Tin Knocker - Sheet Metal Machines

TIN KNOCKER TK1018 10 ft x 18 ga. Manual Leaf Brake

lt2@sierravictor.com — Fri, 14 Jun 2024 15:25:41 +0000

Tin Knocker offer a 10’ sheet metal brakes of 18-gauge capacity. This is an industrial quality brake, the kind you use over a lifetime. Another Tin Knocker example, showing that top quality doesn’t have to cost more. Check out these specifications and features. They compare to any quality brake manufacturers.
Includes these outstanding features:
1. Spring steel nose bar for long lasting durable service
2. Bronze bushed pivot points with lube zirks
3. Heavy plate fabricated frame
4. Full length stiffening bar to bend to capacity

SPECIFICATIONS:
Capacity: 18 ga.
Bend Length: 10 ft 1 in.
Beam Lift: 2-1/4 in.
Box or Pan Depth: 2 in. 3 sides
Bolt On Apron Angle: Included
Counter Weight: Included
Dimensions: Approx. 144 L x 32 W x 43 H in.
Weight: Approx. 2,750 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Limited

The post TIN KNOCKER TK1018 10 ft x 18 ga. Manual Leaf Brake appeared first on Sheet Metal Machines.

TIN KNOCKER TK36 20 ga. x 36 in. Button Punch Cheek Bender

lt2@sierravictor.com — Thu, 13 Jun 2024 23:17:18 +0000

The Tin Knocker No 36 Button Punch Cheek Bender is perfect for fabricating fittings. The dual sided tooling provides 3 functions. One side makes a right-angle flange with button punch while the other side makes 2 different size right angle flanges.
Hardened Tooling for long life.
Performs Right Angle Flange with Button Punch.
Performs male small Pittsburgh Right Angle Flange
Performs male large Pittsburgh Right Angle Flange
Easy setups for all three flange functions
Self-contained hydraulic system

SPECIFICATIONS:
Maximum thickness of material processed: 20 gauge or lighter
Electrical: Single Phase, 110 Volt, 15amp
Dimensions: Approx 46 x 44 x 31 in.
Shipping weight: 350 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Limited

The post TIN KNOCKER TK36 20 ga. x 36 in. Button Punch Cheek Bender appeared first on Sheet Metal Machines.

TIN KNOCKER TK 2 in 1 Crimper Beader

lt2@sierravictor.com — Mon, 12 Feb 2024 18:50:24 +0000

The Tin Knocker 2n1 Crimper Beader is a machine that is light weight and can perform both beading and crimping. This manual hand cranked machine is portable and works great in the field for the insulation trade where light gauge materials are used.
Performs both beading and crimping operations with one setup.
No tools are needed for setups.
Both bead and crimp have markable surfaces to assist the operator in repeating setups.
Either 1/8 inch or 1/4-inch bead sizes are available.
The unit allows the head to be positioned as desired to the preference of the operator.
Easily portable for job site use.

SPECIFICATIONS:
Maximum thickness of material processed: 0.030 in.
Maximum crimp width: 1-1/2 in.
Bead diameter outside, large bead: 1/4 in.
Bead diameter outside, small bead: 1/8 in.
Maximum distance from bead center to edge: 1-1/2 in.
Thickness range of bench top for mounting: 3/4 to 3-1/2 in.
Dimensions Approx.: 26 x 16 x 12 in.
Shipping weight: 28 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post TIN KNOCKER TK 2 in 1 Crimper Beader appeared first on Sheet Metal Machines.

TIN KNOCKER TK S & Drive 22 ga. Rollformer

lt2@sierravictor.com — Mon, 12 Feb 2024 16:21:19 +0000

The perfect machine to make metal into “S” and Drive Cleats.
A fast payback item.
Uses approx. 3-5/8″ of material for S-Cleats, 2-1/8″ for Drive Cleats.

SPECIFICATIONS:

Capacity:	Galvanized Mild Steel	22-28 Ga
	Width of S-Cleat	1-1/16 in.
	Width of Drive Cleat	1-1/8 in.
Motor:		1.5 HP, single phase, 110v
Speed:		90 FPM
Dimensions:		Approx. 52 x 29 x 46 in.
Shipping Weight:		Approx. 565 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post TIN KNOCKER TK S & Drive 22 ga. Rollformer appeared first on Sheet Metal Machines.

