HM Machinery - Sheet Metal Machines https://sheetmetalmachines.com/brand/hm-machinery/ New Metalworking Machinery and Equipment Sales Mon, 09 Dec 2024 15:16:27 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://sheetmetalmachines.com/wp-content/uploads/2023/10/cropped-Smm_logo_2023_3-fav-32x32.png HM Machinery - Sheet Metal Machines https://sheetmetalmachines.com/brand/hm-machinery/ 32 32 HM MACHINERY HM-1300 Series Bench Mounting Brackets https://sheetmetalmachines.com/product/hm-machinery-hm-1300-brackets/ Mon, 02 Dec 2024 18:19:00 +0000 https://sheetmetalmachines.com/?post_type=product&p=10981 Quality European Machinery
Discounted FREIGHT on the NEW HM Machines – Please call for discounted freight rate.
Designed as an attachment for the 1300 Series brakes, the bench mounting brackets add flexibility to installation of your brake.
These brackets add versatility in addition to the stock floor mounting legs.
Can be mounted at a dedicated benchtop space in a shop or in a work vehicle for in-field fabrication.

The post HM MACHINERY HM-1300 Series Bench Mounting Brackets appeared first on Sheet Metal Machines.

]]>
  • Designed as an attachment for the 1300 Series brakes, the bench mounting brackets add flexibility to installation of your brake. Whether it’s mounted at a dedicated benchtop space in a shop, or mounted in a work vehicle for in-field fabrication, these brackets add versatility in addition to the stock floor mounting legs.

    • For more information call us at (386) 304-3720

    Specifications are subject to change without notice.
    NOTE: Data is provided by the manufacturer.
    WARRANTY: 1 YEAR – Limited

    The post HM MACHINERY HM-1300 Series Bench Mounting Brackets appeared first on Sheet Metal Machines.

    ]]>         HM MACHINERY HM-1300 Series Low Beam Straight Nose Bar https://sheetmetalmachines.com/product/hm-machinery-hm-1300-series-low-beam-straight-nose-bar/ Mon, 02 Dec 2024 18:14:57 +0000 https://sheetmetalmachines.com/?post_type=product&p=10978 Quality European Machinery
    Discounted FREIGHT on the NEW HM Machines – Please call for discounted freight rate.
    Designed to be interchangeable and work with all 1300 Series brakes.
    The Low Beam Straight Nose Bar allows conversion of segmented box and pan brakes to straight brakes.

    The post HM MACHINERY HM-1300 Series Low Beam Straight Nose Bar appeared first on Sheet Metal Machines.

    ]]>
  • Designed to be interchangeable and work with all 1300 Series brakes, the Low Beam Straight Nose Bar allows conversion of segmented box and pan brakes to straight brakes.

    • For more information call us at (386) 304-3720

    Specifications are subject to change without notice.
    NOTE: Data is provided by the manufacturer.
    WARRANTY: 1 YEAR – Limited

    The post HM MACHINERY HM-1300 Series Low Beam Straight Nose Bar appeared first on Sheet Metal Machines.

    ]]>         HM MACHINERY HM-1300 Series Manual Backgauge Attachment https://sheetmetalmachines.com/product/hm-machinery-hm-1300-mbg/ Mon, 02 Dec 2024 18:09:16 +0000 https://sheetmetalmachines.com/?post_type=product&p=10974 Quality European Machinery
    Discounted FREIGHT on the NEW HM Machines – Please call for discounted freight rate.
    Designed as an attachment for the HM-1300 Series brakes.
    The manual backgauge allows the user to quickly and easily adjust the depth of insertion for sheets of metal.
    Gives consistent and accurate bends.

    The post HM MACHINERY HM-1300 Series Manual Backgauge Attachment appeared first on Sheet Metal Machines.

    ]]>
  • Designed as an attachment for the 1300 Series brakes, the manual backgauge allows the user to quickly and easily adjust the depth of insertion for sheets of metal, ensuring consistent and accurate bends.
  • Manually adjust the depth of your material for consistent, accurate bends

    • For more information call us at (386) 304-3720

    Specifications are subject to change without notice.
    NOTE: Data is provided by the manufacturer.
    WARRANTY: 1 YEAR – Limited

    The post HM MACHINERY HM-1300 Series Manual Backgauge Attachment appeared first on Sheet Metal Machines.

    ]]>         HM MACHINERY 4 ft x 20 ga. Combo Brake | HM 1300 2n1 https://sheetmetalmachines.com/product/hm-machinery-hm-1300-2n1/ Mon, 02 Dec 2024 17:20:06 +0000 https://sheetmetalmachines.com/?post_type=product&p=10960 Quality European Machinery
    Discounted FREIGHT on the NEW HM Machines – Please call for discounted freight rate.
    The HM Machinery 1300 2n1 Combo Brake is the perfect way to get maximum versatility in a manual brake. This combo package includes 2 different interchangeable tooling sections that can be easily swapped:
    - Low Beam Straight Nose Bar for straight bends up to 135 degrees
    - Segmented Tall Nose Bar for box and pan and other complex bends

    The post HM MACHINERY 4 ft x 20 ga. Combo Brake | HM 1300 2n1 appeared first on Sheet Metal Machines.

