• • ESA S929 CNC Control w/ 10″ High Resolution Screen with Offline Programming Capability
  • Servo X and Y Axes – Faster, More Accurate, Quieter
  • Linear Encoder – More Precise; Allows for top dead center and muting point to be programmed at
    CNC control
  • Linear Guide Rail on Back Gauge – Helps keep the back gauge aligned
  • Torsion Bar Design for Parallelism
  • Heavy Duty Forged Hydraulic Cylinders
  • Adjustable Dwell Timing
  • Light Curtains on Front and Photo-Electric Eyes on Rear of Machine for Safety
  • All 13′ Press Brakes Come with Auto-Crowning as a Standard Feature; Can be added to other models. See optional accessories.
  • Goose-neck Punch and Multi-Opening Die for up to 90° Forming
  • Space Between Ram Tool Clamps – Allows for deep box bending
  • Our standard ram clamps and optional quick release ram clamps will hold all punch tangs.
  • Our bed has a slot for the standard die tang shown in photos. Also, bed tooling without tang can be held with the included capture clamps.
  • Our standard ram clamp for all punch tangs shown in photos have two allen- head cap screws to secure tools.
  • Our optional ram clamps for all punch tangs are shown in photos. Lever action allows for quick tool change.
  • Special Note: The goose-neck punch and multi-opening die included are general purpose tools. Precision tooling should be purchased to meet your specific needs. There is no warranty on this tooling.
  • The Gooseneck punch tool sections included, are full length of ram. Multi-opening V-Die for up to 90 degree forming included, full length of bed. Die lifting rings included.

SPECIFICATIONS:

OPTIONAL ITEMS:

• Upgrade to Fiessler Akas II Laser Guarding (Substitute for Sick deTec 4) … $5,995.00
• Add Third Axis (Back Gauge Height controlled from operator panel.) …. $4,995.00
• CNC Controlled Mechanical Auto Crown …………………………………………….. $6,495.00
• Upgrade to Cam-Lever Quick Action Ram Clamps …………………………….. $6,495.00
• Training in our Memphis, TN Facility ……………………………………………………. $750.00
• Training at customer site, more than 300 miles from Memphis: (If outside continental USA, please call for quote) …. $4,995.00

The post U.S. INDUSTRIAL USHB390-10C 390 Ton x 10ft CNC Hydraulic Press Brake appeared first on Sheet Metal Machines.

• • ESA S929 CNC Control w/ 10″ High Resolution Screen with Offline Programming Capability
  • Servo X and Y Axes – Faster, More Accurate, Quieter
  • Linear Encoder – More Precise; Allows for top dead center and muting point to be programmed at
    CNC control
  • Linear Guide Rail on Back Gauge – Helps keep the back gauge aligned
  • Torsion Bar Design for Parallelism
  • Heavy Duty Forged Hydraulic Cylinders
  • Adjustable Dwell Timing
  • Light Curtains on Front and Photo-Electric Eyes on Rear of Machine for Safety
  • All 13′ Press Brakes Come with Auto-Crowning as a Standard Feature; Can be added to other models. See optional accessories.
  • Goose-neck Punch and Multi-Opening Die for up to 90° Forming
  • Space Between Ram Tool Clamps – Allows for deep box bending
  • Our standard ram clamps and optional quick release ram clamps will hold all punch tangs.
  • Our bed has a slot for the standard die tang shown in photos. Also, bed tooling without tang can be held with the included capture clamps.
  • Our standard ram clamp for all punch tangs shown in photos have two allen- head cap screws to secure tools.
  • Our optional ram clamps for all punch tangs are shown in photos. Lever action allows for quick tool change.
  • Special Note: The goose-neck punch and multi-opening die included are general purpose tools. Precision tooling should be purchased to meet your specific needs. There is no warranty on this tooling.
  • The Gooseneck punch tool sections included, are full length of ram. Multi-opening V-Die for up to 90 degree forming included, full length of bed. Die lifting rings included.

