Solid State Time & Weld Relay

• • Assures high quality welds each and every time.

High Capacity Transformer

• • Allows for continuous use for jobs of any size, including 3” Liner.

Weld Rate

• • 15-20 pins per minute continuously. Faster rates are possible based on the operator.

Cables

• • Gun – 15 feet, #4/0 weld cable adn #16/3 control cable.
  • Ground – 5 feet, #4/0 weld cable terminating in a spring loaded, copper alloy clamp.

Capability

• • Welding 1/2″ – 4″ weld pins to 26 – 16 gauge sheet metal.

PowerPoint Weld Pins

• • For peak performance, it is highly recommended using Gripnail’s wide range of PowerPoint weld pins. Each point is precisely formed to provide optimum weld current.
  • A PowerPoint Weld Pin permanently attaches insulation to galvanized steel in the fabrication of HVAC duct work and withstands a tensile pull of at least 120 pounds from sheet metal.

High Capacity Transformer

• • The PowerPinner 7250 was completely designed around the same high capacity transformer that can be found in Gripnail’s floor model line of PowerPinner welders. This delivers the same level of power and quality welds commonly seen in much larger machines.

Pistol Grip Weld Gun

• • The weld gun has a pistol grip style handle with a trigger guard and switch for a more ergonomic working environment. Welding current is not available at the gun until the weld pin contacts the sheet metal and the trigger is pulled.

Chamfered & Recessed Weld Tip

• • The magnetic weld tip is specially designed with a chamfered edge and recessed center to optimize the weld quality of PowerPoint weld pins. The unique characteristics of the PowerPoint weld pin’s noninvasive protruding shank captures and centers the weld pin to ensure consistent loading, while the beveled retaining cap prevents it from shifting off the weld tip when the pin is being set through the insulation. Although the PowerPinner 7250 works with a variety of weld pins, our PowerPoint’s precision manufacturing process assures a trouble free operation with the best quality weld possible.

Low Maintenance

• • As a result of the PowerPinner 7250 solid state circuitry and design, it requires less maintenance.

Simplified Controls

• • A well defined Weld Time control is provided for simple adjustment when changing weld pin sizes or sheet metal gauge on different insulation jobs.
    An easy to read, LED light clearly indicates the power status of the welder, while a different LED provides the welding operation status.
    To activate the welder, simply pull the trigger on the Pistol Grip and the welder will engage.
  • Safety – A high visibility power switch comes standard with a simple to use Lockout/Tagout feature.

SPECIFICATIONS:
Input Voltage: 190-240 VAC 60Hz, 1-Phase, 35 Amp
Electrical Connection: 10 ft, 8/3 Power Cord
Length: 14 in.
Width: 18 in.
Height: 13 in.
Gun Type: Pistol Grip
List Weight: 120 lbs.
Shipping Weight: 154 lbs.
Freight Class: 70

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post GRIP NAIL PowerPinner 7250 Heavy Duty Benchtop Duct Lining Hand Welder appeared first on Sheet Metal Machines.

SPECIFICATIONS:
Country of Manufacture: United States
Top Roll Dia.: 8″
Bottom Roll Dia.: 2.5″
Head Style: Rotating
Mild Steel Capacity: 16 ga.
Throat Depth: 21″
Aluminum Capacity: 14 ga.
Contact Wheel Dia x Width: 8″ x 2″
Lower Die Radius: FLAT, 24″, 8″, 2″
Power: Manual
Shipping Weight: 305 lbs.
Shipping Dimensions: 60″ x 48″ x 80″
Things to Know Before Purchase: This is a bench top machine, but an optional stand is available

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post BAILEIGH EW-21 16 Ga. Bench Top English Wheel appeared first on Sheet Metal Machines.

SPECIFICATIONS:
Motor: 1/2 HP, 1 PH TEFC
Dimensions: 20″ x 20″ x 12″
Platen/ work area: 4″ wide x 6″ long
Disc: 8″
Belt Dimensions: 4″ x 36″
Weight: 180 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post KALAMAZOO S4SWBD 4×36/8 in. Disc Metallurgical Wet Benchtop Belt Sander appeared first on Sheet Metal Machines.