    ]]>     The HM Machinery 1300 2n1 Combo Brake is the perfect way to get maximum versatility in a manual brake. This combo package includes 2 different interchangeable tooling sections that can be easily swapped:

      • Low Beam Straight Nose Bar for straight bends up to 135 degrees
      • Segmented Tall Nose Bar for box and pan and other complex bends

    SPECIFICATIONS:
    Maximum Bend Length: 53 in.
    Maximum Material Capacity: 20-Gauge Mild Steel
    Maximum Opening (straight tooling): 1.5 in.
    Maximum Box/Pan Height (segmented tooling): 2.75 in.
    Maximum Folding Angle: 135 Degrees (straight tooling),
    95 Degrees (segmented tooling) Approx. Shipping Dimensions: 60 x 20 x 42 in.
    Approx. Shipping Weight: 275 lbs.

    Specifications are subject to change without notice.
    NOTE: Data is provided by the manufacturer.
    WARRANTY: 1 YEAR – Limited

    OPTIONAL ITEMS – CALL FOR PRICE:
    To further increase its versatility, contact us when purchasing to add these optional accessories:

    • Manual Backgauge
    • Rear Support Table
    • Roller Shear

    VIDEO:
    Sheet Metal Machines YouTube Channel: Watch It Now

    The post HM MACHINERY 4 ft x 20 ga. Combo Brake | HM 1300 2n1 appeared first on Sheet Metal Machines.

    ]]>         HM MACHINERY 4 ft x 12 ga. Universal Manual Brake | HM HS-3S-3SH https://sheetmetalmachines.com/product/hm-machinery-hm-hs3s3sh/ Mon, 02 Dec 2024 17:09:12 +0000 https://sheetmetalmachines.com/?post_type=product&p=10953 Quality European Machinery
    Discounted FREIGHT on the NEW HM Machines – Please call for discounted freight rate.
    The HS-3S-3SH Universal Manual Brake is a 50 inch, 12 gauge universal brake with segmented top and bottom bending surfaces.
    The HS-3S-3SH brake allows bending in inverse directions, enabling special profiles, such as boxes and pans, to be formed.
    Equipped with 13 segments of angled tooling on both top and bottom bending surfaces.

    The post HM MACHINERY 4 ft x 12 ga. Universal Manual Brake | HM HS-3S-3SH appeared first on Sheet Metal Machines.

    ]]>
  • The HS-3S-3SH Universal Manual Brake is a 50 inch, 12 gauge universal brake with segmented top and bottom bending surfaces. The HS-3S-3SH brake allows bending in inverse directions, enabling special profiles, such as boxes and pans, to be formed.
  • HM Machinery Superflex machines are heavy duty, with fully welded construction. Foot-operated control of the clamp bar ensures extremely fast and simple operation and allows both hands to be kept free for adjustment of the material being folded.
  • Precision ground tooling creates straight, clean bends every time.
  • Equipped with 13 segments of tooling on both top and bottom bending surfaces.
  • Precise material positioning is made possible with a foot-operated clamping mechanism, allowing the operator to use both hands to handle and position material
  • Repeat angle stop enables easily repeatable bends.
  • The lift handle is ergonomically designed and operable from either side of the machine, allowing flexibility while fabricating complex shapes and profiles.

    • SPECIFICATIONS:
    Maximum Bend Length: 50 in.
    Maximum Material Capacity: 12 Gauge Mild Steel
    Maximum Opening: 1.78 in.
    Maximum Folding Angle: 100-150 Degrees (depending on profile)
    Approx. Shipping Dimensions: 63 W x 36 D x 50 H in.
    Approx. Shipping Weight: 915 lbs.

    Specifications are subject to change without notice.
    NOTE: Data is provided by the manufacturer.
    WARRANTY: 1 YEAR – Limited

    VIDEO:
    Sheet Metal Machines YouTube Channel: Watch It Now

    The post HM MACHINERY 4 ft x 12 ga. Universal Manual Brake | HM HS-3S-3SH appeared first on Sheet Metal Machines.