EQUIPPED WITH:

• CNC Controlled Mechanical Auto Crown

SPECIFICATIONS:

*Due to changes in economic conditions, US Industrial Machines are subject to a tariff surcharge.
Please contact our sales team to verify pricing.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

Machine Photo May Include Optional Equipment
Product image is only a representation, actual product appearance may differ slightly

OPTIONAL ITEMS:

• Upgrade to Fiessler Akas II Laser Guarding (Substitute for Sick deTec 4) … $5,995.00
• Add Third Axis (Back Gauge Height controlled from operator panel.) …. $4,995.00
• Upgrade to Cam-Lever Quick Action Ram Clamps …………………………….. $6,495.00
• Training in our Memphis, TN Facility ……………………………………………………. $750.00
• Training at customer site, more than 300 miles from Memphis: (If outside continental USA, please call for quote) ….. $4,995.00

The post U.S. INDUSTRIAL USHB275-13C 275 Ton x 13ft CNC Hydraulic Press Brake appeared first on Sheet Metal Machines.

• • ESA S929 CNC Control w/ 10″ High Resolution Screen with Offline Programming Capability
  • Servo X and Y Axes – Faster, More Accurate, Quieter
  • Linear Encoder – More Precise; Allows for top dead center and muting point to be programmed at
    CNC control
  • Linear Guide Rail on Back Gauge – Helps keep the back gauge aligned
  • Torsion Bar Design for Parallelism
  • Heavy Duty Forged Hydraulic Cylinders
  • Adjustable Dwell Timing
  • Light Curtains on Front and Photo-Electric Eyes on Rear of Machine for Safety
  • All 13′ Press Brakes Come with Auto-Crowning as a Standard Feature; Can be added to other models. See optional accessories.
  • Goose-neck Punch and Multi-Opening Die for up to 90° Forming
  • Space Between Ram Tool Clamps – Allows for deep box bending
  • Our standard ram clamps and optional quick release ram clamps will hold all punch tangs.
  • Our bed has a slot for the standard die tang shown in photos. Also, bed tooling without tang can be held with the included capture clamps.
  • Our standard ram clamp for all punch tangs shown in photos have two allen- head cap screws to secure tools.
  • Our optional ram clamps for all punch tangs are shown in photos. Lever action allows for quick tool change.
  • Special Note: The goose-neck punch and multi-opening die included are general purpose tools. Precision tooling should be purchased to meet your specific needs. There is no warranty on this tooling.
  • The Gooseneck punch tool sections included, are full length of ram. Multi-opening V-Die for up to 90 degree forming included, full length of bed. Die lifting rings included.

SPECIFICATIONS:

OPTIONAL ITEMS:

• Upgrade to Fiessler Akas II Laser Guarding (Substitute for Sick deTec 4) … $5,995.00
• Add Third Axis (Back Gauge Height controlled from operator panel.) …. $4,995.00
• CNC Controlled Mechanical Auto Crown …………………………………………….. $6,495.00
• Upgrade to Cam-Lever Quick Action Ram Clamps …………………………….. $6,495.00
• Training in our Memphis, TN Facility ……………………………………………………. $750.00
• Training at customer site, more than 300 miles from Memphis: (If outside continental USA, please call for quote) …. $4,995.00

The post U.S. INDUSTRIAL USHB275-10C 275 Ton x 10 ft CNC Hydraulic Press Brake appeared first on Sheet Metal Machines.