STANDARD EQUIPMENT:

• Cast Iron Base
• Handwheel
• Ram
• Notched Table Plate
• Counter weight

SPECIFICATIONS:
Capacity: 3 Tons
Leverage Ratio: 48:1
Ram Size: 1-1/4 x 1-1/4 x 16-1/2 in.
Maximum Diameter Work: 14 in.
Throat: 7 in.
Largest Arbor: 2 in.
Maximum ram to table: n/a
Minimum ram to table: n/a
Capacity Over Table: 11-1/2 in.
Capacity Over Table Plate: 10-3/4 in.
Base Length: 18 in.
Base Width: 7-1/4 in.
Height: 19 in.
Weight: 145 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS:
Pedestal Only for No. 1-1/2 Press: $575.00

The post DAKE Ratchet Leverage Arbor Press MODEL 1-1/2 appeared first on Sheet Metal Machines.

10 Inch Metallurgical Wet Saw Benefits:

• • Ensure Accurate Quality Control: Precise cuts give you reliable data for material analysis and inspection.
  • Save Time on Sample Prep: Efficient cutting and easy cleanup speed up steel inspection in manufacturing by ensuring samples are ready for analysis faster.
  • Protect Valuable Samples: Minimize heat damage and deformation, preventing wasted material, inaccurate results, and potential production delays.
  • Adapt to a Variety of Materials: Handle different metals and alloys used in your manufacturing processes with confidence.
  • Verify Incoming Material Quality: Check purchased materials against specifications before they enter production.
  • Catch Production Issues Early: Regular sampling and testing can reveal potential problems before they cause costly defects.
  • Maximize Lab Efficiency: Faster sample prep frees up technicians, streamlining the workflow for steel inspection and beyond.
  • Achieve Reliable Test Results: Accurate cuts are essential for valid metallurgical analysis.
  • Expand Your Lab’s Capabilities: Handle a wider range of materials and sample types.
  • Prevent Costly Production Errors: Inaccurate quality control can lead to defective products, recalls, and damage to your reputation.
  • Streamline Your QC Process: Faster sample prep means quicker identification of issues and more efficient workflows.
  • Maintain Production Schedules: Reliable QC helps avoid unexpected delays caused by material failures and rework.
  • Safeguard Your Reputation: Consistent quality control protects your brand’s image and customer trust.
  • Justify Your Equipment Investment: A durable, high-quality saw delivers long-term ROI for the lab or manufacturing facility.

SPECIFICATIONS:
Abrasive blade diameter: 10 in.
Material capacity: 1.5 in. solids, 2.5 in. pipe
Motor : 2HP, 3Ph, 220 and or 440 volts (specify)
3PH FLA: 220V 5.2 amps and 440V 2.6 amps
Pump FLA: 115V 2.4 amps
Tank capacity: 6 gallons
Machine RPM: 3450
Arbor size: 5/8 in. LH spindle arbor, optional: 1.250 in. or 32mm
Controls: Magnetic controls
Construction: all steel
Shipping dimensions without stand: L 37 x W 47 x H 39 in.
Shipping dimensions with stand: L 48 x W 35 x H 69 in.
Shipping weight without stand: 500 lbs.
Shipping weight with stand: 700 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS:
12-WBT: K10WBT industrial steel stand – $CALL

The post KALAMAZOO K10WBT 10 in. Wet Abrasive Benchtop Saw appeared first on Sheet Metal Machines.

• 25” throat depth can accommodate many different applications.
• Up to a 4” stroke.
• Runs on 110-volt power and will work at virtually any site in North America.
• Includes slug ejector.
• With optional tooling, you can use this press for hole punching, flaring, and shearing.
• Electro-welded steel plate construction reduces flexing to a minimum and maintains accuracy when you’re working at maximum capacity.
• Covered by a 1-year parts warranty as well as lifetime technical support.

SPECIFICATIONS:
Capacity: 10 Tons
Ram Size: 4″
Throat Depth: 25″ x 6″
Power: 110V
Shipping Dimensions (inches): 53 x 42 x 24
Shipping Weight: 900 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post BAILEIGH BP-10E 10 Ton Metal Bench Press appeared first on Sheet Metal Machines.

SPECIFICATIONS:
Shear Capacity Round: .236″
Capacity Flat Bar: 2.75″ x .236″
Capacity Sheet Steel: 3/16″
Blade Length: 8″
Power Requirement: Manual
Shipping Dimensions (L/W/H): 21″ x 7″ x 19″
Shipping Weight: 45 lbs

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post BAILEIGH MPS-8G 3/16 in. Bench Mounted Multi-Purpose Manual Sheet Metal Shear appeared first on Sheet Metal Machines.