Baileigh - Sheet Metal Machines

BAILEIGH WJ-85CNC 60 x 98 in. 3-Axis CNC Flying Arm Waterjet w/Direct Drive Pump

lt2@sierravictor.com — Mon, 01 Sep 2025 21:24:48 +0000

The WJ-85CNC Water Jet from Baileigh Industrial offers excellent work table accessibility on a machine built for the rigors of waterjet cutting. The cutting table and framework of the WJ-85CNC is laser cut and interlocked, then welded for strength and rigidity to ensure accuracy during the cutting process. The design is a cantilever design that allows for much easier material loading and unloading. This CNC water jet cutting machine also offers smoother action on the axis with exclusion of moving parts. All axis ride on precision balls screws with square slide ways. All slide ways are covered and protected from water for long life.
Because of the smooth action of the gantry, this water jet has the ability to cut just about any material with precision. This includes glass, granite, ceramic, plastic, foam, mild steel, stainless steel, titanium, aluminum, and copper in its 60” x 96” table. To help keep maintenance to a minimum, Every WJ-85CNC includes our own proprietary abrasive auto feed system that is coupled with a 55,000psi Hammelmann direct drive pump. This system is unique to the Baileigh Industrial line and offers a low maintenance approach to water jet cutting. Controlling the WJ-85CNC Water Jet Baileigh Industrial could not be easier. The Water Jet saw includes an easy to use windows based stand alone operator console. This programmer will support DXF.
Suggested Machine Layout:
BobCAD-Cam V29 Express Design Software (Included)
The WJ-85CNC comes standard with BobCAD-Cam Express programming software. You can design or plot out your project on any computer and load the plasma table via a USB drive.

SPECIFICATIONS:

Working Area	60 x 98 in.
Air Pressure (PSI)	30 psi
CNC System	Windows Based
Cutting Accuracy	±.001 in.
Filter Type	2 Stage/2 Filter, 10 Micron & 1 Micron
Hopper Capacity	250
Input Power	460V / 3-phase, 60amp
Max Orifice Size	0.014
Motor Output Wattage	30.0000
Number Of Filters	2.0000
Production Pressure	56000
X-Axis Travel	98 in.
Y-Axis Travel	59 in.
Z-Axis Travel	6.75 in.
Software	BobCAD Cam
Supported File Formats	DXF
Net Weight	5,600 lbs
Gross Weight	5,600 lbs
Shipping Dimensions (L x W x H)	153 x 46 x 80, 112 x 73 x 36, 69 x 44 x 25 in.
Prop 65	Cancer and Reproductive Harm

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

WARRANTY: 1 YEAR – Parts

The post BAILEIGH WJ-85CNC 60 x 98 in. 3-Axis CNC Flying Arm Waterjet w/Direct Drive Pump appeared first on Sheet Metal Machines.

BAILEIGH WJ-512CNC 60 x 144 in. 3-Axis CNC Flying Arm Waterjet w/Direct Drive Pump

lt2@sierravictor.com — Mon, 01 Sep 2025 21:11:08 +0000

The WJ-512CNC industrial water jet cutter from Baileigh Industrial is a great value for anyone looking to get into water jet cutting. This great machine has the ability to cut just about any material with precision. This includes glass, granite, ceramic, plastic, foam, mild steel, stainless steel, titanium, aluminum, and copper in its 60″ x 144″ table.
The design is a cantilever design that allows for much easier material loading and unloading.
This design also offers smoother action on the axis with exclusion of moving parts. All axis ride on precision balls screws with square slide ways. All slide ways are covered and protected from water for long life.
The frame of the WJ-512CNC is laser cut and interlocked, then welded for strength, rigidity, and accuracy.
BobCAD-Cam Express Design Software (Included)
The WJ-512CNC comes standard with BobCAD-Cam Express programming software. You can design or plot out your project on any computer and load the plasma table via a USB drive. To learn more or download a free trial, click the BobCAD-Cam logo above.
Every WJ-512CNC industrial water jet cutter includes our own proprietary abrasive auto feed system that is coupled with a powerful 55,000psi Jekran direct drive pump
This system is unique to the Baileigh Industrial line an offers a low maintenance approach to water jet cutting
To control the WJ-512CNC industrial water jet table, Baileigh Industrial includes an easy-to-use windows-based operator touchscreen
This programmer supports any DXF file
Backed by Baileigh 1 Year Warranty