• • ESA S929 CNC Control w/ 10″ High Resolution Screen with Offline Programming Capability
  • Servo X and Y Axes – Faster, More Accurate, Quieter
  • Linear Encoder – More Precise; Allows for top dead center and muting point to be programmed at
    CNC control
  • Linear Guide Rail on Back Gauge – Helps keep the back gauge aligned
  • Torsion Bar Design for Parallelism
  • Heavy Duty Forged Hydraulic Cylinders
  • Adjustable Dwell Timing
  • Light Curtains on Front and Photo-Electric Eyes on Rear of Machine for Safety
  • All 13′ Press Brakes Come with Auto-Crowning as a Standard Feature; Can be added to other models. See optional accessories.
  • Goose-neck Punch and Multi-Opening Die for up to 90° Forming
  • Space Between Ram Tool Clamps – Allows for deep box bending
  • Our standard ram clamps and optional quick release ram clamps will hold all punch tangs.
  • Our bed has a slot for the standard die tang shown in photos. Also, bed tooling without tang can be held with the included capture clamps.
  • Our standard ram clamp for all punch tangs shown in photos have two allen- head cap screws to secure tools.
  • Our optional ram clamps for all punch tangs are shown in photos. Lever action allows for quick tool change.
  • Special Note: The goose-neck punch and multi-opening die included are general purpose tools. Precision tooling should be purchased to meet your specific needs. There is no warranty on this tooling.
  • The Gooseneck punch tool sections included, are full length of ram. Multi-opening V-Die for up to 90 degree forming included, full length of bed. Die lifting rings included.

SPECIFICATIONS:

*Due to changes in economic conditions, US Industrial Machines are subject to a tariff surcharge.
Please contact our sales team to verify pricing.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

Machine Photo May Include Optional Equipment
Product image is only a representation, actual product appearance may differ slightly

OPTIONAL ITEMS:

• Upgrade to Fiessler Akas II Laser Guarding (Substitute for Sick deTec 4) … $5,995.00
• Add Third Axis (Back Gauge Height controlled from operator panel.) …. $4,995.00
• CNC Controlled Mechanical Auto Crown …………………………………………….. $6,495.00
• Upgrade to Cam-Lever Quick Action Ram Clamps …………………………….. $3,295.00
• Training in our Memphis, TN Facility ……………………………………………………. $750.00
• Training at customer site, more than 300 miles from Memphis: (If outside continental USA, please call for quote) ……………. $4,995.00

The post U.S. INDUSTRIAL USHB200-8C 200 Ton x 8ft CNC Hydraulic Press Brake appeared first on Sheet Metal Machines.

• • ESA S929 CNC Control w/ 10″ High Resolution Screen with Offline Programming Capability
  • Servo X and Y Axes – Faster, More Accurate, Quieter
  • Linear Encoder – More Precise; Allows for top dead center and muting point to be programmed at
    CNC control
  • Linear Guide Rail on Back Gauge – Helps keep the back gauge aligned
  • Torsion Bar Design for Parallelism
  • Heavy Duty Forged Hydraulic Cylinders
  • Adjustable Dwell Timing
  • Light Curtains on Front and Photo-Electric Eyes on Rear of Machine for Safety
  • All 13′ Press Brakes Come with Auto-Crowning as a Standard Feature; Can be added to other models. See optional accessories.
  • Goose-neck Punch and Multi-Opening Die for up to 90° Forming
  • Space Between Ram Tool Clamps – Allows for deep box bending
  • Our standard ram clamps and optional quick release ram clamps will hold all punch tangs.
  • Our bed has a slot for the standard die tang shown in photos. Also, bed tooling without tang can be held with the included capture clamps.
  • Our standard ram clamp for all punch tangs shown in photos have two allen- head cap screws to secure tools.
  • Our optional ram clamps for all punch tangs are shown in photos. Lever action allows for quick tool change.
  • Special Note: The goose-neck punch and multi-opening die included are general purpose tools. Precision tooling should be purchased to meet your specific needs. There is no warranty on this tooling.
  • The Gooseneck punch tool sections included, are full length of ram. Multi-opening V-Die for up to 90 degree forming included, full length of bed. Die lifting rings included.

