• Large 4-1/8″ spindle bore and 15 HP main motor high precision heavy-duty lathe designed to turn heavy parts smoothly and efficiently. The quality built construction ensures maximum durability, rigidity, and unsurpassed reliability.
• Hardened and precision ground chromium molybdenum steel gears in headstock
• Hardened and ground bed ways
• Meehanite casting bed
• Large 4-1/8″ spindle bore with D1-11 spindle nose
• Spindle speed range 15 ~ 1,200 rpm
• Carriage with mechanical overload device
• Turcite B coated slideways between saddle and bed
• Cross slide is induction hardened to HRC 52º and precision ground
• 2-speed tailstock quill speed
• Universal inch/metric gearbox
• Dual speed tailstock quill (ratio 1:1 and 1:5) provides easy drilling operation
• 2-way longitudinal (z-axis) power rapid traverse on S26100S, S26120S and S26160S

STANDARD ACCESSORIES:

• Removable gap
• Tailstock with duo speed quill
• Coolant system
• Chuck cover with limit switch
• D.P. / module thread change gears
• Threading dial indicator
• Center sleeve
• Dead center M.T. #5
• 2-way longitudinal z-axis power rapid traverse (S26100S, S26120S and S26160S only)
• Leveling screws and pads
• Manual and parts list

MACHINE INCLUDES:

• Steady rest with rollers
• 4-way tool post
• Face plate
• Halogen work light
• Chuck cover with limit switch
• Full length splash guard for S2660S and S2680S only
• On-carriage splash guard for S26100S, S26120S and S26160S only

Item/Model: VICTOR S2640S

The post VICTOR S2640S Precision Heavy Duty Lathe appeared first on Sheet Metal Machines.

• Precision built lathe combines accuracy, rigidity and 3-1/8″ hole thru spindle for most demanding applications. Thermal treated Meehanite cast bed and one-piece base provide superior durability and reliability.
• 3-1/8″ thru spindle hole
• One-piece high rigidity and low vibration base
• Thermal treated Meehanite cast bed
• Hardened and precision ground bedways
• Thermal treated and precision ground alloy gears
• Universal gearbox for both inch and metric threading
• Double reservoir oil bath type cross slide
• Safety overload device
• Wear-resistant phosphor bronze leadscrew nuts
• High capacity coolant tank provides sufficient coolant output
• 10 HP main motor delivers full power at all 12 speeds

STANDARD ACCESSORIES:

• Removable gap
• Tailstock
• Coolant system
• Chuck cover with limit switch
• Full length foot brake
• Threading dial indicator
• Auto-feed stopper ring
• Center sleeve
• Dead center M.T. #4
• Leveling screws and pads
• Manual and parts list

Item/Model: VICTOR 2090E

The post VICTOR 2090E Precision High Speed Lathe appeared first on Sheet Metal Machines.

• Large 4-1/8″ spindle bore and 15 HP main motor high precision heavy-duty lathe designed to turn heavy parts smoothly and efficiently. The quality built construction ensures maximum durability, rigidity, and unsurpassed reliability.
• Hardened and precision ground chromium molybdenum steel gears in headstock
• Hardened and ground bed ways
• Meehanite casting bed
• Large 4-1/8″ spindle bore with D1-11 spindle nose
• Spindle speed range 15 ~ 1,200 rpm
• Carriage with mechanical overload device
• Turcite B coated slideways between saddle and bed
• Cross slide is induction hardened to HRC 52° and precision ground
• 2-speed tailstock quill speed
• Universal inch/metric gearbox
• Dual speed tailstock quill (ratio 1:1 and 1:5) provides easy drilling operation
• 2-way longitudinal (z-axis) power rapid traverse on S22100S and S22120S

STANDARD ACCESSORIES:

• Removable gap
• Tailstock with duo speed quill
• Coolant system
• Chuck cover with limit switch
• D.P. / module thread change gears
• Threading dial indicator
• Center sleeve
• Dead center M.T. #5
• 2-way longitudinal z-axis power rapid traverse (S22100S and S22120S only)
• Leveling screws and pads
• Manual and parts list

MACHINE INCLUDES:

• Steady rest with rollers
• 4-way tool post
• Face plate
• Halogen work light
• Chuck cover with limit switch
• Full length splash guard for S2240S, S2260S and S2280S only
• On-carriage splash guard for S22100S and S22120S only

Item/Model: VICTOR S22160S

The post VICTOR S22160S Precision Heavy Duty Lathe appeared first on Sheet Metal Machines.

