• This is a simple, easy to use 3 axes CNC control vertical mill. Ball screws and servo drives are installed for longitudinal and cross travel. 3 axes Digital Readout System are installed on the table, saddle and quill. The FAGOR CNC has G code and conversational type programming with Teach-In Mode. The CNC system is built on the top quality SHARP vertical mills Model LMV, LMV-50 and LMV-49-DVS frame.
• (LMV-FC2) 9 x 42” table, 11 x 25×5” travel, vari speed
• (LMV-50-FC2) 9 x 50” table, 11 x 32 x 5” travel, vari speed
• (LMV-49-DVS-FC2) 9 x 49” table, 11 x 31 x 5” travel, Digital Vari speed
• FAGOR 8055i CNC 3 axes control (Longitudinal, Cross, quill)
• G code and conversational type programming
• 3 axes precision ball screws
• Safety handwheels
• Auto lube system
• 3 axes Digital Readout System (table, saddle, quill)
• Fagor Turnkey CNC System w/Software and Hardware:
  • 10.4” color monitor
  • 512 MB compact flash, 1 MB RAM
  • Conversational and G-code programming with teach-in mode.
  • On-board profile editor for easy blue print programming
  • Complex profiles (mini CAD/CAM), 3 D contouring capabilities
  • Communication includes RS-232, DNC, USB and Ethernet card (option)

STANDARD ACCESSORIES:

• FAGOR 8055i 3 axes CNC system
• 3 axes ball screws and servo drives
• Auto lube system
• Safety h andwheels
• 3 axes Digital Readout system
• Cross Way cover

Item/Model: SHARP LMV-FC-3 Series: ENTER MODEL#

The post SHARP LMV-FC-3 Series 3-Axis CNC Vertical Knee Mills appeared first on Sheet Metal Machines.

• This is a simple, easy to use 2 axes CNC control vertical mill. Ball screws and servo drives are installed for longitudinal and cross travel. 3 axes Digital Readout System are installed on the table, saddle and quill. The FAGOR CNC has G code and conversational type programming with Teach-In Mode. The CNC system is built on the top quality SHARP vertical mills Model LMV, LMV-50 and LMV-49-DVS frame.
• LMV-FC2) 9 x 42” table, 11 x 25×5” travel, vari speed
• (LMV-50-FC2) 9 x 50” table, 11 x 32 x 5” travel, vari speed
• (LMV-49-DVS-FC2) 9 x 49” table, 11 x 31 x 5” travel, Digital Vari speed
• FAGOR 8055i CNC 2 axes control (Longitudinal, Cross)
• G code and conversational type programming
• 2 axes precision ball screws
• Safety handwheels
• Auto lube system
• 3 axes Digital Readout System (table, saddle, quill)
• Fagor Turnkey CNC System w/ Software and Hardware:
  • 10.4” color monitor
  • 512 MB compact flash, 1 MB RAM
  • conversational and G-code programming with teach-in mode.
  • On-board profile editor for easy blue print programming
  • complex profiles ( mini CAD/CAM), 3 D contouring capabilities
  • Communication includes RS-232, DNC, USB and Ethernet card ( option)

STANDARD ACCESSORIES:

• FAGOR 8055i 2 axes CNC system
• 2 axes ball screws and servo drives
• Auto lube system
• Safety h andwheels
• 3 axes Digital Readout system
• Cross Way cover

Item/Model: SHARP LMV-FC-2 Series: ENTER MODEL#

The post SHARP LMV-FC-2 Series 2-Axis CNC Vertical Knee Mills appeared first on Sheet Metal Machines.