SPECIFICATIONS:

OPTIONAL ITEMS:

• Upgrade to Fiessler Akas II Laser Guarding (Substitute for Sick deTec 4) … $5,995.00
• Add Third Axis (Back Gauge Height controlled from operator panel.) …. $4,995.00
• CNC Controlled Mechanical Auto Crown …………………………………………….. $6,495.00
• Upgrade to Cam-Lever Quick Action Ram Clamps …………………………….. $3,295.00
• Training in our Memphis, TN Facility ……………………………………………………. $750.00
• Training at customer site, more than 300 miles from Memphis: (If outside continental USA, please call for quote) …. $4,995.00

The post U.S. INDUSTRIAL USHB155-8C 155 Ton x 8ft CNC Hydraulic Press Brake appeared first on Sheet Metal Machines.

• • ESA S929 CNC Control w/ 10″ High Resolution Screen with Offline Programming Capability
  • Servo X and Y Axes – Faster, More Accurate, Quieter
  • Linear Encoder – More Precise; Allows for top dead center and muting point to be programmed at
    CNC control
  • Linear Guide Rail on Back Gauge – Helps keep the back gauge aligned
  • Torsion Bar Design for Parallelism
  • Heavy Duty Forged Hydraulic Cylinders
  • Adjustable Dwell Timing
  • Light Curtains on Front and Photo-Electric Eyes on Rear of Machine for Safety
  • All 13′ Press Brakes Come with Auto-Crowning as a Standard Feature; Can be added to other models. See optional accessories.
  • Goose-neck Punch and Multi-Opening Die for up to 90° Forming
  • Space Between Ram Tool Clamps – Allows for deep box bending
  • Our standard ram clamps and optional quick release ram clamps will hold all punch tangs.
  • Our bed has a slot for the standard die tang shown in photos. Also, bed tooling without tang can be held with the included capture clamps.
  • Our standard ram clamp for all punch tangs shown in photos have two allen- head cap screws to secure tools.
  • Our optional ram clamps for all punch tangs are shown in photos. Lever action allows for quick tool change.
  • Special Note: The goose-neck punch and multi-opening die included are general purpose tools. Precision tooling should be purchased to meet your specific needs. There is no warranty on this tooling.
  • The Gooseneck punch tool sections included, are full length of ram. Multi-opening V-Die for up to 90 degree forming included, full length of bed. Die lifting rings included.

SPECIFICATIONS:

*Due to changes in economic conditions, US Industrial Machines are subject to a tariff surcharge.
Please contact our sales team to verify pricing.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

Machine Photo May Include Optional Equipment
Product image is only a representation, actual product appearance may differ slightly

The post U.S. INDUSTRIAL USHB125-8C 125 Ton x 8ft CNC Hydraulic Press Brake appeared first on Sheet Metal Machines.

STANDARD EQUIPMENT:

• Ram Deflection Adjustment
• Setting for ram speed slowdown and return position CNC controlled
• Forged Heavy-Duty Cylinder and Cylinder Body
• All Steel Construction
• Three Speed Ram
• Rapid Approach, Bending Cycle and Rapid Retreat
• Bottom Time Delay
• Inching, Single Cycle and Auto Run
• Ram takes standard American Tang Tooling (1/2” x 5/8”) and American Safety Tang Tooling, and Z1
• Space between Ram Tool Clamps allows for deep box bending
• CNC Precision Ground Punch and CNC Die

SPECIFICATIONS:
Working Pressure: 220 Tons
Length of Working Table: 157.4 in.
Distance Between Housings: 129.9 in.
Throat Depth: 15.74 in.
Ram Travel: 7.87 in.
Open Height: 20.86 in.
Rapid Ram Travel Speed: 6.29 in./sec.
Rapid Ram Retreat Speed: 4.72 in./sec.
Backgauge Travel: 24 in.
Pressing Speed: Dependent on Tool Load
Motor Horsepower: 20 HP, 220 or 440 Volts, 3 ph
Net Weight: 29,762 lbs.
Length: 199 in.
Width: 78 in.
Height: 111 in.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

