Rollformers - Sheet Metal Machines

JAG TDC 18 Ga. RollFormer

smm-admin — Tue, 23 May 2023 19:45:50 +0000

Roll your own flanges and pocket the savings.
The TDC Rollformer has 12 forming stations and produces TDC flanges at speeds of up to 60 feet per minute (18.3m/min)!
JAG quality construction with an industrial motor and gearbox; high precision bearings; heavy-duty three zone chassis; plate head construction; hardened and ground roll shafts all protected with JAG’s top-quality primer and paint finish.
Optional rolls are available for TDC clip production (22 gauge).

SPECIFICATIONS:

Capacity: 18 – 24 gauge (0.70 – 1.31 mm)
Depth of Pocket: 1-7/8” (47.6 mm) / 2-1/8” (54.0 mm) for Clip
Speed: 50 fpm (15.2 m/min)
Motor: 10 HP (7 kw) – 230 volts, 60 cycle, 3 phase, AC, 1800 RPM
Dimensions: 117”L x 33W” x 46”H (2950 x 830 x 1150 mm)
Weight: 2,090 lbs. (950 kg)

OPTIONAL ITEMS:
Optional TDC Clip Roll Set: $CALL

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post JAG TDC 18 Ga. RollFormer appeared first on Sheet Metal Machines.

JAG TDF 16 Ga. RollFormer

smm-admin — Tue, 23 May 2023 19:45:50 +0000

Save time and money forming TDF flanges the easy way.
The 16-Station TDF Rollformer unitizes steel construction, high yield and tensile strength shafts, and “off the shelf” ball bearings.
Other key features and benefits include:
Heavy-duty Mod4 (6 pitch) gears.
Extended roll shafts for mounting auxiliary rolls (one side outboard only).
Optional tooling sets available for outboard mounting.
All steel forming head, hardened steel infeed guide, and hardened steel forming rolls mounted on turned and ground spindles.
No adjustments necessary when going from 26 gauge to 18 gauge material.
Includes Snap Flange Feature.
Comes standard with short parts feeder for 6 inch (152 mm) minimum lengths (requires no manual adjustment or removal of machine guards when running short parts).
Optional rolls available for TDF clip production (20 gauge).

SPECIFICATIONS:
Capacity: 16 – 26 gauge (0.55 – 1.31 mm)
Depth of Pocket: 1-11/16” (42.9 mm)
Speed: 50 fpm (15.2 m/min)
Motor: 7-1/2 HP (5.5 kw) – 230 volts,
60 cycle, 3 phase, AC, 1800 RPM
Dimensions: 141”L x 33W” x 46”H (3570 x 830 x 1150 mm)
Weight: 2,420 lbs. (1,100 kg)

OPTIONAL ITEMS:
Optional TDF Clip Roll Set: $CALL

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post JAG TDF 16 Ga. RollFormer appeared first on Sheet Metal Machines.

TIN KNOCKER TDP 18 Ga. Roll Former

smm-admin — Tue, 23 May 2023 23:36:39 +0000

(Produces either TDC or TDF flanges).

At last, an affordable, full service, high quality transverse duct connector machine! This 14 station roll former comes standard with TDC or TDF Rolls, Slitter and Clip Rolls outboard. This T-D-P roll former will roll sheet metal into leak proof, sealable TDC or TDF flanges at speeds of up to 50 fpm, automatically! Start saving time and money by forming your own TDC or TDF flanges – with their snap on corners – and eliminate spot welding altogether. Buyer must specify which set of transverse duct connector rolls is wanted on the machine (TDC or TDF). Slitting and Clip Rolls come on all TDP roll formers.

SPECIFICATIONS:
Capacity: T-D-P 18-24 ga. for T-D-P Uses approx. 1-7/8″ of material on T-D-P
50 feet per minute T-D-P Clip (min. length 20″) 22 ga. 2-1/8″ 2-1/8″
Forming Sections: 14
Shaft Diameter: 1.25″
Passline: 38.625″
Forming Speed: 50 fpm
Dimensions: (LxWxH) 38″ x 136.75″ x 46″
Weight: 3,450 lbs

OPTIONAL ITEMS:
Single Phase 1HP Motor: $850.00

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post TIN KNOCKER TDP 18 Ga. Roll Former appeared first on Sheet Metal Machines.