• This model Vertical Knee Mill is constructed with box ways instead of dove tail ways. The model has many unique features compared with most of the similar machines on the market.
• The quill is CNC ground to a mirror finish and chromed to fit the housing resulting in close to jig bore accuracy for quill downfeed.
• Tapered gibs installed on the ways allows easy adjustment for long term usage.
• The feed handles are designed to spin free which eliminates the friction between the operator’s hand and the feed handle.
• The bottom of the saddle, instead of the top of the knee ways, which rides on the knee, is hand scraped for better oil retention and prevent dirt and chips from embedded in the knee ways.
• 10 x 54 ins table, 16.3 x 39 ins travel
• R-8 spindle, 3 hp, variable speed (60-4,500 rpm)
• Spindle runout of no more than 0.0002 ins TIR
• Hardened and ground box ways, column, base
• Head tilt side to side, up and down
• One shot lubrication with back flow valve
• Tapered gibs for adjustment
• Box Ways: Hardened and Ground box ways on the vertical column and base offer extra support under heavy cutting conditions.
• Patented Knuckle Head design: The New Patented Knuckled-Head Design prevents the head from slipping. The Sharp mills have a knuckle which uses 6 bolts, 3 each side, fitted into circular T-slots with matching nuts securing them from the outside. It locks the head in place for better accuracy and performance than the old design using only 3 bolts to squeeze the casting to hold the head without the T-slots. (Patent No. 5044054)
• Patented sliding vari disc movement: Easy Access Lubricating Shaft is designed with an oil channel in the center that is fed by a grease fitting at the lower end for longer motor shaft life. (Patent No. 2848)
• Improved design of Backlash Eliminator: Backlash Eliminator By Double Nut Design replaces the older design that squeezes a split nut to get rid of backlash. Sharp is the first one to use a double nut design that keeps the feed screw in contact with a pair of bronze nuts. Using a custom tool supplied with the mill, the feed nuts are adjusted to control backlash and held tight with a retaining nut and locking ring.

STANDARD ACCESSORIES:

• One Shot Lube System
• Hard-Chromed Ways
• Front and Rear Rubber Way Covers
• Tool box with tools
• Wired 220V or 440V (Specify)

Item/Model: SHARP TMV-1

The post SHARP TMV-1 Vertical Knee Mill appeared first on Sheet Metal Machines.

• This model is constructed with box ways. The vertical head is equipped with Digital Variable Speed.
• This model has many unique features compared with most of the similar machines on the market.
• The quill is CNC ground to a mirror finish and chromed to fit the housing resulting in close to jig bore accuracy for quill downfeed.
• Tapered gibs installed on the ways allows easy adjustment for long term usage.
• The feed handles are designed to spin free which eliminates the friction between the operator’s hand and the feed handle.
• The bottom of the saddle, instead of the top of the knee ways, which rides on the knee, is hand scraped for better oil retention and prevent dirt and chips from embedded in the knee ways.
• 10 x 54 ins table, 16.3 x 39 ins travel
• R-8 spindle, 3 hp ,
• Digital Variable Speed (60-4,500 rpm)
• Spindle runout of no more than 0.0002” TIR
• Hardened and ground box ways, column, base
• Head tilt side to side, up and down
• One shot lubrication with back flow valve
• Tapered gibs for adjustment
• Dual clamps on knee and saddle that locks the knee and table evenly to the column and saddle to avoid skewing. Handles on the clamp are adjustable to 12 different positions.
• Box Ways: Hardened and Ground box ways on the vertical column and base offer extra support under heavy cutting conditions.
• Digital Variable Speed Head:
  • Easy speed change. Just turn the knob
  • Machine works on Single Phase or 3 phase motor
  • Low voltage control
  • Safety feature includes preventing self-start after power failure of E stop
• Better motor shaft support: Roller Bearing Support at the bottom of the motor shaft ensures proper loading, support and alignment of the spindle. It also prevents the distortion of the belts due to tension from long years of milling operation.
• Improved design of Backlash Eliminator: Backlash Eliminator By Double Nut Design replaces the older design that squeezes a split nut to get rid of backlash. Sharp is the first one to use a double nut design that keeps the feed screw in contact with a pair of bronze nuts. Using a custom tool supplied with the mill, the feed nuts are adjusted to control backlash and held tight with a retaining nut and locking ring.
• Patented Knuckle Head design: The New Patented Knuckled-Head Design prevents the head from slipping. The Sharp mills have a knuckle which uses 6 bolts, 3 each side, fitted into circular T-slots with matching nuts securing them from the outside. It locks the head in place for better accuracy and performance than the old design using only 3 bolts to squeeze the casting to hold the head without the T-slots. (Patent No. 5044054)

STANDARD ACCESSORIES:

• One Shot Lube System
• Hard-Chromed Ways
• Front and Rear Rubber Way Covers
• Tool box with tools
• Wired 220V or 440V (Specify)

Item/Model: SHARP TMV-DVS

The post SHARP TMV-DVS Vertical Knee Mill appeared first on Sheet Metal Machines.