TIN KNOCKER TK24 24 ga. Pittsburgh Roll Former w/Stand and Flanger Attachment

lt2@sierravictor.com — Thu, 28 Sep 2023 16:11:33 +0000

On the job site or in the shop, this portable little rollformer is a work horse for 24 gauge and lighter material. It is available with power flanging attachment and is perfect for field use. Steel stand included.
Portable rollformer is a work horse for 24 gauge and lighter material.
It is available with power flanging attachment and is perfect for field use.
With the included, all steel stand, it will also fit right in with your other shop equipment.
NOTE: When shipping, rollformer will fit inside stand

SPECIFICATIONS:
Capacity: 24 Gauge Mild Steel
Motor: 1/2 HP, 1700 RPM, 115 Volt, Single Phase, 60 Hz – Standard (optional – 230v/1/50 available – please call)
Depth of Pocket: Approx. 5/16″ (7.9mm) with hammer edge of 3/8″ (9.53mm)
Speed: Approx. 35 FPM
Flange Height: 3/16″ (4.76mm)
Dimensions of Roll Former: 30″ x 14″ x 20″ (762mm x 356mm x 508mm)
Dimensions of Stand: 35″ x 14″ x 24″ (889mm x 483mm x 610mm) add 6″ around for shipping
Shipping Dimensions: 41″ x 25″ x 30″ (1,041mm x 65mm x 762mm)
Weight: Rollformer: 305 lbs

OPTIONAL MODEL:
TIN KNOCKER TK24 24 ga. Pittsburgh Roll Former w/Stand = $2,950.00

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post TIN KNOCKER TK24 24 ga. Pittsburgh Roll Former w/Stand and Flanger Attachment appeared first on Sheet Metal Machines.

TIN KNOCKER Circle Shear

smm-admin — Tue, 23 May 2023 19:46:36 +0000

TIN KNOCKER 16 ga. Circle Shear

Hand crank feed operation for easy cutting
Equipped with back gauge for aid in positioning work

STANDARD EQUIPMENT:

Floor Legs
Rack & Pinion Feed for Tail Stock
Flanging Rolls

ITEM: 42″ x 16 ga Circle Shear

MANUFACTURER: TIN KNOCKER

MODEL: TK CIRCLE SHEAR

Item/Model: TIN KNOCKER TK CIRCLE SHEAR

The post TIN KNOCKER Circle Shear appeared first on Sheet Metal Machines.

TIN KNOCKER 16 ga. Gang Slitter

smm-admin — Tue, 23 May 2023 19:46:36 +0000

Cut multiple blanks of light gauge sheet metal… in one pass!
Great for roofing and architectural!
Gang slit blanks from 16 to 30 gauge.
Slit blanks at speeds up to 60 FPM
Gang slit pre-painted and other sheet material
Life lubed bearings
3” cold rolled polish shafts
2 sets of reversible knives
Heavy duty chain drive
Stripper fingers to prevent twist
Operating Speed: 60 FPM
3/4 HP, 110/220V, 1 Phase Motor
Tool steel blades with stripper rings
(Non-scratch: pre-painted, copper, polished metals, etc.)

SPECIFICATIONS:
Overall width: 58
Width between end frames: 52-1/4″
Max Cutting Width: 48-1/2″
Table Height: 35″
Feed Speed: 60 FPM
Overall depth: 26″
Shaft Diameter: 3″
Knife Dimensions: 5” OD x 1/4”
Motor HP: 3/4 HP
Electrics: 110/220V – 1ph
Ship Dimensions: 67” x 37” x 48”
Weight: 525 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post TIN KNOCKER 16 ga. Gang Slitter appeared first on Sheet Metal Machines.

TIN KNOCKER Hydraulic Corner Notcher

smm-admin — Tue, 23 May 2023 19:46:35 +0000

Hardened steel blades (reversible uppers)
Split head: allows for and adjustable tab – 0-1”
Gage Plate (table)
2 – Gauges (45 degree mitre on one end)
Angle Iron Stand
Hydraulic System

The post TIN KNOCKER Hydraulic Corner Notcher appeared first on Sheet Metal Machines.

TIN KNOCKER 20 ga. Hem & Kick Roll Former

smm-admin — Tue, 23 May 2023 19:46:35 +0000

This machine is standard equipped with no tooling in the center position and (2) sets of outboard shafts equipped with;
1/2” x 180-degree hem rolls for 20-26ga (right side)
1/2 Hem with 5/8” Kick Rolls (left side)

SPECIFICATIONS:
Speed: 90 feet per minute
Motor: 5 HP 230/460V/3/60/1800 RPM (Please Specify)
Drive: Matched Double Vee Belt
Base: Arc Welded Steel. Heavy top plate
Feed table height: 34-5/8”
Shipping Weight: Approximately 1,050 lbs.
Dimensions: 68” long, 24” wide, 48” high

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post TIN KNOCKER 20 ga. Hem & Kick Roll Former appeared first on Sheet Metal Machines.

TIN KNOCKER Angle Iron Worker

smm-admin — Tue, 23 May 2023 19:46:34 +0000

SHEAR, NOTCH & BEND ANGLE IRON WITH EASE.
Here is VERSATILITY AND MULTI-FUNCTIONALITY!
Great for making sign frames, trailer frames, machine stands, or anything using angle iron.
Stand and Extension Bar, Included

The post TIN KNOCKER Angle Iron Worker appeared first on Sheet Metal Machines.