SPECIFICATIONS:

Working Area	60 x 144 in.
Air Pressure (PSI)	30 psi
CNC System	Windows Based
Cutting Accuracy	±.001 in.
Filter Type	2 Stage/2 Filter, 10 Micron & 1 Micron
Hopper Capacity	250
Input Power	460V / 3-phase, 60amp
Max Orifice Size	0.014
Motor Output Wattage	30.0000
Number Of Filters	2.0000
Production Pressure	55,000 psi (38,000 bar)
Z-Axis Travel	6.75 in.
Software	BobCAD Cam
Supported File Formats	DXF
Net Weight	7,555 lbs
Gross Weight	7,555 lbs
Prop 65	Cancer and Reproductive Harm

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

WARRANTY: 1 YEAR – Parts

The post BAILEIGH WJ-512CNC 60 x 144 in. 3-Axis CNC Flying Arm Waterjet w/Direct Drive Pump appeared first on Sheet Metal Machines.

BAILEIGH WJ-4X4CNC 47 x 47 in. 3-Axis CNC Flying Arm Waterjet w/Direct Drive Pump

lt2@sierravictor.com — Mon, 01 Sep 2025 21:06:05 +0000

The WJ-4x4CNC Water Jet from Baileigh Industrial is a great value for anyone looking to get into water jet cutting. This great machine has the ability to cut just about any material with precision. This includes glass, granite, ceramic, plastic, foam, mild steel, stainless steel, titanium, aluminum, and copper in its 48″ x 48″ table.
The design is a cantilever design that allows for much easier material loading and unloading.
This design also offers smoother action on the axis with exclusion of moving parts. All axis ride on precision balls screws with square slide ways. All slide ways are covered and protected from water for long life.
The frame of the WJ-4x4CNC is laser cut and interlocked, then welded for strength, rigidity, and accuracy.
Every WJ-4x4CNC includes our own proprietary abrasive auto feed system that is coupled with a powerful 55,000psi Jekran direct drive pump
This system is unique to the Baileigh Industrial line and offers a low maintenance approach to water jet cutting
To control the WJ-4x4CNC water jet Baileigh Industrial includes an easy-to-use windows-based operator touchscreen – This programmer will support any DXF file
The WJ-4x4CNC comes standard with BobCAD-Cam Express programming software, so you can design or plot out your project on any computer and load the plasma table via a USB drive
Covered by a 1-year parts warranty. We provide lifetime technical support by phone.

SPECIFICATIONS:

Working Area	47 x 47 in.
Air Pressure (PSI)	30 psi
CNC System	Windows Based
Cutting Accuracy	±.001 in.
Filter Type	2 Stage/2 Filter, 10 Micron & 1 Micron
Hopper Capacity	250
Input Power	460V / 3-phase, 60amp
Max Orifice Size	0.014
Motor Output Wattage	30.0000
Number Of Filters	2.0000
Production Pressure	56000
X-Axis Travel	48 in.
Y-Axis Travel	48 in.
Z-Axis Travel	6.75 in.
Software	BobCAD Cam
Supported File Formats	DXF
Net Weight	4,000 lbs
Gross Weight	4,000 lbs
Shipping Dimensions (L x W x H) (In.)	107 x 49 x 75 in. and 64 x 64 x 71 in.
Prop 65	Cancer and Reproductive Harm

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

WARRANTY: 1 YEAR – Parts

The post BAILEIGH WJ-4X4CNC 47 x 47 in. 3-Axis CNC Flying Arm Waterjet w/Direct Drive Pump appeared first on Sheet Metal Machines.