• Headstock gears are made of chrome-moly steel
• Hardened and precision ground spindle and headstock gears
• A forced lubrication system lubricates all headstock gears and bearings
• Bed is made of high tensile cast iron FC30
• Hardened and ground bed ways
• Leadscrew is equipped with a torque limit safety device
• Feed rod has a built-in overload safety clutch
• An interlocking device in the apron to prevent simultaneous engagement of auto feeding and threading operations
• Jog button for easy spindle speed changes
• Full length foot brake
• Powerful 5 HP main motor

STANDARD ACCESSORIES:

• Halogen work light
• Tool box
• Coolant system
• Dead Centers M.T. #3
• 4-way tool post
• Chuck cover with micro switch
• Reducing sleeve
• Instruction manual and parts list
• Full length splash guard
• Threading dial indicator
• Gap bed
• Leveling screws and pads

Item/Model: VICTOR 1440GL

The post VICTOR 1440GL High Speed Precision Lathe appeared first on Sheet Metal Machines.

• Precision built lathe combines accuracy, rigidity and 3-1/8″ hole thru spindle for most demanding applications. Thermal treated Meehanite cast bed and one-piece base provide superior durability and reliability.
• 3-1/8″ thru spindle hole
• One-piece high rigidity and low vibration base
• Thermal treated Meehanite cast bed
• Hardened and precision ground bedways
• Thermal treated and precision ground alloy gears
• Universal gearbox for both inch and metric threading
• Double reservoir oil bath type cross slide
• Safety overload device
• Wear-resistant phosphor bronze leadscrew nuts
• High capacity coolant tank provides sufficient coolant output
• 10 HP main motor delivers full power at all 12 speeds

STANDARD ACCESSORIES:

• Removable gap
• Tailstock
• Coolant system
• Chuck cover with limit switch
• Full length foot brake
• Threading dial indicator
• Auto-feed stopper ring
• Center sleeve
• Dead center M.T. #4
• Leveling screws and pads
• Manual and parts list

Item/Model: VICTOR 2060E

The post VICTOR 2060E Precision High Speed Lathe appeared first on Sheet Metal Machines.

• Headstock gears are made of chrome-moly steel
• Hardened and precision ground spindle and headstock gears
• A forced lubrication system lubricates all headstock gears and bearings
• Bed is made of high tensile cast iron FC30
• Hardened and ground bed ways
• Leadscrew is equipped with a torque limit safety device
• Feed rod has a built-in overload safety clutch
• An interlocking device in apron to prevent simultaneous engagement of auto feeding and threading operations
• Full length foot brake
• Powerful 5 HP main motor
• 2-step infinitely variable speed – low gear: 36~300 rpm, high gear: 300~2,200 rpm
• Digital spindle speed display
• Easy spindle speed change while running by a knob control
• Equipped with high performance and low-noise variable-frequency drive (VFD).

STANDARD ACCESSORIES:

• Halogen work light
• Tool box
• Coolant system
• Dead Centers M.T. #3
• 4-way tool post
• Chuck cover with micro switch
• Reducing sleeve
• Instruction manual and parts list
• Full length splash guard
• Threading dial indicator
• Gap bed
• Leveling screws and pads

Item/Model: VICTOR 1440GLV

The post VICTOR 1440GLV Digital Variable High Speed Precision Lathe appeared first on Sheet Metal Machines.