OPTIONAL ITEMS:

• CNC 2-Axis Color Graphic Control: U.S. Industrial Model 2000 for Y1, Y2and Multi-Axis Press Brakes – Included
• Fiessler Akas II Laser Guarding – Included
• Add Third Axis (Back gauge height controlled from operator panel- R Axis) Above – $CALL; Included
• CNC Controlled Mechanical Auto Crown – Included
• Upgrade to Cam-Lever Quick Action Ram Clamps – Included
• High Speed Servo Back Gauge – Included
• Training in our Memphis, TN Facility – No Charge
• Training at customer site, less than 300 miles from Memphis – $CALL
• Training at customer site, more than 300 miles from Memphis: (If outside continental USA, please call for quote.) – $CALL

The post U.S. INDUSTRIAL USY220-13 220 ton x 13 ft Hydraulic Press Brake w/ Y1/Y2 Configuration appeared first on Sheet Metal Machines.

• DNC Servo Hydraulic Press Brake Forming System, Motorized WILA Crowning, CE Manual AKAS Safety, 8” Table, ESA 630 Control, 85ᵒ punch and die. Punch tip radius 0.8mm
• FOB Warehouse MD
• Frame is a robust, welded fabrication minimizing deflection and crowning issues
• Extremely rigid upper beam for minimum deflection
• Machine is flush floor mounted; no pit required
• Multiple hard-chromed cylinder system
• Built-in overload protection
• Deep gaps inside frames for bending longer lengths with larger flanges
• Quick approach and return speeds
• The parallelism between moving upper beam and fixed lower beam during descent and ascent is ensured by two servo-valves electrically controlled by DNC (axes Y1 and Y2)
• Two linear encoders located on each end of the upper beam make the measuring of the ram position. As the reference is always measured in relation to the bed, the ram position on bending depth is independent from the work length
• Slow approach in manual mode for tool alignment
• Upper moving beam guided at four points with adjustable gibbs made of self-lubricated material and with maintenance free bearings
• Easy adjustment of the bending depth under load over the plate being bent, with programming in 0.0004″ (0.01 mm) increments. The figure reached with the adjustment is easily entered into the computer tech
• Adjustable stroke of hydraulic cylinders for maximum machine and tool flexibility
• Choice of a narrow or wide bed bolted to the lower beam to allow flexibility with tooling
• Fast cycle time/quick approach and return speeds
• Hydraulic drive system, designed by Rexroth, complete with hydraulic fluid
• Three modes of operation – Manual, Semi-automatic and Automatic
• Ergonomically designed control panel for more convenient operator access
• Motor and controls. Electrics for 3/60/220/440. Low voltage at the controls.
• Emergency stop palm button on foot pedal assembly.
• Key-lock switch for ON/OFF for the power supply and for selector of modes of operation.
• Hydraulic fluid
• One instruction manual, one programming manual, one operation and service manual

STANDARD EQUIPMENT:

• ESA 630 Graphic CNC
• Y1, Y 2
• CNC Crowing
• Laser Guards
• Full length precision ground punch and 4 way V die Segmented and 4 way / Single V Die holder 29” Backgauge, highspeed servo

OPTIONAL ITEMS:

• On site training – add $5,950.00

Item/Model: PRIMELINE S200B12

The post PRIMELINE S200B12 Hydraulic CNC Press Brake appeared first on Sheet Metal Machines.