BAILEIGH PT-105HD-W-V2 5×10 ft CNC Plasma Cutting Water Table

lt2@sierravictor.com — Mon, 12 Aug 2024 17:35:00 +0000

Our PT-105HD-W includes a water bath and has the structural strength to handle 5′ x 10′ sheets. Automatic height detection is ideal for production runs. It arrives nearly fully assembled and comes with software.
Runs on 220-volt single-phase power.
Includes integrated water bath for cooler cutting and less airborne mess.
Control the X, Y, and Z axis movement from the sturdy podium with large console screen and keypad.
Includes easy-to-learn design software that you can load into any basic PC (more details below).
Console offers a pre-loaded library of shapes that you can resize and alter at the table—without a computer.
Automatic height detection on the Z-axis makes perfect cuts in corrugated or uneven materials.
Panasonic brushless servo motors, controlled by Panasonic servo motion controllers, drive the gantry.
Industrial-grade gantry travel system for the X, Y & Z axis made from extremely rigid structural steel.
Gantry can move out of the way for a full 10-foot sheet during loading, minimizing the chance of machine damage.
High gantry (one of the highest in the industry) lets you clearly see its movement for better adjustment and control.

SPECIFICATIONS:
Drive: Servo Motor
Input Power: 220V / 1-phase
Table Dimensions (In.): 60 x 140 in.
Software: BobCAD-CAM
Gross Weight: 4,705 lbs.
Machine Weight (lbs.): 4,000 lbs.
Shipping Dimensions (L x W x H) (In.): 180 x 97 x 75 and 69 x 44 x 29
Prop 65: Cancer and Reproductive Harm

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post BAILEIGH PT-105HD-W-V2 5×10 ft CNC Plasma Cutting Water Table appeared first on Sheet Metal Machines.

BAILEIGH PT-105HD-V2 5×10 ft CNC Plasma Cutting Table

lt2@sierravictor.com — Mon, 12 Aug 2024 17:22:00 +0000

Our PT-105HD-V2 is the next generation of our plasma tables, it has the structural strength to handle 5′ x 10′ sheets. Automatic height detection is ideal for production runs. It arrives nearly fully assembled and comes with the software. For our version with an integrated water bath, see the Baileigh 60” x 140” CNC Plasma Table PT-105HD-W.
Plasma torch systems are sold separately. We’ll let you choose the Thermal Dynamics Cutmaster model that works best for your application. This table is compatible with automatic torches, but not manual ones.
BOBCAD-CAM EXPRESS DESIGN SOFTWARE (INCLUDED)
The PT-105HD comes standard with BobCAD-Cam Express programming software. You can design or plot out your project on any computer and load the plasma table via a USB drive.
Runs on 220-volt single-phase power.
Control the X, Y, and Z-axis movement from the sturdy podium with a large console screen and keypad.
Includes easy-to-learn design software that you can load into any basic PC (more details below).
The console offers a pre-loaded library of shapes that you can resize and alter at the table—without a computer.
Panasonic brushless servo motors, controlled by Panasonic servo motion controllers, drive the gantry.
Gantry can move out of the way for a full 10-foot sheet during loading, minimizing the chance of machine damage.
High gantry (one of the highest in the industry) lets you clearly see its movement for better adjustment and control.
Axes ride on heavy-duty Hiwin square rails.
Wipers on rails keep welding dust out of the slide for a smooth transfer without noisy friction caused by dirt build-up.
Our design reduces the risk of damaging the table while loading or pinching your forklift—unlike competing plasma tables with recessed work areas.

SPECIFICATIONS:
Drive: Servo Motor
Input Power: 220 Volt Single Phase
Table Dimensions (In.): 60 x 140 in.
Travel Speed (FPM): 315 Inches Per Minute
Software: BobCAD-CAM
Gross Weight: 4,000 lbs.
Machine Weight (lbs.): 3,520 lbs.
Shipping Dimensions (L x W x H) (In.): 160 x 102 x 68 in.
Prop 65: Cancer and Reproductive Harm

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post BAILEIGH PT-105HD-V2 5×10 ft CNC Plasma Cutting Table appeared first on Sheet Metal Machines.

