machine, managed by safety PLC and prevent unwanted interventions to avoid accidents. You can choose as horizontal or vertical or you can completely remove the light barriers from your configuration.
• ERFOLD BASIC NUMERIC CONTROLLER SOFTWARE
• Very user friendly, iconic screen layout
• 15.6″ tft panel touchscreen controller on swivel arm
• Windows based Erfold software that allows you to store and reload back ups of the factory settings or saves programmes easily
• 128 gb memory for unlimited receipt storage
• Line by line part programming by entering numerical values of the axes for each step
• Creating, saving, loading parts with different names, materials and sheet thicknesses
• Open or drop hemming function
• Multi radius bending function as by pressing or by bending
• Backgauge finger pause and on/off functions
• Material database control for springback correction and folding beam height correction regarding material type, thickness and length
• Piece counter for lot production
• Manual axis controls, alarm and error indications, machine detailed parameter pages
• Remote service connection via wireless internet
• User authorization with special passwords.
• STANDART TOOLS
• UPPER BEAM PIECE SHARP NOSE TOOL
  • Grinded material, single piece, 20° nose angle
• MANUAL FOLDING BEAM ADJUSTMENT
• Manual height adjustment of folding beam according to the sheet thickness or bending point radius
• Located in left and right side and should be adjusted equally on both sides as thickness x 1 for sharp bending radius or thickness x 1,5 / 2,5 for more oval radius.
• More you lower the folding beam, more you have to increase the bending angle in the programme to be able to catch the right bending angle.
• TOOL HOLDERS
• 2 stacks of tool holders that can carry 2 single piece folding tool or clamping beam sharpnose tool

SPECIFICATIONS:

TECHNICAL PARAMETERS OF 11 AXIS

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS – CALL FOR PRICE:

• 39.37 in. servo backgauge system with feather fingers
• Different radius sharpnose tool
• Erfold Advanced 2D cnc graphical software

• DIFFERENT NOSE RADIUS SHARPNOSE TOOL
• Possible nose radius: R1,5 – R2 – R3 – R5 – R10
• 39.37 INCH SERVO BACKGAUGE AND SHEET SUPPORT TABLE EXTENSION
• ERFOLD ADVANCED 2D CNC GRAPHICAL CONTROL SOFTWARE
• Windows based software specifically designed for folders and %100 owned by Erbend
• 15.6″ capacitive LED touchscreen controller on swivel arm
• LBL Editor: You can adjust the bending steps line by line by entering the numeric values of axis targets or measures.
• 2D part editor: you can create a new bending programme by drawing in graphic mode and visualize in 2D graphical screen
• You can determine and change the bending sequence on the created part while you are making graphical collision control
• Capability of choosing material type, thickness, springback, bending correction and creating data base for every type of material type, thickness and length
• Authorization with password
• 128 GB hard disk space which allows you to save unlimited data
• Detailed alarm, tooling and parameters page

The post ERBEND MFG 3210 10ft x 0.039 in. CNC Motorized Sheet Metal Folding Machine appeared first on Sheet Metal Machines.

STANDART SPECS AND ACCESSORIES:

• UPPER BEAM
• Clamping beam with 4.33 inch opening height without tools and 45° beam geometry
• Thanks to fast eccentric system, clamping speed is increased up to max 3.54 in./sec
• Thanks to its brass and oil-free friction plates on the linear guides, you can work for years without any lubrication or maintenance
• Also thanks to the protective bellows, no dirt or dust is allowed in the swivel parts of this axis
• 29.5 INCH SERVO BACK GAUGE WITH RECTANGULAR SHEET SUPPORT TABLE
• 29.5 inch servo driven back gauge system with feather grooves only
• 29.5 inch long rectangular sheet support table with stainless ball-casters
• Sliders can be pulled back to create space for down flanges at the back of the bottom tool
• SOLID LOWER BEAM (WITHOUT CHANNELS) AND FEATHER GROOVES
• To avoid unwanted scratches and cracks on the painted sheets caused by lower beam channels, we can build the lower beam without channel and also with special design gauging arms produced by flexible feather steel (0,5 mm thick) so that the arms can approach until the end of the lower beam to the edge and can be clamped between the upper beam tool and lower beam tool together with the sheet.
• FOOT PEDAL WITH 3 SWITCHES
• 3 switch foot pedal with panic button function on two steps.
  (Sudden step on left pedal = clamping beam goes up immediately)
  (Sudden step on middle pedal = folding beam and all axis stops immediately)
• VERTICAL OR HORIZONTAL FRONT LIGHT BARRIERS
• For operator safety, front light barriers are located at the left and right front side of the machine, managed by safety PLC and prevent unwanted interventions to avoid accidents. You can choose as horizontal or vertical or you can completely remove the light barriers from your configuration.
• ERFOLD BASIC NUMERIC CONTROLLER SOFTWARE
• Very user friendly, iconic screen layout
• 15.6″ tft panel touchscreen controller on swivel arm
• Windows based Erfold software that allows you to store and reload back ups of the factory settings or saves programmes easily
• 128 gb memory for unlimited receipt storage
• Line by line part programming by entering numerical values of the axes for each step
• Creating, saving, loading parts with different names, materials and sheet thicknesses
• Open or drop hemming function
• Multi radius bending function as by pressing or by bending
• Backgauge finger pause and on/off functions
• Material database control for springback correction and folding beam height correction regarding material type, thickness and length
• Piece counter for lot production
• Manual axis controls, alarm and error indications, machine detailed parameter pages
• Remote service connection via wireless internet
• User authorization with special passwords.
• STANDART TOOLS
• UPPER BEAM PIECE SHARP NOSE TOOL
  • Grinded material, single piece, 20° nose angle
• MANUAL FOLDING BEAM ADJUSTMENT
• Manual height adjustment of folding beam according to the sheet thickness or bending point radius
• Located in left and right side and should be adjusted equally on both sides as thickness x 1 for sharp bending radius or thickness x 1,5 / 2,5 for more oval radius.
• More you lower the folding beam, more you have to increase the bending angle in the programme to be able to catch the right bending angle.
• TOOL HOLDERS
• 2 stacks of tool holders that can carry 2 single piece folding tool or clamping beam sharpnose tool

SPECIFICATIONS:

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS – CALL FOR PRICE:

• 39.37 in. servo backgauge system with feather fingers
• Different radius sharpnose tool
• Erfold Advanced 2D cnc graphical software

• DIFFERENT NOSE RADIUS SHARPNOSE TOOL
• Possible nose radius: R1,5 – R2 – R3 – R5 – R10
• 39.37 INCH SERVO BACKGAUGE AND SHEET SUPPORT TABLE EXTENSION
• ERFOLD ADVANCED 2D CNC GRAPHICAL CONTROL SOFTWARE
• Windows based software specifically designed for folders and %100 owned by Erbend
• 15.6″ capacitive LED touchscreen controller on swivel arm
• LBL Editor: You can adjust the bending steps line by line by entering the numeric values of axis targets or measures.
• 2D part editor: you can create a new bending programme by drawing in graphic mode and visualize in 2D graphical screen
• You can determine and change the bending sequence on the created part while you are making graphical collision control
• Capability of choosing material type,thickness,springback,bending correction and creating data base for every type of material type,thickness and length
• Authorization with password
• 128 GB hard disk space which allows you to save unlimited data
• Detailed alarm,tooling and parameters page

The post ERBEND MFG 2515 8ft x 0.059 in. CNC Motorized Sheet Metal Folding Machine appeared first on Sheet Metal Machines.

