• ISO 9001 certified
• One handle for pinch roll clamping
• One handwheel for bending roll up/down
• Cone attachment to make various size cone parts
• Heavy welded all steel construction for maximum rigidity
• Silence electrical motor
• Quick release top roller
• Two rolls are driven
• Precision ground rollers
• 1” roll opening
• All three rolls are made of high grade alloy steel, hardened
• All rolls run forward and reverse
• Safety type removable foot pedal
• Overload protection and disconnect switch
•  Not intended for rolling rods in high production (see our PRB-model)
• One year warranty for parts

STANDARD EQUIPMENT

• Cone attachment
• Electrical cabinet
• Removable safety foot pedal

SPECIFICATIONS:

The post GMC PSR-5014N-1ph 50 in. x 14ga. Powered Slip Roll | 1-Phase appeared first on Sheet Metal Machines.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

Machine Photo May Include Optional Equipment
Product image is only a representation, actual product appearance may differ slightly

FEATURES

• Take your sheet metal work to the next level with the GMC Hemming Forming Machine, a reliable and versatile solution for professional fabricators. Designed for precision and durability, this machine is built to handle your hemming needs with ease, efficiency, and consistency.
• ISO 9001 certified
• 4HP Heavy Duty AC main motor, 220V, 3 phase
• Heavy welded all steel construction for maximum rigidity
• One side forms Flattened Hem
• One side forms Open Hem
• One year warranty for parts

STANDARD INCLUDED EQUIPMENT

• One set of 9 pairs rolls form Flattened Hem
• One set of 9 pairs rolls form Open Hem

The post GMC PL-18HEM 18 ga. Hemming Forming Machine appeared first on Sheet Metal Machines.

• ISO 9001 certified
• One handle for pinch roll clamping
• One handwheel for bending roll up/down
• Cone attachment to make various size cone parts
• Heavy welded all steel construction for maximum rigidity
• Silence electrical motor
• Quick release top roller
• Two rolls are driven
• Precision ground rollers
• 1″ roll opening
• All three rolls are made of high grade alloy steel, hardened
• All rolls run forward and reverse
• Safety type removable foot pedal
• Overload protection and disconnect switch
• One year warranty for parts

STANDARD EQUIPMENT:

• • Cone attachment
  • Electrical cabinet
  • Removable safety foot pedal

SPECIFICATIONS:

The post GMC PSR-5016N-1PH 50 in. x 16 ga. Powered Slip Roll Machine | 1-phase appeared first on Sheet Metal Machines.

• ISO 9001 certified
• One handle for pinch roll clamping
• One handwheel for bending roll up/down
• Cone attachment to make various size cone parts
• Heavy welded all steel construction for maximum rigidity
• Silence electrical motor
• Quick release top roller
• Two rolls are driven
• Precision ground rollers
• 1” roll opening
• All three rolls are made of high grade alloy steel, hardened
• All rolls run forward and reverse
• Safety type removable foot pedal
• Overload protection and disconnect switch
•  Not intended for rolling rods in high production (see our PRB-model)
• One year warranty for parts

STANDARD EQUIPMENT

• • Cone attachment
  • Electrical cabinet
  • Removable safety foot pedal

SPECIFICATIONS

The post GMC PSR-5016N-3PH 50 in. x 16 ga. Powered Slip Roll Machine | 3-phase appeared first on Sheet Metal Machines.

STANDARD EQUIPMENT:

• Cone attachment
• Electrical cabinet
• Removable safety foot pedal

SPECIFICATIONS:
Rolling Capacity: Mild steel: 50 in. x 14 Ga.
Rolling Capacity: Stainless Steel: 50 in. x 18 Ga.
Rolling Capacity: Soft aluminum: 50 in. x 10 Ga.
Min. thickness capacity: 50 in. x 26 Ga.
Rolls size, length x diameter: 50 x 3 in.
Min. roll bending diameter capacity: 3-1/2 in.
Roll Speed: 201 in. / min
Rolls opening: 1/4 in.
(3) Grooves size: 5/16 in., 3/8 in., 1/2 in.
Main Motor: 2 HP, 220V, 1 phase
Machine Dimensions: 68 x 32 x 49 in.
Net Weight: 985 lbs

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post GMC PSR-5014E-1PH 4 ft x 14 ga. Power Slip Roll Machine | 1-Phase appeared first on Sheet Metal Machines.

SPECIFICATIONS:
Maximum thickness of material processed: 20 gauge or lighter
Electrical: Single Phase, 110 Volt, 15amp
Dimensions: Approx 46 x 44 x 31 in.
Shipping weight: 350 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Limited

The post TIN KNOCKER TK36 20 ga. x 36 in. Button Punch Cheek Bender appeared first on Sheet Metal Machines.

STANDARD ITEMS:

• Standard rolls for Germany female lock, installed
• Standard rolls for Germany male lock, installed

SPECIFICATIONS:
Capacity
Germany female lock: 26 Ga. to 18 Ga.
Germany male lock: 26 Ga. to 18 Ga.