BAILEIGH PT-48AH-W 4×8 ft CNC Plasma Cutting Table

lt2@sierravictor.com — Mon, 12 Aug 2024 17:02:00 +0000

With variable height control, the PT-48AH-W makes perfect cuts in uneven material. This CNC plasma table comes assembled with a heavy steel frame and includes design software.
To get started just:
- Uncrate the machine.
- Add a plasma system, power, and a clean, dry air supply.
- Fill tank with water.
Industrial plasma cutter Covered by a 1-year parts warranty.
We keep most replacement parts in stock for quick shipping.
You can depend on lifetime technical support by phone from our team of knowledgeable reps.
Plasma torch systems sold separately. We’ll let you choose the Thermal Dynamics Cutmaster model that works best for your application. This CNC plasma cutting machine is compatible with automatic torches, but not manual ones.
BobCAD-Cam Express Design Software (Included)
The PT-48AH-W comes standard with BobCAD-Cam Express programming software. You can design or plot out your project on any computer and load the plasma table via a USB drive. To learn more or download a free trial, click the BobCAD-Cam logo above.
Runs on 220-volt single-phase power with a 60″ x 100″ working area
You can control the X, Y, and Z axes using the integrated panel on the podium
Automatic height control is integrated into the operator’s panel, eliminating secondary systems found on many other tables
Operator’s podium provides space for plasma power unit even while cutting
If the material is uneven or puckers under the heat of the torch, the variable height control will rise or lower in real time while cutting
X, Y, and Z axes are controlled by quality stepper motors, allowing for fast and fluid movement
Fully enclosed wires and electronics prevent snags and tangles
Made of heavy-gauge boxed steel, this CNC plasma cutting machine can easily support large, thick industrial-sized sheets of metal
Ground, hardened, and polished square rails combined with linear orbital bearings add impressive strength to the machine
Integrated water table helps control smoke and dust created while cutting to help keep your shop clean

SPECIFICATIONS:
Approx. Pressure (Tons): Depends on Plasma System Chosen
Drive: Stepper Motor
Input Power: 220V / 1-phase
Table Dimensions (In.): 67 x 120 in. (1702 x 3048mm)
Table Height (In.): 19.6 in. (500mm)
Z-Axis Travel (In.): 3.4 in. (86mm)
Software: BobCAD-Cam Express software included
Shipping Dimensions (L x W x H) (In.): 142 x 90.5 x 52 in.
Gross Weight: 2,250 lbs.
Machine Weight (lbs.): 3,021 lbs. (1370kg)
Prop 65: Cancer and Reproductive Harm

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post BAILEIGH PT-48AH-W 4×8 ft CNC Plasma Cutting Table appeared first on Sheet Metal Machines.

BAILEIGH PT-44AH-W 4×4 ft CNC Plasma Cutting Table

lt2@sierravictor.com — Mon, 12 Aug 2024 16:53:00 +0000

With variable height control, the PT-44AH-W makes perfect cuts in uneven material. This CNC plasma table comes assembled with a heavy steel frame and includes design software.
To get started just:
- Uncrate the machine.
- Add a plasma system, power, and a clean, dry air supply.
- Fill tank with water.
Industrial plasma cutter Covered by a 1-year parts warranty.
We keep most replacement parts in stock for quick shipping.
You can depend on lifetime technical support by phone from our team of knowledgeable reps.
Plasma torch systems sold separately. We’ll let you choose the Thermal Dynamics Cutmaster model that works best for your application. This CNC plasma cutting machine is compatible with automatic torches, but not manual ones.
BobCAD-Cam Express Design Software (Included)
The PT-44AH-W comes standard with BobCAD-Cam Express programming software. You can design or plot out your project on any computer and load the plasma table via a USB drive. To learn more or download a free trial, click the BobCAD-Cam logo above.
Runs on 220-volt single-phase power with a 59″ x 59″ working area
You can control the X, Y, and Z axes using the integrated panel on the podium
Automatic height control is integrated into the operator’s panel, eliminating secondary systems found on many other tables
Operator’s podium provides space for plasma power unit even while cutting
If the material is uneven or puckers under the heat of the torch, the variable height control will rise or lower in real time while cutting
X, Y, and Z axes are controlled by quality stepper motors, allowing for fast and fluid movement
Fully enclosed wires and electronics prevent snags and tangles
Made of heavy-gauge boxed steel, this CNC plasma cutting machine can easily support large, thick industrial-sized sheets of metal
Ground, hardened, and polished square rails combined with linear orbital bearings add impressive strength to the machine
Integrated water table helps control smoke and dust created while cutting to help keep your shop clean

SPECIFICATIONS:
Approx. Pressure (Tons): Depends on Plasma System Chosen
Drive: Stepper Motor
Input Power:220V / 1-phase
Table Dimensions (In.): 67 x 64 in.(1702 x 1626mm)
Table Height (In.): 19.6 in. (500mm)
Z-Axis Travel (In.): 3.4 in. (86mm)
Software: BobCAD-Cam Express software included
Shipping Dimensions LxWxH: 90.5 x 90.5 x 52 in.
Shipping Weight: 2,293 lbs.
Gross Weight: 2,450 lbs.
Prop 65: Cancer and Reproductive Harm

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post BAILEIGH PT-44AH-W 4×4 ft CNC Plasma Cutting Table appeared first on Sheet Metal Machines.