SPECIFICATIONS:

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS – CALL FOR PRICE:

• 59 inch servo backgauge system with rectangular sheet support table.
• 98.42 / 126 / 165.35 inch servo backgauge system upgrade with L / T / U shape sheet support table options.
• ERFOLD ADVANCED 2D/3D CNC Graphic Control Software.
• Servo folding beam height adjustment.
• Omega geometry upgrade on lower and folding beam.
• Manual conical backgauge finger.
• Motorized conical backgauge system.
• Pneumatic goat foot tool quick clamping system.
• Manual crowning system.

The post ERBEND MFD 4215 13ft x 0.059 in. Combi Beam Folder appeared first on Sheet Metal Machines.

SPECIFICATIONS:

TECHNICAL PARAMETERS OF 11 AXIS

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS – CALL FOR PRICE:

• 98.42 / 126 / 165.35 inch servo backgauge system upgrade with L / T / U shape sheet support table options
• ERFOLD ADVANCED 2D/3D CNC Graphic Control Software.
• Servo folding beam adjustment.
• Manual crowning system.
• Pneumatic quick goatfoot tool clamping.
• Segmented bottom or folding tools.
• 3.93 inch high segmented goat foot tool set.

• ERFOLD ADVANCED 2D/ 3D CNC GRAPHICAL CONTROL SOFTWARE
• 15.6″ touchscreen all-in one industrial pc controller on swivel arm
• 2D part editor: you can create a new bending programme by drawing or line by line and and visualize in 2D
• 3D editor: You can draw the parts in 3D or you can import 3D step/igs files over your offline software
• You can determine and change the bending sequence on the created part
• 3D simulation of bending to check for collisions and intervene if needed
• Capability of choosing material type, thickness, springback, shortening, bending correction and creating data base for every type of material or lot
• Tool library and edit: You can import, create by drawing and define new tools, save, recall or delete in the library
• Authorization with password
• Real time simulated production page in which you can monitor all axes movements on 3D graphic view of the machine and also numerical values of the axes
• 16 GB hard disk space which allows you to save unlimited bending receipt or tool data
• Detailed alarm and parameters page
• 3.93 INCH HIGH SEGMENTED GOAT FOOT TOOL SET
• MANUAL CROWNING SYSTEM
• On long and thin sheets, in order to prevent the banana shape bends, you just need to adjust the crowning between %25 and %100 to give more support from the middle side of the folding beam
• MOTORIZED FOLDING BEAM ADJUSTMENT (A1-A2 AXIS)
• Motorized and cnc controlled of the folding beam height. Your bending height is calculated automatically according to the parameters and set just before the bend.
• LONGER SHEET SUPPORT TABLE (TO WORK FROM THE FRONT SIDE)
• 59 / 98.42 / 118.11 / 157.48 inch rectangular sheet support table and back gauges
• Front side gauging arms + middle and back side triangle fingers up to 6 sectors
• Movable sliders for down flanges + steady side gauge
• L / T or U SHAPE SHEET SUPPORT TABLE (TO WORK FROM THE BACK SIDE)
• L / T or U shape sheet support table with ball casters.
• Front side gauging arms + middle and back side triangle fingers up to 6 sectors
• PNEUMATIC GOAT FOOT QUICK CLAMPING SYSTEM
• Eliminates the time for tool-setup. No time spent for screwing or unscrewing, just by turning one key, all tools are clamped or unclamped so that you can slide,remove or mount all goat foot tools just in seconds
• VACCUM TABLE WITH SUCTION CUPS
• Thanks to the suction cups placed on the front gauging group;
  • Misalignment of the sheet is avoided.
  • Dropping down of the sheet because of downwards flanges is avoided.
  • No need to support the sheet anymore from the front side during multi radius bends.
  • If the gauging side of the sheet is oval or can not be gauged well to the standard fingers/gauges,you do not need to adjust it again in each bending step.

The post ERBEND MFE 4230 13ft x .118 in. CNC Servo Sheet Metal Folding Machine appeared first on Sheet Metal Machines.