• Machine Capacity: 47″ x 55″ (1200 x 1400mm)
• Round (Tube or Solid): 47″ (1200mm)
• Production Level: High
• The DC-1400CNC Hercules high production, horizontal CNC band saws from DoALL are highly efficient, automatic, hydraulically controlled machines with multiple material feeds. Designed for vertical cuts, the DC-1400CNC is ideal for serial production in industrial settings. Thanks to the robust construction of the DC-1400CNC, it is possible to cut a wide range of full and profile materials including stainless and tool steel. In addition, the “box” or enclosed design provides very safe operation. A large variety of optional accessories are available to customize the machine for specific sawing requirements

STANDARD EQUIPMENT:

• Siemens saw control
• Work light
• Hydraulic band tension
• Automatic guide arm setting
• Automatic feed control with programmable feed rates
• Variable vise pressure control – Set of 2
• Power-driven, band brush
• Chain chip conveyor with large pan
• Automatic retraction of material in cycle for protection of carbide blades
• Dual acting index vice jaws for crooked stock
• Retractable stationary machine vice jaw
• Set up tools
• Complimentary DoALL cutting fluids package
• One DoALL bi-metal saw blade
• Instruction and parts manuals on CD or USB data stick

Item/Model: DoALL DC-1400CNC

The post DoALL DC-1400CNC Dual Column Table Band Saw appeared first on Sheet Metal Machines.

• Machine Capacity: 33.5″ x 40″ (850 x 1000mm)
• Round (Tube or Solid): 33.5″ (850mm)
• Production Level: Extreme
• The DC-1000CNC Hercules high production, horizontal CNC band saws from DoALL are highly efficient, automatic, hydraulically controlled machines with multiple material feeds. Designed for vertical cuts, the DC-1000CNC is ideal for serial production in industrial settings. Thanks to the robust construction of the DC-1000CNC, it is possible to cut a wide range of full and profile materials including stainless and tool steel. In addition, the “box” or enclosed design provides very safe operation. A large variety of optional accessories are available to customize the machine for specific sawing requirements.

STANDARD EQUIPMENT:

• Siemens saw control with touch screen display
• Work light
• Hydraulic band tension
• Work height sensor
• Automatic guide arm setting
• Automatic feed control with programmable feed rates
• Variable vise pressure control – Set of 2
• Power-driven band brush
• Chain chip conveyor with large pan
• Automatic retraction of material in cycle for protection of carbide blades
• Dual acting index vice jaws for crooked stock
• Retractable stationary machine vice jaw
• Tool kit
• Complimentary DoALL cutting fluids package
• One DoALL bi-metal saw blade
• Instruction and parts manuals on CD or USB data stick

Item/Model: DoALL DC-1000CNC

The post DoALL DC-1000CNC Dual Column Enclosed CNC Band Saw appeared first on Sheet Metal Machines.

• Machine Capacity: w 20” x h 20″ (510mm x 510mm)
• Machine Capacity Round: 20″ (510mm)
• Production Level: High
• Standard Features: Fully-Automated Siemens Controller, Dual Index Vise Jaws for Work Handling and Independent Drive Motors for Band, Hydraulics & Coolant Pump.
• The DC-510CNC Hercules high production metal cutting band saw from DoALL is designed to work well in industrial settings, where a fully automated solution is required. This saw is ideal for large metal parts production across any industry vertical.
• Thanks to the robust construction of the DC-510CNC it is possible to cut a wide range of full and profile materials including stainless and tool steel.
• The “box” or enclosed design provides a safer environment for both the operator, and other employees on the production floor. The DoALL DC-510CNC can be customized through the world class control system and various available optional accessories to meet your specific needs. Make sure to request a quote and one of our sawing specialists will help spec out the perfect machine.

STANDARD EQUIPMENT:

• Siemens control with touch screen display
• Automatic feed control with programmable feed rates
• Work light
• Worm chip conveyor for long chips including chip pan
• Variable vise pressure control – Set of 2
• Dual acting index vise jaws for crooked stock
• Hydraulic band tension
• Automatic retraction of material in cycle for protection of carbide blade
• Power-driven band brush
• Flood coolant
• Work height sensor
• Automatic guide arm setting
• One (1) complimentary DoALL bi-metal saw blade
• Programmable work height
• Tool kit
• Complimentary DoALL cutting fluids package
• Smart programming to automatically select cutting parameters based on material size and type
• Operation and parts manuals on CD or USB data stick

Item/Model: DoALL DC-510CNC

The post DoALL DC-510CNC Dual Column Enclosed CNC Band Saw appeared first on Sheet Metal Machines.