BAILEIGH PT-22 2×2 ft CNC Plasma Cutting Table

lt2@sierravictor.com — Thu, 08 Aug 2024 21:46:00 +0000

With a steel frame, this CNC Plasma Cutting Table delivers a lot of value for its price. We include features that other brands consider upgrades, like design software and a water bath. Order this 2 x 2 Plasma Table for your application today!
Runs on 110-volt power and will work at almost any fabrication site in North America.
2’ x 2’ (610 x 610mm) cutting area.
Runs on 110V power with 6A, 60HZ , and 24″ x 24″ Cutting Area – 3/4 In. Mild Steel Capacity
Comes fully assembled with correct alignment. No need to spend hours building.
Most other companies’ plasma tables come in 5 or 6 boxes and cost about as much to ship as Baileigh’s larger single box shipment.
Includes user-friendly programming software (see more details below).
You can control the torch using the handheld panel with a jog dial for the X and Y axes and program start and stop buttons.
Durable, high-quality stepper motors drive the X axis (single drive) and Y axis (dual drive).
All motor controllers and electronics are enclosed. No loose wires to get in your way.
Industrial cable track on the X axis ensures smooth cutting movement.
2 different torch-holders to accept both automated torches and handheld torches.
Pre-cut flat bar grates support the material.
Fully-welded steel frame will stay square for accurate cutting. By contrast, many competitors’ aluminum tables will warp due to heat over time.
Small footprint accommodates shops with limited space. You won’t find many competitors that make machines this compact.
5” caster wheels (2 stationary, 2 swiveling) let you move the table easily.
Water bath with a ball valve drain collects dirt, debris, and smoke. It also keeps the table cool to prevent material from moving while being cut.
Cabinet in the base with latched and hinged access doors.
Covered by a 1-year parts warranty.
Lifetime technical support by phone means that you can always count on troubleshooting and advice from an experienced rep.
550 lbs. shipping weight.
Plasma torch systems sold separately. We’ll let you choose the automatic or manual Thermal Dynamics Cutmaster model that works best for your application.
BobCAD-Cam Express Design Software (Included)
The PT-22 comes standard with BobCAD-Cam Express programming software. You can design or plot out your project on any computer and load the plasma table via a USB drive. To learn more or download a free trial, click the BobCAD-Cam logo above.

SPECIFICATIONS:
Approx. Pressure (Tons): Depends on Plasma System Chosen
Drive: Stepper Motor
Input Power: 110v
Table Dimensions (In.): 29 x 31 in.
Software: BobCAD Cam
Shipping Dimensions (L x W x H): 46 x 44 x 52 in.
Gross Weight: 580 lbs.
Weight: 590 lbs.
Prop 65: Cancer and Reproductive Harm

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post BAILEIGH PT-22 2×2 ft CNC Plasma Cutting Table appeared first on Sheet Metal Machines.

