• The V200HM-CTS band saw is operated by a touch screen control that is located in a swing-away console at the front of the saw and allows the operator to enter an angle and the arm will travel to that position and stop.
• Swing-Away Control Console w/ 7″ Touch Screen
• Powered Programmable Tilt w/ Angle Readout
• Vise – Full Stroking Main & 2nd Main
• Adjustable Clamping Force
• Broken Blade Function
• Carbide Blade Guides
• Guide Arm – Powered
• Electronic Controlled Traverse (Controls Feed Rate & Cutting Force)
• Variable Blade Speed w/ Readout on Touch Screen
• Forward Cut Stop
• Power Raised Lift Up Rollers
• Powered Blade Tension
• Chip/Swarf Removal System – Chip Conveyor
• Coolant System – Flood w/ Wash-Down Hose
• Blade Brush
• Blade Change Interlock
• Safety Guards
• 220V/3PH or 440V/3PH Electrical Motor Requirement – This is Not a Dual Voltage Machine

Item/Model: HEM V200HM-CTS

The post HE&M V200HM-CTS Semi-Automatic Vertical Bandsaw appeared first on Sheet Metal Machines.

• The V140 and VT140HM-60-CTS band saws vary from a vertical blade orientation on the V140 to a forward-canting blade on the VT140 version. The touch screen control, mounted in a swing-away console, allows the operator to enter an angle and the arm will travel to that position and stop.
• Swing-Away Control Console w/ 7″ Touch Screen
• Powered Programmable Tilt w/ Angle Readout
• Vise – Full Stroking Main
• Adjustable Clamping Force
• Carbide Blade Guides
• Guide Arm – Powered
• Variable Blade Speed w/ Readout on Touch Screen
• Electronic Controlled Traverse (Controls Feed Rate & Cutting Force)
• Idle Base Rollers – 1 Each Side of Base
• Powered Blade Tension
• Forward Cut Stop
• Coolant System – Flood w/ Wash-Down Hose
• Blade Brush
• Broken Blade Function
• Blade Change Interlock
• Safety Guards
• 220V/3PH or 440V/3PH Electrical Motor Requirement – This is Not a Dual Voltage Machine

Item/Model: HEM VT140HM-60-CTS

The post HE&M VT140HM-60-CTS Semi-Automatic Vertical Bandsaw appeared first on Sheet Metal Machines.

• The V140 and VT140HA-60-CTS are heavy-duty band saws only varying from a vertical blade orientation. The touch screen is mounted in a swing-away console. Jobs are stored in the PLC for later recall and use. A hydraulic 48” bar-feed standard; 48” or 120” servo-driven twin-screw bar-feeds are optional.
• Swing-Away Control Console w/ 8″ Touch Screen
• Computer Controlled Feed System
• Power Programmable Tilt from Touch Screen
• Vise – Full Stroking Main & Feed
• Adjustable Clamping Force
• Carbide Blade Guides
• Passive “Cut Watcher” System
• Electronic Controlled Traverse (Controls Feed Rate & Cutting Force)
• Forward Cut Stop
• Idle Base Rollers – 1 Each Side of Base
• Powered Blade Tension
• Guide Arm – Powered
• Variable Blade Speed w/ Readout on Touch Screen
• Coolant System – Flood w/ Wash-Down Hose
• Blade Brush
• Broken Blade Function
• Out-of-Stock Function
• Blade Saver
• Blade Change Interlock
• Safety Guards
• 220V/3PH or 440V/3PH Electrical Motor Requirement – This is Not a Dual Voltage Machine

Item/Model: HEM VT140HA-60-CTS

The post HE&M VT140HA-60-CTS Automatic Vertical Bandsaw appeared first on Sheet Metal Machines.