• This model is equipped with Digital Variable Speed for easy change of spindle speeds.
• The model has many unique features compared with most of the similar machines on the market. The quill is CNC ground to a mirror finish and chromed to fit the housing resulting in close to jig bore accuracy for quill downfeed. Tapered gibs installed on the ways allows easy adjustment for long term usage. The feed handles are designed to spin free which eliminates the friction between the operator’s hand and the feed handle. The bottom of the saddle, instead of the top of the knee ways, which rides on the knee is hand scraped for better oil retention and prevent dirt and chips from embedded in the knee ways.
• 9 x 49 ins table, 12 x 36.6 in. travel
• Digital Vari speed (DVS), speed change by turning a knob, with digital display of spindle speed
• R-8 spindle, 3 hp , speed (60-4,500 rpm)
• Spindle runout of no more than 0.0002 ins TIR
• Hard chromed ways provide long wear resistance
• Head tilt side to side, up and down
• One shot lubrication with back flow valve
• Tapered gibs for adjustment
• Dual clamps on knee and saddle that locks the knee and table evenly to the column and saddle to avoid skewing. Handles on the clamp are adjustable to 12 different positions.
• Digital Variable Speed Head:
  • Easy speed change. Just turn the knob
  • Machine works on Single Phase or 3 phase motor
  • Low voltage control
  • Safety feature includes preventing self-start after power failure of E stop
• Improved design of Backlash Eliminator: Backlash Eliminator By Double Nut Design replaces the older design that squeezes a split nut to get rid of backlash. Sharp is the first one to use a double nut design that keeps the feed screw in contact with a pair of bronze nuts. Using a custom tool supplied with the mill, the feed nuts are adjusted to control backlash and held tight with a retaining nut and locking ring.
• Patented Knuckle Head design: The New Patented Knuckled-Head Design prevents the head from slipping. The Sharp mills have a knuckle which uses 6 bolts, 3 each side, fitted into circular T-slots with matching nuts securing them from the outside. It locks the head in place for better accuracy and performance than the old design using only 3 bolts to squeeze the casting to hold the head without the T-slots. (Patent No. 5044054)
• Better motor shaft support: Roller Bearing Support at the bottom of the motor shaft ensures proper loading, support and alignment of the spindle. It also prevents the distortion of the belts due to tension from long years of milling operation.
• Crank Handle Improvements: Thrust Bearings mounted at the end of the table and saddle pre-load the feed screw, eliminating end play for precisely controlled lateral movements.

STANDARD EQUIPMENT:

• One Shot Lube System
• Hard-Chromed Ways
• Front and Rear Rubber Way Covers
• Tool box with tools
• Wired 220V or 440V (Specify)

Item/Model: SHARP LMV-49-DVS

The post SHARP LMV-49-DVS Vertical Knee Mill appeared first on Sheet Metal Machines.

Item/Model: BIRMINGHAM BPS-1649

The post BIRMINGHAM Step Pulley Vertical Knee Mill 16 Speed BPS-1649 appeared first on Sheet Metal Machines.

• Taiwan Head / China Body

Item/Model: BIRMINGHAM BPV-4KV-C

The post BIRMINGHAM Vertical Knee Mill NT40 Taper BPV-4KV-C appeared first on Sheet Metal Machines.