BAILEIGH EW-45 45 in. x 16 ga. Professional English Wheel

lt2@sierravictor.com — Mon, 20 May 2024 19:28:00 +0000

Looking for a reliable and heavy-duty English Wheel for your metalworking needs? Look no further than the Baileigh EW-45 English Wheel! Designed for use by metalworking craftsmen who specialize in the restoration of collectible cars, motorcycles, and airplanes, this machine is built to withstand even the toughest metalforming and shaping tasks. Equipped with a sturdy frame and an upper rolling wheel, the Baileigh EW-45 comes standard with four rolling wheels and ten lower anvil wheels, each with different crowns to create various radii. It can easily form beads and shapes aluminum and copper up to 1/8″ thick, as well as mild steel sheet metal up to 16 gauge. The polished wheels, which are supplied with sealed bearings, ensure smooth and precise operation every time. One of the standout features of the Baileigh EW-45 is its quick cam handle, which allows for easy and efficient release of the workpiece. Additionally, the machine features retractable wheels, making it simple to move around your shop as needed. Rolling wheels with a 6″ diameter ensure ample surface area for your metalworking projects, while the screw lift assembly is designed for both comfort and precise pressure setup.
The Baileigh EW-45 English Wheel also comes with storage brackets for both rolling and anvil wheels, and three sets of popular fender groove shaping wheels. Whether you’re a seasoned metalworking professional or just starting out, the Baileigh EW-45 English Wheel is an excellent investment for all your metalforming and shaping needs.
Recommended for: Restoration or bodywork on autos, planes, cycles, and much more.
16 gauge mild steel capacity.
45” throat depth can handle almost any project.
Comes with 4 upper wheels (6” x 2.75”)
10 hardened bottom anvils
All upper wheels and lower anvils use sealed bearings.
Swivel head lets you either push material directly into the throat or at a 90° to it
Quick-release cam allows you to release the panel without changing tension.
Adjust the tension via the kick tensioner, made of real rubber.
Fully welded 4.75” x 4.75” x .250” box tubing framework prevents flex when rolling at full capacity
Tooling holder on the side of the machine gives you a convenient place to put your rolls

SPECIFICATIONS:
Capacity (Mild Steel): 16 ga
Aluminum Capacity: 14 ga.
Throat Depth: 45″

Lower Die Radius:
⅛”, ½”, and ¾” edge radii. 6” crown radius.
2 flat rolls. 5/16” x ¼” step roll.
1½ ” and ⅝” round bead rolls

Top Wheel Dimensions: 6″ x 2-3/4″
Shipping Dimensions(L/W/H): CALL
Shipping Weight: 555 lbs.

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post BAILEIGH EW-45 45 in. x 16 ga. Professional English Wheel appeared first on Sheet Metal Machines.

BAILEIGH SBR-5216 4 ft x 16 ga. Shear Brake Roll

lt2@sierravictor.com — Mon, 20 May 2024 18:39:00 +0000

With a 16 gauge mild steel capacity for all functions, the SBR-5216 is the most powerful 3-in-1 combination machine on the market. This manual combination shear brake and roll saves space and money for small shops.
52” width lets you roll, bend, and shear 4’ x 8’ sheets.
Slip roll portion is on top, press brake in the middle, and sheet metal shear on the bottom.
1.70” minimum rolling diameter.
Hardened, adjustable back and top rolls can form different thicknesses.
Top roll can swing away from the machine for convenient material removal.
3 grooves on the roll can form wire or round rod.
Manual press brake section comes with a fixed bottom V-block die.
The SBR-5216 combination shear brake roller bends up to 90°, so you can make perfect corners.
9 movable fingers on the top beam can make many sizes of boxes and pans.
Crowning feature adjusts the camber of press brake tooling to make consistent bends across your material.
Shear portion includes a spring-loaded clamp or hold-down to keep the material from lifting up, extend blade life, improve cut quality.
You can adjust the blade gap to fit different gauges of sheet metal.
Includes a material guide.
Hardened, reversible blades stay sharp.
Manual back gauge helps you easily produce repeatable parts.
Heavy steel construction, weighing 1,200 lbs., gives this combo machine the power to deliver accurate results for many years.
The SBR-5216 combination shear brake and roll is covered by a 1-year parts warranty.
Our team of knowledgeable reps is here to provide lifetime technical support by phone.
Recommended for: Home shops, industrial art shops, maintenance or R&D shops, and other facilities where small production runs don’t justify dedicated machines for rolling, bending, and shearing.

SPECIFICATIONS:
Bed Width: 52 in. (4 ft)
Shear Capacity: 16 ga (.060 in.)
Bending Capacity: 16 ga (.060 in.)
Shear Capacity: 16 ga (.060 in.)
Shear Width: 4 x 8 ft. sheets
Max bend angle: 90 deg.
Min Rolling Diameter: 1.70 in.
Shipping Dimensions (L/W/H): 71 x 24 x 38 in.
Shipping Weight: 1,200 lbs
Prop 65: Cancer and Reproductive Harm

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

The post BAILEIGH SBR-5216 4 ft x 16 ga. Shear Brake Roll appeared first on Sheet Metal Machines.