• The V140 and VT140HA-60-CTS band saws vary in vertical blade orientation on the V140 and forward-canting blade on the VT140. The touch screen control is mounted in a swing-away console and the PLC stores jobs. A hydraulic 48” bar-feed is standard; a 48” or 120” servo-driven twin-screw bar-feeds optional.
• Swing-Away Control Console w/ 8″ Touch Screen
• Computer Controlled Feed System
• Power Programmable Tilt from Touch Screen
• Vise – Full Stroking Main & Feed
• Adjustable Clamping Force
• Carbide Blade Guides
• Passive “Cut Watcher” System
• Electronic Controlled Traverse (Controls Feed Rate & Cutting Force)
• Forward Cut Stop
• Idle Base Rollers – 1 Each Side of Base
• Powered Blade Tension
• Guide Arm – Powered
• Variable Blade Speed w/ Readout on Touch Screen
• Coolant System – Flood w/ Wash-Down Hose
• Blade Brush
• Broken Blade Function
• Out-of-Stock Function
• Blade Saver
• Blade Change Interlock
• Safety Guards
• 220V/3PH or 440V/3PH Electrical Motor Requirement – This is Not a Dual Voltage Machine

Item/Model: HEM V140HA-60-CTS

The post HE&M V140HA-60-CTS Automatic Vertical Bandsaw appeared first on Sheet Metal Machines.

• The V140 and VT140HM-60-CTS band saws vary from a vertical blade orientation on the V140 to a forward-canting blade on the VT140 version. The touch screen control, mounted in a swing-away console, allows the operator to enter an angle and the arm will travel to that position and stop.
• Swing-Away Control Console w/ 7″ Touch Screen
• Powered Programmable Tilt w/ Angle Readout
• Vise – Full Stroking Main
• Adjustable Clamping Force
• Carbide Blade Guides
• Guide Arm – Powered
• Variable Blade Speed w/ Readout on Touch Screen
• Electronic Controlled Traverse (Controls Feed Rate & Cutting Force)
• Idle Base Rollers – 1 Each Side of Base
• Powered Blade Tension
• Forward Cut Stop
• Coolant System – Flood w/ Wash-Down Hose
• Blade Brush
• Broken Blade Function
• Blade Change Interlock
• Safety Guards
• 220V/3PH or 440V/3PH Electrical Motor Requirement – This is Not a Dual Voltage Machine

Item/Model: HEM V140HM-60-CTS

The post HE&M V140HM-60-CTS Semi-Automatic Vertical Bandsaw appeared first on Sheet Metal Machines.

• The VT100LM-60 will miter up to 60° in both directions. A self-contained hydraulic system powers the full stroking vise, arm tilt, and guide arm. Functions are operated from a touch screen control and the saw can be operated in manual or semi-automatic modes. Various options are available.
• Control Console w/ 7″ Touch Screen
• 4° Removable Arm Cant
• Powered Tilt w/ Angle Readout on Touch Screen
• Vise – Full Stroking Main
• Adjustable Clamping Force
• Carbide Blade Guides
• Guide Arm – Powered
• Variable Blade Speed w/ Readout on Touch Screen
• Air Powered Blade Tension
• Adjustable Feed Rate
• Adjustable Cutting Pressure
• Forward Cut Stop
• Coolant System – Flood w/ Wash-Down Hose
• Boltable Side Wings for Coolant Drainage
• Blade Brush
• Broken Blade Function
• Blade Change Interlock
• Safety Guards
• 220V/3PH or 440V/3PH Electrical Motor Requirement – This is Not a Dual Voltage Machine
• 85 PSI, 4-6 CFM Minimum Air Requirement (Equipped w/ Air Filter/Lubricator)

Item/Model: HEM VT100LM-60

The post HE&M VT100LM-60 Vertical Tilt-Frame Production Bandsaw appeared first on Sheet Metal Machines.

• One-Way 45° Miter
• Vise – Manual
• Manual Pull-Down
• Manual Miter
• Easy Blade Tensioning w/ Clutch Safety
• Adjustable 19.6″ Stop
• Dry Cutting
• Easy to Transport w/ Arm Locking Pin.
• Variable Blade Speed
• 115V Electrical Motor Requirement
• 1.6 HP Motor – 10.4 Amps

Item/Model: HEM 784XL

The post HE&M 784XL Benchtop Bandsaw appeared first on Sheet Metal Machines.