• Power elevating motor arm with an anti-fall safety device
• Hardened and precision ground arm ways
• High speed gears are made of Nickel-Chrome steel and through the heat treatment process and precision grinding
• Extra auxiliary dial for spindle feed depth indication to review the momental feed depth of spindle
• Special mechanism for spindle balance to avoid the defect on breaking of balance spring
• Manual clamping of column, arm, and head
• Built-in work light
• Built-in coolant system

STANDARD ACCESSORIES:

• Plain box table
• Work light
• Coolant system

Item/Model: VICTOR 837

The post VICTOR 837 Radial Drill appeared first on Sheet Metal Machines.

• Power elevating motor arm with an anti-fall safety device
• Hardened and precision ground arm ways
• High speed gears are made of Nickel-Chrome steel and through the heat treatment process and precision grinding
• Extra auxiliary dial for spindle feed depth indication to review the momental feed depth of spindle
• Special mechanism for spindle balance to avoid the defect on breaking of balance spring
• Manual clamping of column, arm, and head
• Built-in work light
• Built-in coolant system

STANDARD ACCESSORIES:

• Plain box table
• Work light
• Coolant system

Item/Model: VICTOR 829

The post VICTOR 829 Radial Drill appeared first on Sheet Metal Machines.

• Victor 3600RF series lathe is designed to provide outstanding performance and structural rigidity with large 6.02″ spindle bore suitable for turning and cutting a large workpiece.
• 6.02″ spindle bore is designed for large chucking capability
• Hardened and precision ground alloy steel gears and shafts
• The precision ground spindle is supported at three points by high precision bearings
• One piece structure bed to enhance the machine life and working performance
• High tensile ribbed wide bed with hardened and precision ground bed ways for rigidity and low vibration
• Universal gearbox for inch, metric, D.P., and module threading without changing gears
• Central lubrication system can be operated automatically or manually for slide ways
• Adjustable safety overload device
• Rotating type speed changing system for easy operation
• Tailstock is equipped with a two-speed quill that is suitable for heavy duty and easy drilling work
• 4-way power rapid traverse
• Automatic stopper for longitudinal feeds

STANDARD ACCESSORIES:

• Center sleeve
• Dead center M.T. #6
• Auto lubrication system
• Coolant system
• Tailstock with a two-speed quill
• Removable gap
• 4-way power rapid traverse
• Leveling screws and pads
• Manual and parts list
• Tool box with tools

MACHINE INCLUDES:

• Steady rest with rollers
• 4-way power rapid traverse
• Double chuck system
• Auto lube system
• 4-way tool post
• Halogen work light
• Chuck cover with limit switch

Item/Model: VICTOR 3600RF SERIES: ENTER MODEL#

The post VICTOR 3600RF Series Big Bore Heavy-Duty Lathes appeared first on Sheet Metal Machines.

• Victor 4000RF series lathe is designed to provide outstanding performance and structural rigidity with large 6.02″ spindle bore suitable for turning and cutting a large workpiece.
• 6.02″ spindle bore is designed for large chucking capability
• Hardened and precision ground alloy steel gears and shafts
• The precision ground spindle is supported at three points by high precision bearings
• One piece structure bed to enhance the machine life and working performance
• High tensile ribbed wide bed with hardened and precision ground bed ways for rigidity and low vibration
• Universal gearbox for inch, metric, D.P., and module threading without changing gears
• Central lubrication system can be operated automatically or manually for slide ways
• Adjustable safety overload device
• Rotating type speed changing system for easy operation
• Tailstock is equipped with a two-speed quill that is suitable for heavy duty and easy drilling work
• 4-way power rapid traverse
• Automatic stopper for longitudinal feeds

STANDARD ACCESSORIES:

• Center sleeve
• Dead center M.T. #6
• Auto lubrication system
• Coolant system
• Tailstock with a two-speed quill
• Removable gap
• 4-way power rapid traverse
• Leveling screws and pads
• Manual and parts list
• Tool box with tools

MACHINE INCLUDES:

• Steady rest with rollers
• 4-way power rapid traverse
• Double chuck system
• Auto lube system
• 4-way tool post
• Halogen work light
• Chuck cover with limit switch

Item/Model: VICTOR 4000RF SERIES: ENTER MODEL#

The post VICTOR 4000RF Series Big Bore Heavy-Duty Lathes appeared first on Sheet Metal Machines.