• Machine Capacity: w 24.5″ x h 21.5″ (620mm x 550mm)
• Machine Capacity Round: 21.5″ (550mm)
• Production Level: Extreme
• Standard Features: 20 HP, Ball Screw Drive, Siemens Digital Controls for All Functions, Enclosed Saw Head and Heavy Duty Construction
• The DC-620CNC Hercules II horizontal production band saw from DoALL is highly efficient, automatic production saw. The DC-620CNC operates with a 20 HP motor with servo controlled ball screw feed system for indexing and head fall using “SMART” Siemens touch screen controls.
• A heavy-duty enclosed design provides exceptional safety in high-traffic facilities. The DC-620CNC can be configured to work in industrial production environments – ranging from automotive to aerospace.

STANDARD EQUIPMENT:

• Siemens control with touch screen display
• Smart programming to automatically select cutting parameters based on material size and type
• Automatic material feed situated close to saw blade
• Automatic feed control with programmable feed rates
• Work light
• Worm chip conveyor for long chips including chip pan
• Variable vise pressure control – Set of 2
• Dual acting index vise jaws for crooked stock
• Hydraulic band tension
• Automatic feed of material into cutting zone
• Retractable stationary machine vice jaw
• Automatic retraction of material in cycle for protection of carbide blade
• Hydraulic blade clamping in saw guides
• Indexer and saw head movements using linear-leading ball screw and servo motor
• Dynamic adjustment of feed rate to ensure square-ness
• Power-driven band brush
• Automatic guide arm setting
• Programmable work heights
• Tool kit
• Operation and parts manuals on CD or USB data stick
• One (1) complimentary DoALL bi-metal saw blade
• Complimentary DoALL cutting fluids package
• Flood coolant

Item/Model: DoALL DC-620CNC

The post DoALL DC-620CNC Dual Column Ball Screw Band Saw appeared first on Sheet Metal Machines.

• Machine Capacity: 38″ x 40″ (960x1000mm)
• Round Tube: 40″ (1000mm)
• Production Level: Extreme
• The DoALL Olympia TDC-1000SA high production, horizontal tube cutting band saw from DoALL is a highly productive semi-automatic, hydraulically manipulated dual column machine. The TDC-1000SA offers a unique construction with three pulleys and blade that is 10° cant to guarantee high-efficiency cutting. The TDC-1000SA is designed for vertical cuts and is ideal for cutting all types of tube and pipe. The DoALL TDC-1000 features robust construction which enables the ability to cut wide range of materials including, but not limited to stainless and tool steel. A large variety of optional accessories are available to customize the machine for specific sawing requirements.

STANDARD EQUIPMENT:

• Siemens control with touch screen display
• Automatic feed control with programmable feed rates
• Work light
• Variable vise pressure control
• Hydraulic band tension
• Flood coolant
• Power-driven band brush
• Operation and parts manuals on CD or USB data stick
• Tool kit
• Complimentary DoALL cutting fluids package
• One (1) complimentary DoALL bi-metal saw blade

Item/Model: DoALL TDC-1000SA

The post DoALL TDC-1000SA Dual Column Tube Band Saw appeared first on Sheet Metal Machines.

• Machine Capacity: w 28″ x h 30″ (700 x 750mm)
• Machine Capacity Round: Tube or Solid – 28″ (700mm)
• Production Level: Extreme
• Standard Features: Variable Vise Pressure, Fully-Automatic Siemens Digital Controls and Automatic Material Retraction
• The DC-750CNC Hercules offers fully-automatic operations which improve the performance of your production. All machine operations are hydraulically controlled, including indexing and feed. Once the Siemen’s digital control is programmed to the required specifications, the operator only needs to monitor the progress of parts cutting.
• The DC-750CNC is equipped with a 15 HP ball screw driven band drive and independent drive motors for the coolant pump and the hydraulic systems – sacrificing none of the cutting power to drive accessories.
• The DoALL Hercules line is fully enclosed to improve the safety in your facility.