Depth of pocket: 1/2 in.
Feeding speed: 23 FPM
Main motor: 2 HP, 110V
Amperage draw: 15 Amp
Weight Approx: 517 lbs.
Machine dimensions, LxWxH: 42 x 22 x 43 in.
Machine shipping dimensions, LWH: 43 x 25 x 46 in.

OPTIONAL ITEMS:
RAR-18E: Right Angle Roll set : 1/4”, 3/8” & 1/2” – $995.00

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post GMC PL-18C 18 Ga. Pittsburgh Locking Forming Machine w/German Locks for Round Ducting appeared first on Sheet Metal Machines.

Solid State Time & Weld Relay

• • Assures high quality welds each and every time.

High Capacity Transformer

• • Allows for continuous use for jobs of any size, including 3” Liner.

Weld Rate

• • 15-20 pins per minute continuously. Faster rates are possible based on the operator.

Cables

• • Gun – 15 feet, #4/0 weld cable adn #16/3 control cable.
  • Ground – 5 feet, #4/0 weld cable terminating in a spring loaded, copper alloy clamp.

Capability

• • Welding 1/2″ – 4″ weld pins to 26 – 16 gauge sheet metal.

PowerPoint Weld Pins

• • For peak performance, it is highly recommended using Gripnail’s wide range of PowerPoint weld pins. Each point is precisely formed to provide optimum weld current.
  • A PowerPoint Weld Pin permanently attaches insulation to galvanized steel in the fabrication of HVAC duct work and withstands a tensile pull of at least 120 pounds from sheet metal.

High Capacity Transformer

• • The PowerPinner 7250 was completely designed around the same high capacity transformer that can be found in Gripnail’s floor model line of PowerPinner welders. This delivers the same level of power and quality welds commonly seen in much larger machines.

Pistol Grip Weld Gun

• • The weld gun has a pistol grip style handle with a trigger guard and switch for a more ergonomic working environment. Welding current is not available at the gun until the weld pin contacts the sheet metal and the trigger is pulled.

Chamfered & Recessed Weld Tip

• • The magnetic weld tip is specially designed with a chamfered edge and recessed center to optimize the weld quality of PowerPoint weld pins. The unique characteristics of the PowerPoint weld pin’s noninvasive protruding shank captures and centers the weld pin to ensure consistent loading, while the beveled retaining cap prevents it from shifting off the weld tip when the pin is being set through the insulation. Although the PowerPinner 7250 works with a variety of weld pins, our PowerPoint’s precision manufacturing process assures a trouble free operation with the best quality weld possible.

Low Maintenance

• • As a result of the PowerPinner 7250 solid state circuitry and design, it requires less maintenance.

Simplified Controls

• • A well defined Weld Time control is provided for simple adjustment when changing weld pin sizes or sheet metal gauge on different insulation jobs.
    An easy to read, LED light clearly indicates the power status of the welder, while a different LED provides the welding operation status.
    To activate the welder, simply pull the trigger on the Pistol Grip and the welder will engage.
  • Safety – A high visibility power switch comes standard with a simple to use Lockout/Tagout feature.

SPECIFICATIONS:
Input Voltage: 190-240 VAC 60Hz, 1-Phase, 35 Amp
Electrical Connection: 10 ft, 8/3 Power Cord
Length: 14 in.
Width: 18 in.
Height: 13 in.
Gun Type: Pistol Grip
List Weight: 120 lbs.
Shipping Weight: 154 lbs.
Freight Class: 70

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post GRIP NAIL PowerPinner 7250 Heavy Duty Benchtop Duct Lining Hand Welder appeared first on Sheet Metal Machines.

SPECIFICATIONS:
Maximum thickness of material processed: 0.030 in.
Maximum crimp width: 1-1/2 in.
Bead diameter outside, large bead: 1/4 in.
Bead diameter outside, small bead: 1/8 in.
Maximum distance from bead center to edge: 1-1/2 in.
Thickness range of bench top for mounting: 3/4 to 3-1/2 in.
Dimensions Approx.: 26 x 16 x 12 in.
Shipping weight: 28 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post TIN KNOCKER TK 2 in 1 Crimper Beader appeared first on Sheet Metal Machines.

SPECIFICATIONS:
Capacity: 25 KVA or 35 KVA Capacity: 2 pcs 14 gauge
Voltage: 220 Volts Single Phase 80 Amp, 440 Volts Single Phase 40 Amp (must specify)
Recirculator: None, ProCool II Coolant Recirculator
Dimensions: 40″ x 12″ x 50″
Weight: 300 lbs. (425 lbs. crated)

OPTIONAL ITEMS:
Optional ProCool II coolant recirculator available (call for price)

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post PROFAB 25KVA Air Operated Fully Automatic Spot Welder appeared first on Sheet Metal Machines.