    ]]>         HM MACHINERY 60 in. x 3 ga. Power Roll | HM MRM 1550-130 https://sheetmetalmachines.com/product/hm-machinery-hm-mrm1550130/ Mon, 02 Dec 2024 16:38:45 +0000 https://sheetmetalmachines.com/?post_type=product&p=10946 Quality European Machinery
    Discounted FREIGHT on the NEW HM Machines – Please call for discounted freight rate.
    The HM Machinery MRM 1550-130 Power Roll is a heavy duty motorized bending roll, with 3 rolls mounted on solid steel gable-ends, for heavy gauge, large scale fabrication.
    The MRM Power Roll can accommodate sheets up to 60 inch wide and 120 inch in length, with a material capacity of 3 gauge mild steel.
    Roll position is easily adjusted via a powered gear system.

    The post HM MACHINERY 60 in. x 3 ga. Power Roll | HM MRM 1550-130 appeared first on Sheet Metal Machines.

    ]]>
  • The HM Machinery MRM 1550-130 Power Roll is a heavy duty motorized bending roll, with 3 rolls mounted on solid steel gable-ends, for heavy gauge, large scale fabrication.
  • The MRM Power Roll can accommodate sheets up to 60″ wide and 120″ in length, with a material capacity of 3 gauge mild steel. Roll position is easily adjusted via a powered gear system.
  • With both upper and lower rolls driven, plus a high polished finish, preventing damage to pre-finished components or marking of materials is easily avoided.
  • Upper and lower rolls are driven directly via a hardened gear system.
  • Upper roll swings out to allow easy removal of finished metal roll
  • Easy and accurate adjustment of all 3 independently-mounted rolls to accommodate varying material thicknesses and bend profiles
  • Mobile control panel with 3 position foot pedal (including emergency stop)

    • SPECIFICATIONS:
    Maximum Material Width: 60 in. (5 ft)
    Maximum Material Capacity: 3 Gauge Mild Steel
    Roller Diameter: 5 in./130mm
    Minimum Bending Diameter: 7.7 in./195mm
    Motor: 3 HP
    Approx. Shipping Dimensions: 107 W x 26 D x 42 H in.
    Approx. Shipping Weight: 3,200 lbs.

    Specifications are subject to change without notice.
    NOTE: Data is provided by the manufacturer.
    WARRANTY: 1 YEAR – Limited

    VIDEO:
    Sheet Metal Machines YouTube Channel: Watch It Now

    The post HM MACHINERY 60 in. x 3 ga. Power Roll | HM MRM 1550-130 appeared first on Sheet Metal Machines.

    ]]>         HM MACHINERY HM-1300 Series Rear Support Table Attachment | HM-RST https://sheetmetalmachines.com/product/hm-machinery-hm-rst/ Tue, 23 Jan 2024 21:26:13 +0000 https://sheetmetalmachines.com/?post_type=product&p=8438 Quality European Machinery
    Discounted FREIGHT on the NEW HM Machines – Please call for discounted freight rate.
    Designed as an attachment for the 1300 Series brakes.
    The rear support table attachment is a helpful ergonomic addition.
    Very good when working with large sheets of material during fabrication.

    The post HM MACHINERY HM-1300 Series Rear Support Table Attachment | HM-RST appeared first on Sheet Metal Machines.

    ]]>
  • Designed as an attachment for the 1300 Series brakes, the rear support table attachment is a helpful ergonomic addition, especially when working with large sheets of material during fabrication.

    • For more information call us at (386) 304-3720

    Specifications are subject to change without notice.
    NOTE: Data is provided by the manufacturer.
    WARRANTY: 1 YEAR – Limited

    The post HM MACHINERY HM-1300 Series Rear Support Table Attachment | HM-RST appeared first on Sheet Metal Machines.

    ]]>         HM MACHINERY 20 ga. Roller Shear Attachment | HM-RS https://sheetmetalmachines.com/product/hm-machinery-hm-rs/ Tue, 23 Jan 2024 21:10:44 +0000 https://sheetmetalmachines.com/?post_type=product&p=8433 Quality European Machinery
    Discounted FREIGHT on the NEW HM Machines – Please call for discounted freight rate.
    Designed as an attachment for the 1300 Series brakes, the roller shear adds sheet cutting capability (up to 20g), making the machine even more versatile for sheet metal fabrication.

    The post HM MACHINERY 20 ga. Roller Shear Attachment | HM-RS appeared first on Sheet Metal Machines.

    ]]>
  • Designed as an attachment for the 1300 Series brakes, the roller shear adds sheet cutting capability (up to 20g), making the machine even more versatile for sheet metal fabrication.

    • For more information call us at (386) 304-3720

    Specifications are subject to change without notice.
    NOTE: Data is provided by the manufacturer.
    WARRANTY: 1 YEAR – Limited

    The post HM MACHINERY 20 ga. Roller Shear Attachment | HM-RS appeared first on Sheet Metal Machines.