STANDARD EQUIPMENT:

• 1 MICRON (UM) GLASS SCALE FEEDBACK, ALL AXIS
• AUTO LUBE, NEW PRECISION GROUND BALL SCREWS
• Harden & Ground Ways
• Harden & Ground Table
• Quill Heat Treat Hardened & Chromed
• Acurite MillPwr CNC Control
• Auto Lubrication

SPECIFICATIONS:
MODEL: LCTM-1 3X
Table Size: 10″ x 54″
Max Table Load: 990 lbs.
X Axis Travel: 33″
Y Axis Travel: 16″
Z Axis Travel (quill): 5″
T-Slots: 3 x 0.625″ x 2.5″
Ram Travel: 18.5″
Knee Travel: 15.3″
Throat Distance: 9.6″ ~ 28.1″
Spindle to Table Top: 5.31″ ~ 20.7″
Spindle RPM: 60-4500
Quill Feeds: 0.0016″/0.0031″/0.0063″
Spindle Nose: R-8 or #30 NST
Main Motor: 3 HP
Voltage: 230/460V AC ~ 3 PH
Dimensions: 82″ x 80″ x 90″
Weight: 3,500 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS:

• AC Inverter Drive 230V: $1,500
• W-Axis Scale on Knee: $1,250
• AMI Deluxe Option … (FAGOR 8055i no charge): $3,300
• Single Phase Spindle (Not AC): $300
• AC Inverter Drive 460V: $250

The post ACRA LCTM-1 10×54 in. 3-Axis Vertical Milling Machine w/Acu-Rite MillPower Controller appeared first on Sheet Metal Machines.

STANDARD EQUIPMENT:

• Quill Heat Treated, Hardened & Chromed
• Hardened Ground Way
• One Shot Lubrication
• Meehanite Casting

SPECIFICATIONS:
MODEL: LCTM1
Table Size: 10″ x 54″
Max Table Load: 990 lbs.
X Axis Travel: 39″
Y Axis Travel: 16.3″
Z Axis Travel (quill): 5″
T-Slots: 3 x 0.625″ x 2.5″
Ram Travel: 18.5″
Knee Travel: 15.3″
Throat Distance: 9.6″ ~ 28.1″
Spindle to Table Top: 5.31″ ~ 20.7″
Spindle RPM: 60-4500
Quill Feeds: 0.0016″/0.0031″/0.0063″
Spindle Nose: R-8 or #30 NST
Main Motor: 3 HP
Voltage: 230/460V AC ~ 3 PH
Dimensions: 67″ x 80″ x 87″
Weight: 3,000 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post ACRA LCTM1 10×54 in. Vertical Variable Speed Milling Machine appeared first on Sheet Metal Machines.

STANDARD EQUIPMENT:

• 1 MICRON (UM) GLASS SCALE FEEDBACK, ALL AXIS
• AUTO LUBE, NEW PRECISION GROUND BALL SCREWS
• Chrome Way
• Harden & Ground Table
• Quill Heat Treat Hardened & Chromed
• Acurite MillPwr CNC Control
• Auto Lubrication

SPECIFICATIONS:
MODEL: LCM50 3X
Table Size: 9″ x 50″
Max Table Load: 550 lbs.
X Axis Travel: 35″
Y Axis Travel: 12″
Z Axis Travel (quill): 5″
T-Slots: 3 x 0.625″ x 2.5″
Ram Travel: 12″
Knee Travel: 16″
Throat Distance: 6.75″ ~ 18.75″
Spindle to Table Top: 0 ~ 18.5″
Spindle RPM: 60-4500
Quill Feeds: 0.0015″ – 0.003″ -0.006″
Spindle Nose: R-8 or #30 NST
Main Motor: 3 HP
Voltage: 230/460V AC ~ 3 PH
Dimensions: 78″ x 71″ x 96″
Weight: 3,000 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS:

• AC Inverter Drive 230V: $1,500
• W-Axis Scale on Knee: $1,250
• AMI Deluxe Option … (FAGOR 8055i no charge): $3,300
• Single Phase Spindle (Not AC): $300
• AC Inverter Drive 460V: $250

The post ACRA LCM50-3X 9×50 in. 3-Axis Vertical CNC Milling Machine w/Acu-Rite MillPower Controller appeared first on Sheet Metal Machines.