• The H160LA-DC band saw operates using a touch screen control mounted in a swing-away console. A 48” servo twin ball-screw bar-feed is standard. Jobs are created and stored for later recall. The patented Cut Watcher and Chip Auger are standard. Many optional features are available.

STANDARD EQUIPMENT:

• Smart Saw Control Console w/ 9″ Touch Screen
• Industrial IOT Ready – MTConnect Output
• 24″ Roller Discharge Table
• Vise – Full Stroking Main & Feed
• Adjustable Clamping Force
• Vise – 3rd on Feed
• Carbide Blade Guides
• Lead In/Lead Out Roller Guides
• Guide Arm – Powered
• Variable Blade Speed w/ Readout on Touch Screen
• Passive “Cut Watcher” System
• Adjustable Feed Rate
• Adjustable Cutting Pressure
• Powered Blade Tension
• Chip/Swarf Removal System – Chip Auger
• Coolant System – Flood w/ Wash-Down Hose
• Blade Brush
• Broken Blade Function
• Out-of-Stock Function
• Two-Hand Operation Controls
• Automatic Blade Idle
• Blade Change Interlock
• Safety Guards
• 220V/3PH or 440V/3PH Electrical Motor Requirement – This is Not a Dual Voltage Machine

Item/Model: HEM H160LA-DC

The post HE&M H160LA-DC Dual Column Bandsaw appeared first on Sheet Metal Machines.

• The H3236A-DC band saw operates using a touch screen control mounted in a swing-away console. A 48” servo twin ball-screw bar-feed is standard. Jobs are created and stored for later recall. The patented Cut Watcher and Chip Auger are standard. Many optional features are available.

STANDARD EQUIPMENT:

• Smart Saw Control Console w/ 9″ Touch Screen
• Industrial IOT Ready – MTConnect Output
• 24″ Roller Discharge Table
• Vise – Full Stroking Main & Feed
• Adjustable Clamping Force
• Carbide Blade Guides
• Lead In/Lead Out Roller Guides
• Guide Arm – Powered
• Passive “Cut Watcher” System
• Variable Blade Speed w/ Readout on Touch Screen
• Powered Blade Tension
• Adjustable Feed Rate
• Adjustable Cutting Pressure
• Vise – 3rd on Feed
• Chip/Swarf Removal System – Chip Auger
• Coolant System – Flood w/ Wash-Down Hose
• Two-Hand Operation Controls
• Broken Blade Function
• Out-of-Stock Function
• Automatic Blade Idle
• Blade Change Interlock
• Safety Guards
• 220V/3PH or 440V/3PH Electrical Motor Requirement – This is Not a Dual Voltage Machine

Item/Model: HEM H3236A-DC

The post HE&M H3236A-DC Dual Column Bandsaw appeared first on Sheet Metal Machines.

• The DC4045 is operated using a touch screen control in a pedestal mounted console and can be operated in manual or semi-automatic modes. Full stroking variable-pressure vise and powered guide arm are standard along with other features. Active Cut Watcher is standard and options are available.

STANDARD EQUIPMENT:

• Pedestal Mounted Control Console w/ 9″ Touch Screen
• Industrial IOT Ready – MTConnect Output
• Servo Controlled Traverse (SCT)
• 8′ Powered Base
• Vise – Full Stroking Main
• Adjustable Clamping Force
• Carbide Blade Guides
• Active “Cut Watcher” System
• Guide Arm – Powered
• Variable Blade Speed w/ Readout on Touch Screen
• Powered Blade Tension
• Shadow Light System
• Coolant System – Flood w/ Wash-Down Hose
• Blade Brush
• Two-Hand Operation Controls
• Broken Blade Function
• Automatic Blade Idle
• Blade Change Interlock
• Safety Guards
• 220V/3PH or 440V/3PH Electrical Motor Requirement – This is Not a Dual Voltage Machine

Item/Model: HEM DC4045

The post HE&M DC4045 Dual Column Bandsaw appeared first on Sheet Metal Machines.