    ]]>         HM MACHINERY 10 in. Tube Deburring Machine | HM ZP45 https://sheetmetalmachines.com/product/hm-machinery-hm-zp45/ Tue, 23 Jan 2024 20:47:44 +0000 https://sheetmetalmachines.com/?post_type=product&p=8432 Quality European Machinery
    Discounted FREIGHT on the NEW HM Machines - Please call for discounted freight rate.
    The HM Machinery ZP45 Tube Deburring Machine is a single rotary wheel design, designed for deburring the inside and outside of a tube simultaneously
    The ZP45 utilizes a wire wheel to debur most ferrous and nonferrous metals.
    Outlet at the rear of the machine to capture dust and debris.

    The post HM MACHINERY 10 in. Tube Deburring Machine | HM ZP45 appeared first on Sheet Metal Machines.

    ]]>
  • The HM Machinery ZP45 Tube Deburring Machine is a single rotary wheel design, designed for deburring the inside and outside of a tube simultaneously. The ZP45 utilizes a wire wheel to debur most ferrous and nonferrous metals.
  • 2 speed motor, spins the wire wheels between 1400 and 3300 RPM, depending on operator or material needs.
  • Adjustable height and fore/aft wheel position to dial in ergonomics for the user.
  • Adjustable material support to accommodate various tube sizes and profiles.
  • Adjustable shield above the work surface to ensure operator safety.
  • Outlet at the rear of the machine to capture dust and debris.

    • SPECIFICATIONS:
    Wire Wheel: 10 in. Diameter, 1.75 in. Wide
    Motor: 4HP, 2800/3300 RPM
    Wiring: 3 phase, 400V, 50hz
    Dimensions: 18 W x 17 L x 46 H in.
    Shipping Weight: 165 lbs.

    Specifications are subject to change without notice.
    NOTE: Data is provided by the manufacturer.
    WARRANTY: 2 YEAR

    OPTIONAL ITEMS: CALL FOR PRICE
    Dust extractor with a special mounting plate

    VIDEO:
    Sheet Metal Machines YouTube Channel: Watch It Now

    The post HM MACHINERY 10 in. Tube Deburring Machine | HM ZP45 appeared first on Sheet Metal Machines.

    ]]>         HM MACHINERY 3/8 in. Sheet Deburring Machine w/Duct Extractor | HM ZA 250X https://sheetmetalmachines.com/product/hm-machinery-hm-za250x/ Tue, 23 Jan 2024 20:19:00 +0000 https://sheetmetalmachines.com/?post_type=product&p=8431 Quality European Machinery
    Discounted FREIGHT on the NEW HM Machines - Please call for discounted freight rate.
    The HM Machinery ZA250X Sheet Deburring Machine is a dual wheel design, with integrated dust extraction, designed for deburring the edges of sheet or plate metal up to 10mm or 3/8 in. thick.
    Dual motors which rotate in opposite directions, and can debur either one edge, or both edges simultaneously with the 60 grit flap wheels.
    The ZA250X utilizes abrasive flap wheels to debur most ferrous and nonferrous materials, including mild steel, aluminum, stainless steel, copper, and brass.

    The post HM MACHINERY 3/8 in. Sheet Deburring Machine w/Duct Extractor | HM ZA 250X appeared first on Sheet Metal Machines.

    ]]>
    • The HM Machinery ZA250X Sheet Deburring Machine is a dual wheel design, with integrated dust extraction, designed for deburring the edges of sheet or plate metal up to 10mm or 3/8” thick. The ZA250X utilizes abrasive flap wheels to debur most ferrous and nonferrous materials, including mild steel, aluminum, stainless steel, copper, and brass.
    • Dual motors which rotate in opposite directions, and can debur either one edge, or both edges simultaneously with the 60 grit flap wheels.
    • The adjustable material support accommodates a wide range of sheet sizes, allowing flexibility for different projects or fabrication needs.
    • The top cover of the machine can be opened to grind or finish flat surfaces in addition to edge deburring.
    • The motors have adjustable positioning, which allows the operator keeps the flap wheels in a consistent position as they wear over time.
    • An integrated dust extraction system reduces dust and debris during deburring, and debris is collected in an easily emptied bag at the rear of the machine.

    • EQUIPPED WITH:

      • Dust extractor with a special mounting plate

    SPECIFICATIONS:
    Material Capacity: 10mm or 3/8 in. ferrous and non-ferrous sheet metal
    Flap Wheels: 2 in./60 grit
    Motor: 3/4 HP, 1400-1700 RPM
    Wiring: 3 phase, 230V, 60hz
    Dimensions: 22 W x 27 L x 50 H in.
    Shipping Weight: 155 lbs.

    Specifications are subject to change without notice.
    NOTE: Data is provided by the manufacturer.
    WARRANTY: 2 YEAR

    VIDEO:
    Sheet Metal Machines YouTube Channel: Watch It Now

    The post HM MACHINERY 3/8 in. Sheet Deburring Machine w/Duct Extractor | HM ZA 250X appeared first on Sheet Metal Machines.

    ]]>