STANDARD EQUIPMENT:

• Siemens control with touch screen display
• Automatic feed control with programmable feed rates
• Work light
• Chain chip conveyor including chip pan with drain
• Retractable stationary machine vice jaw
• Dual acting index vise jaws for crooked stock
• Hydraulic band tension
• Automatic retraction of material in cycle for protection of carbide blade
• Variable vise pressure control – Set of 2
• Programmable work height
• Automatic guide arm setting
• Power-driven band brush
• Tool kit
• Flood coolant
• Operation and parts manuals on CD or USB data stick
• Complimentary DoALL cutting fluids package
• One (1) complimentary DoALL bi-metal saw blade
• Automatic retraction of material in cycle for protection of carbide blade
• Hydraulic blade clamping in saw guides

Item/Model: DoALL DC-750CNC

The post DoALL DC-750CNC Dual Column Enclosed CNC Band Saw appeared first on Sheet Metal Machines.

• Machine Capacity: w 36″ x h 20″ (914mm x 381mm)
• Production Level: High
• Speed: High-Speed
• Specialty: Exotic Materials
• The DoALL Zephyr high velocity band saw machine features production cutting rates up to 30 times faster than conventional band saws.
• The ZV-3620 has a 15-hp AC inverter band drive with soft motor start and dynamic braking system. With speeds of 1,000 to 4,000 fpm, 4,000 to 8,000 fpm, or 10,000 to 15,000 fpm, this is the ideal saw for friction cutting applications – including exotic materials, such as Titanium and Inconel.
• If you’re looking for the one vertical contour band saw to take on any task, the DoALL Zephyr is the most comprehensive and dependable model on the market. DoALL has been producing these machines at our local facility in Minnesota for over 40 years! We’re confident that you will not want to use another vertical band saw after running a Zephyr.
• Column Mounted Controls-Column mounted controls give the operator easy access to band start and blade speed insuring their hands are away from the blade at band start.
• Variable Frequency Band Drive-Band drive is comprised of a electric variable frequency drive controlled motor transferring power thru our time honored, gear driven, 2 speed transmission giving maximum torque to the tooth tips of the sawblade reducing band stall and tooth strippage.
• Hydraulic Powered Post-Easy to operate hydraulic post allows the operator to keep the upper saw guide block as close to the top of the material being cut without getting their hands close to the blade during adjustment. Proper positioning minimizes the possibility of band deflection increasing band life and safety.
• Bandwheels-Cast aluminum, crowned bandwheels, are supplied with rubber tires to minimize wheel wear and insure proper band tracking. The tires allow for minimum damage to the set of your saw band.
• Manual Band Tension-Proper blade tension is manually set to a factory installed indicator which covers all widths of saw bands. This indicator will prevent the possibility of over/under tightening of the sawband for maximum cutting rates and extended band life.
• Band Tracking System-Lever tracking mechanism allows for ease of blade alignment on band wheels reducing band fatigue by assuring proper support to the back of the saw band.
• Saw Guide-Machine is equipped with one set of DoALL High-Speed, Type 3, saw guide blocks and rollers which will handle 1” saw band. These will allow proper support to the side and back of the band minimizing deflection due to overfeed conditions in high band speed operations.
• Safety Systems-Band door interlocks prevent the starting of the saw band while the doors are open. They will also stop the band drive if the doors open during operation which protects the operator from being exposed to a moving band. The upper wheel has a hydraulic actuated disk brake, which is applied when band breakage occurs preventing operator injury. The lower wheel is controlled by a dynamic brake, which is applied at band drive deactivation preventing operator injury.
• 10 year manufacturer’s warranty available (DoALL Cut Above 10 Year Warranty).

STANDARD EQUIPMENT:

• Table tilt to 45 degrees negative – 5 degrees positive
• 36″ Crowned aluminum bandwheels with replaceable rubber tires
• Upper wheel adjustment 3″
• Operator controls mounted on column
• One set of high speed, type 3 guide blocks with 1″ rollers
• Work light
• Variable frequency band drive
• Tapered high-speed roller bearing spindles
• Manual band tension with indicator
• Hydraulic upper saw guide post
• Dust spout for exhaust connection
• Spark guard
• Saw blade guards
• Band door interlocks
• Operation and parts manuals on USB stick
• Trunnion wrench
• One (1) complimentary DoALL Bi Metal saw blade

Item/Model: DoALL ZV-3620

The post DoALL ZV-3620 Vertical Contour Band Saw appeared first on Sheet Metal Machines.