STANDARD EQUIPMENT:

• Estun E21, 2 Axis Controller
• ( 2 ) 24” front support arms
• Quick release segmented ( American Style Tooling ) punch holder
• Full Length Gooseneck Punch HRC 50 Full Length Vee Die with 6 assorted sizes HRC 50,1”,3/4”,5/8”, ½”, 3/8”, ¼”
• Lntech Light Curtain System
• Side and Back Safety Fence
• Movable Foot Pedal with E21 screen, control panel ,and E-stop meet OSHA safety standard

SPECIFICATIONS:
Maximum pressure: 33 Tons
Bending length capacity: 63″ (5’3″)
Distance between uprights (housing): 51″
Ram Stroke travel: 4″
Cylinder travel adjustment, max: 2″
Table width: 6″
Distance between table and ram: 13-1/4″
Throat Depth: 8″
Back Gauge Distance: 21″
Back Gauge Repeatability: .008″
Y Axis Repeatability: .008″
Approach speed, inch / second: 3.5″
Bending speed , inch / second: 0.39″
Return speed , inch / second: 2.75″

Main motor: 7-1/2 HP, 3 Phase 30 AMP, Prewired: 220VAC (+/- 10%)
Motor for back gauge: 1 HP, 3 Phase, 220VAC (+/- 10%)
Motor for bending angle setting: 1/2HP, 3 Phase, 220VAC, (+/- 10%)

Hydraulic oil tank capacity: 20 Gal.
Recommended Oil: Hydraulic oil Shell# 68HD
Machine weight: 5,350 lbs.
Machine size, L x W x H: 91 x 56 x 87 in.
Machine shipping dimensions: 91 x 56 x 87 in.

OPTIONAL ITEMS:

• On-site training, one day…………………………….. call for pricing

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post GMC HPB-3305CNC 33 Ton x 5 ft CNC Press Brake | Small Hydraulic Press Brake appeared first on Sheet Metal Machines.

STANDARD EQUIPMENT:

• ESA (Italy) Model 625, 2 Axis CNC Controller
• (2) 24″ front support arms, Quick Release for easy positioning
• Quick release segmented (American Style Tooling) punch holder
• Full Length Gooseneck Punch HRC 50 (Punch is rated for 10 gauge and lighter .062” radius punch) Additional Tooling may be required for thicker materials and purchaser’s specific products/parts – Ask your dealer for custom tooling quotes)
• Full Length Vee Die with 6 assorted sizes HRC 50
• Lntech Light Curtain System
• Side and Back Safety Fence
• Movable Foot Pedal with Estop meet OSHA safety standard

SPECIFICATIONS:
Maximum pressure: 70 Tons
Bending length capacity: 80″ (6′ 8″)
Distance between uprights (housing): 63″
Ram Stroke travel: 6″
Cylinder travel adjustment, max: 3-1/8″
Table width: 6″
Distance between table and ram: 15-1/4″
Max Stacked Tooling Height: 8-1/2″
Throat Depth: 10″
Back Gauge Distance: 24″
Back Gauge Repeatability: .0039″
Y Axis Repeatability: .0039″
Approach speed, inch / second: 3.14″
Working speed , inch / second: 0.35″
Return speed , inch / second: 2.36″
Main motor: 7-1/2 HP, 3-Phase, 30 AMP, Prewired: 220VAC (+/- 10%)
Servo motor for back gauge: 1 HP, 3 Phase, 220VAC (+/- 10%)
Servo motor for bending angle setting: 1/2HP, 3 Phase, 220VAC (+/- 10%)
Hydraulic oil tank capacity: 52 Gal.
Recommended Oil: Hydraulic Oil Shell #68HD
Machine weight: 8,650 lbs.
Machine size, L x W x H: 103 x 63 x 87 in.
Shipping Dimensions: 109 x 66 x 98 in.

OPTIONAL ITEMS:

• For ¼” tooling: Need single V die holder………call for pricing
• 4′ of punch and 2.5” single V Die , Flame hardened with safety tang….call for pricing
• On-site training, one day…………………………….. call for pricing

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post GMC HPB-7006CNC 70 Ton x 6 ft CNC Press Brake w/2-Axis ESA S625 CNC Controller appeared first on Sheet Metal Machines.