Jag - Sheet Metal Machines

JAG Corner Fixer

smm-admin — Tue, 23 May 2023 19:45:51 +0000

Fast, easy corner insertion and crimping in ducts and fittings.
Although the CORNER FIXER is portable and light in weight, it’s heavy on performance, automatically inserting and crimping TDC and TDF corners in seconds. In addition to handling virtually every style of duct, the CORNER FIXER also works with multiple types of straight fittings. Automatic duct squaring for ducts and fittings from 18 – 26 gauge (0.5 – 1.3 mm) galvanized mild steel.

SPECIFICATIONS:
Capacity: 18 – 26 gauge (0.5 – 1.3 mm)
Power: 230 volts, 60 cycle, single phase, AC
Air Pressure: 90 psi
Dimensions: 42”L x 51W” x 54”H (1060 x 1280 x 1360 mm)
Weight: 238 lbs. (108 kg)

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post JAG Corner Fixer appeared first on Sheet Metal Machines.

JAG TDC 18 Ga. RollFormer

smm-admin — Tue, 23 May 2023 19:45:50 +0000

Roll your own flanges and pocket the savings.
The TDC Rollformer has 12 forming stations and produces TDC flanges at speeds of up to 60 feet per minute (18.3m/min)!
JAG quality construction with an industrial motor and gearbox; high precision bearings; heavy-duty three zone chassis; plate head construction; hardened and ground roll shafts all protected with JAG’s top-quality primer and paint finish.
Optional rolls are available for TDC clip production (22 gauge).

SPECIFICATIONS:

Capacity: 18 – 24 gauge (0.70 – 1.31 mm)
Depth of Pocket: 1-7/8” (47.6 mm) / 2-1/8” (54.0 mm) for Clip
Speed: 50 fpm (15.2 m/min)
Motor: 10 HP (7 kw) – 230 volts, 60 cycle, 3 phase, AC, 1800 RPM
Dimensions: 117”L x 33W” x 46”H (2950 x 830 x 1150 mm)
Weight: 2,090 lbs. (950 kg)

OPTIONAL ITEMS:
Optional TDC Clip Roll Set: $CALL

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post JAG TDC 18 Ga. RollFormer appeared first on Sheet Metal Machines.

JAG TDF 16 Ga. RollFormer

smm-admin — Tue, 23 May 2023 19:45:50 +0000

Save time and money forming TDF flanges the easy way.
The 16-Station TDF Rollformer unitizes steel construction, high yield and tensile strength shafts, and “off the shelf” ball bearings.
Other key features and benefits include:
Heavy-duty Mod4 (6 pitch) gears.
Extended roll shafts for mounting auxiliary rolls (one side outboard only).
Optional tooling sets available for outboard mounting.
All steel forming head, hardened steel infeed guide, and hardened steel forming rolls mounted on turned and ground spindles.
No adjustments necessary when going from 26 gauge to 18 gauge material.
Includes Snap Flange Feature.
Comes standard with short parts feeder for 6 inch (152 mm) minimum lengths (requires no manual adjustment or removal of machine guards when running short parts).
Optional rolls available for TDF clip production (20 gauge).

SPECIFICATIONS:
Capacity: 16 – 26 gauge (0.55 – 1.31 mm)
Depth of Pocket: 1-11/16” (42.9 mm)
Speed: 50 fpm (15.2 m/min)
Motor: 7-1/2 HP (5.5 kw) – 230 volts,
60 cycle, 3 phase, AC, 1800 RPM
Dimensions: 141”L x 33W” x 46”H (3570 x 830 x 1150 mm)
Weight: 2,420 lbs. (1,100 kg)

OPTIONAL ITEMS:
Optional TDF Clip Roll Set: $CALL

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post JAG TDF 16 Ga. RollFormer appeared first on Sheet Metal Machines.

JAG 16 ga. Seam Closer

smm-admin — Tue, 23 May 2023 19:45:50 +0000

The quiet, automated way to close seams in less than six seconds!
Key features and benefits:
Eliminate hammering to close ductwork seams.
Greatly reduce noise levels and speed up duct seam closing in your shop or at the job site.
Seam Closer will also close both insulated and reinforced ductwork.
Seams from top and bottom to the middle to avoid run out and incomplete seaming.

SPECIFICATIONS:
Capacity: 16 – 24 gauge (0.70 – 1.61 mm)
Duct Length: 1-3/4 – 6-1/2 feet (530 – 1980 mm) of material
Duct Connections: Slip & drive, raw, TDC/F and slip-on flanges
Duct Material: Galvanized mild steel, stainless steel and aluminum
Hydraulics: Self-contained 25 gallons (95 liters)
Motor: 2 HP (1.5 kw) – 220 volts, 60 cycle, three phase, AC
Dimensions: 35”L x 35W” x 111”H (890 x 890 x 2820 mm)
Weight: Machine – 2,230 lbs. (1014 kg), Hydraulic Reservoir – 330 lbs. (150 kg)

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post JAG 16 ga. Seam Closer appeared first on Sheet Metal Machines.

JAG 5 ft x 14 ga. Air Folder

smm-admin — Tue, 23 May 2023 19:45:49 +0000

A free standing general fabrication wrap brake.
The AIR FOLDER is ideal for forming and bending panels and other flanged metal parts.
Pneumatic operated, foot pedal control.
Rugged welded steel construction.
Maintenance-free bearing and guides.
Pneumatic drive folding beam.
Safety interlock controls.
Dial-adjustable bend angle 0-90°.
Automatic TDC/F notch locator.
Pneumatic drive clamping beam with automatic return

SPECIFICATIONS:

Capacity: 14 – 16 gauge (1.6 – 2.0 mm)
Depth of Pocket: 1/2” (12.7 mm) – uses 1-3/8” (34.9 mm) of material
Maximum Bend Length: 60″ (1525 mm)
Maximum Galvanized Steel Thickness: 1/16” (1.6 mm)
Minimum Wrap Duct Size: 8.7” x 8.7” (220 x 220 mm)
Clean, Dry Air Supply: 11 CFM at 100 PSI (not to exceed 120 PSI)
Dimensions: 88”L x 46W” x 35”H (2235 x 1170 x 890 mm)
Weight: 2,046 lbs. (930 kg)

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post JAG 5 ft x 14 ga. Air Folder appeared first on Sheet Metal Machines.