• Machine Capacity: w 36″ x h 13″ (915mm x 330mm)
• Production Level: Medium/Intermediate
• Speed: High-Speed
• Standard features: 5 Hp Drive Motor, Work Light, Chip Blower and Post Elevating Hand Wheel
• Take all of the features and benefits of the 36XX Series of DoALL band saws and turn it up a notch with a higher-speed cutting rate for volume production applications.
• The DoALL 3613-V5 high speed, vertical contour band saw features a variable frequency 5 hp (3.75 kW) AC inverter drive controls that start the motion of the band wheels slowly to reduce mechanical shock and increase drive train life. As an additional safety feature for the operator, a dynamic braking function rapidly stops blade motion when power is shut-off – reducing kickback from materials and injury from the band saw blade.
• The 3613-V5 medium production, upright metal cutting band saw is widely used in locations that cut a large variety of materials in one production day. The 3613-V5 can also be used for plastics, wood and other materials – making it a flexible “work horse” for facilities that demand only the best finished products.
• Column Mounted Controls-Column mounted controls give the operator easy access to band start and blade speed insuring their hands are away from the blade at band start.
• Variable Frequency Band Drive-Band drive is comprised of an electric variable frequency drive controlled motor transferring power thru our time honored, gear driven, 2 speed transmission giving maximum torque to the tooth tips of the sawblade reducing band stall and tooth strippage.
• Post Elevating Handwheel-Easy to operate post elevating handwheel allows the operator to keep the upper saw guide block as close to the top of the material being cut without getting their hands close to the blade during adjustment. Proper positioning minimizes the possibility of band deflection increasing band life and safety.
• Bandwheels-Cast aluminum, crowned bandwheels, are supplied with rubber tires to minimize wheel wear and insure proper band tracking. The tires allow for minimum damage to the set of your saw band.
• Manual Band Tension-Proper blade tension is manually set to a factory installed indicator which covers all widths of saw bands. This indicator will prevent the possibility of over/under tightening of the sawband for maximum cutting rates and extended band life.
• High Band Speeds-The machine’s 5hp band motor and high-speed spindle allow for maximum cutting rates at higher speeds while sawing non-ferrous materials such as aluminum, plastics, wood, and rubber.
• Wheel Brush-the surface of the lower wheel minimizing damage to the lower wheel tire by reducing any chip buildup which may cause improper blade tracking.
• Saw Guide-Machine is equipped with one set of DoALL invented chevron type saw guide blocks and inserts which will handle 1/8-1/2” sawbands. These will allow proper support to the side and back of the band minimizing deflection due to overfeed conditions.
• Safety Systems-Band door interlocks prevent the starting of the saw band while the doors are open. They will also stop the band drive if the doors open during operation which protects the operator from being exposed to a moving band.
• 10 year manufacturer’s warranty available (DoALL Cut Above 10 Year Warranty Annual Investment).

STANDARD EQUIPMENT:

• Table tilt to 45 degrees negative – 10 degrees positive.
• 20″ Aluminum bandwheels with crowned rubber tires.
• Upper wheel adjustment 3″
• Operator controls mounted on column.
• One set of high speed, insert type guide blocks for bands 1/8″ to 1/2″
• Band wheel brush
• Variable frequency band drive.
• Work light
• Manual band tension with indicator.
• Post elevating hand wheel.
• Chip box
• Chip blower (plant air required)
• Saw blade guards.
• Band door interlocks.
• Operation and parts manuals on USB stick.
• Recommended job selector
• One (1) complimentary DoALL Bi Metal saw blade.
• Insert setting gages with wrench and trunnion wrench

Item/Model: DoALL 3613-V5

The post DoALL 3613-V5 High Speed Vertical Contour Band Saw appeared first on Sheet Metal Machines.

• Machine Capacity: w 36″ x h 13″ (915mm x 330mm)
• Production Level: Low
• Standard features: Work Light, Chip Blower and Post Elevating Hand Wheel
• The DoALL 3613-V3 vertical contour band saw is perfect for operations which require flexibility and rugged dependability. The ease of use for the machine operator also makes this vertical band saw an excellent choice.
• The DoALL 3613-V3 can also be fitted with an optional blade welder, for sizing blades and doing contoured keyhole cuts on a variety of materials. The 3613-V3 offers a w 36″ by w 13″ (915mm x 330mm) cutting capacity with a tilting table that adjusts to meet a variety of needs.
• Powered by a variable frequency 3 hp (2.23kW) AC inverter drive motor, you won’t be lacking in performance when it’s needed to do the job at hand

STANDARD EQUIPMENT:

• One set of high-speed, insert-type guide blocks for bands 1/8″ to 1/2″ (1.5mm – 13mm)
• Band tension indicator
• One set of steel guide inserts for bands 1/4″, 3/8″ and 1/2″ (6mm, 9mm, 13mm)
• Job selector
• Band speed indicator reading in FPM
• Work light
• Post elevating hand wheel
• Chip blower – Requires 80 psi plant air
• Variable frequency AC drive
• Removable chip drawer
• Dual-range transmission
• Tool kit
• Operations and parts manuals on CD or USB data stick
• One (1) complimentary DoALL bi-metal saw blade

Item/Model: DoALL 3613-V3

The post DoALL 3613-V3 Vertical Contour Band Saw appeared first on Sheet Metal Machines.

• Machine Capacity: w 20″ x h 13″ (508mm x 330mm)
• Production Level: Medium/Intermediate
• Speed: High-Speed
• Standard features: Work Light, Chip Blower, Tilt Table and Post Elevating Hand Wheel
• The 2013-V5 DoALL high-speed, vertical contour band saw features 5 Hp variable frequency drive motor which allows the machine to change its band speed on-demand.
• It is perfect for medium-level production that requires the flexibility to cut nonferrous metals such as aluminum/copper in addition to wood/plastics, without needing several machines for each application; making the 2013-V5 upright metal cutting saw is among the most versatile w 20″ x h 13″ (508mm x 330mm) sawing machines on the market today
• Column Mounted Controls-Column mounted controls give the operator easy access to band start and blade speed insuring their hands are away from the blade at band start.
• Variable Frequency Band Drive-Band drive is comprised of a electric variable frequency drive controlled motor transferring power thru a high speed spindle assembly directly to the lower wheel providing maximum torque to the tooth tips of the sawblade reducing band stall and tooth strippage.
• Post Elevating Handwheel-Easy to operate post elevating handwheel allows the operator to keep the upper saw guide block as close to the top of the material being cut without getting their hands close to the blade during adjustment. Proper positioning minimizes the possibility of band deflection increasing band life and safety.
• Bandwheels-Cast aluminum, crowned bandwheels, are supplied with rubber tires to minimize wheel wear and insure proper band tracking. The tires allow for minimum damage to the set of your saw band.
• Manual Band Tension-Proper blade tension is manually set to a factory installed indicator which covers all widths of saw bands. This indicator will prevent the possibility of over/under tightening of the sawband for maximum cutting rates and extended band life.
• High Band Speeds-The machines 5hp band motor and high speed spindle allow for maximum cutting rates at higher speeds while sawing non ferrous materials such as aluminum, plastics, wood, and rubber.
• Wheel Brush-A strategically mounted replaceable nylon wheel brush cleans the surface of the lower wheel minimizing damage to the lower wheel tire by reducing any chip buildup which may cause improper blade tracking.
• Saw Guide-Machine is equipped with one set of DoALL invented chevron type saw guide blocks and inserts which will handle 1/8-1/2” sawbands. These will allow proper support to the side and back of the band minimizing deflection due to overfeed conditions.
• Safety Systems-A unique transmission lock out system prevents shifting between high and low speed while the band is running. Preventing gear stripping and shiftfork damage. Band door interlocks prevents the starting of the saw band while the doors are open. They will also stop the band drive if the doors open during operation which protects the operator from being exposed to a moving band.
• 10 year manufacturer’s warranty available (Cut Above Lifetime Warranty)

STANDARD EQUIPMENT:

• Table tilt to 45 degrees negative – 10 degrees positive.
• 20″ Aluminum bandwheels with crowned rubber tires.
• Upper wheel adjustment 3″
• Operator controls mounted on column.
• One set of high speed, insert type guide blocks for bands 1/8″ to 1/2″
• One set of steel guide inserts for bands 1/4″, 3/8″, 1/2″
• Band wheel brush
• Variable frequency band drive.
• Work light
• Manual band tension with indicator.
• Post elevating hand wheel.
• Chip box
• Chip blower (plant air required)
• Saw blade guards.
• Band door interlocks.
• Operation and parts manuals on USB stick.
• Recommended job selector
• One (1) complimentary DoALL Bi Metal saw blade.
• Insert setting gages with wrench and trunnion wrench

Item/Model: DoALL 2013-V5

The post DoALL 2013-V5 High Speed Contour Band Saw appeared first on Sheet Metal Machines.